about this ST@# phone s46 - GSM-Forum

fixedafone · 12-12-2003, 13:28

hi

people i have this siemens s46 which is dead now .it came for unlock tried flashing phone showed wrong software after that i tried changing imei no luck finally i got aeeprom dump which made the phone dead now the phone dont power on
what i feel is i need a full working same version flash file and eeprom file matching of course pls
pls urgently need ur kind atten
Also pls correct me if i am wrong

mail: prajeshdalal@hotmail.com
icq;151326140
msn

rajeshdalal@hotmail.com
thx in adv

Siemens man · 12-22-2003, 19:24

wich soft do you use??????

fixedafone · 12-26-2003, 08:23

hi i first used 5.1 allsiemens .though it didnt have have option to select s46 phone type .the phone showed wrong soft.after that i tried martech craked soft for writing s46 eeprom file the phone went dead.
i tried flashing with diff ver but phone fails to switch on
pls help
thx in adv

spyingblue · 12-29-2003, 20:56

Do you have the orignal S46 eeprom/flash file? Can you please post it, I would like to have a look at it..

icq: 15788100 | aim: spying00x
http://www.Lanpaq.com

fixedafone · 01-03-2004, 15:00

hi
i tried to read a full flash of 6mb and eeprom from aworking phone it stillfails to switch on
i guess i need a right soft for the phone to upload i have tried so far all siemens vygis martech cracked unisoft patch flashing

no use
pls help i have now 3 dead sets
thx in adv
regards
pd

unlockmax · 01-05-2004, 12:28

Gays try this link
I wish you good luck http://www.gsmvietnam.com/free/siemens/s46/

fixedafone · 01-07-2004, 09:02

hi guys

i have tried cracked martech 4.8 as well as 3.6. both the sof t made the phone dead.pls dont use it.
also i have tried to full flash the phone with 5.66 mb full back up file and flash and eeprom. but unsucessfull. i fact i tried with vygis soft with reding afull flash file working phone and rewriting the same the phones dead.
also important thing to note is that orig full flash file is i guess 8mb the phone swicthes on but will go off after showing insert card.
but after changing imei the phones dead again.
pls help for the soln also correct me if i am wrong
now the dead phone count is 3 phones now
regards
pd
icq:1513216140

fixedafone · 01-09-2004, 05:40

hi there

is there no one to work on this .still awaiting reply
finally i have something i guess u can repair this with martech soft only repair filebut unfortunately the phone now goes on for a sec and off within seconds writing imei too does nt help

if only someone take interect in the matter
i am sure it wil be great help for other fellow programmers

regards

pd
icq:151326140

dannyogolo · 09-01-2004, 19:40

Hi man,
Use SST commercial version, and write Any of the 2 Full repair flashes in the support area, and voila, phone works again.

**Syed** · 09-01-2004, 20:07

Quote:

Originally Posted by fixedafone

hi there

is there no one to work on this .still awaiting reply
finally i have something i guess u can repair this with martech soft only repair filebut unfortunately the phone now goes on for a sec and off within seconds writing imei too does nt help

if only someone take interect in the matter
i am sure it wil be great help for other fellow programmers

regards

pd
icq:151326140

he posted this in January, i am sure he would have fixed his phones by now... but still Prajesh .. if u still need the solution for this shi*ty phone S46???? contact me...u know where u need 2 call !!

WBR
Syed

12-12-2003, 13:28	#1 (permalink)
fixedafone Major Poster Join Date: May 2002 Location: south africa Posts: 47 Member: 12134 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	about this ST@# phone s46 hi people i have this siemens s46 which is dead now .it came for unlock tried flashing phone showed wrong software after that i tried changing imei no luck finally i got aeeprom dump which made the phone dead now the phone dont power on what i feel is i need a full working same version flash file and eeprom file matching of course pls pls urgently need ur kind atten Also pls correct me if i am wrong mail: prajeshdalal@hotmail.com icq;151326140 msn rajeshdalal@hotmail.com thx in adv

12-26-2003, 08:23	#3 (permalink)
fixedafone Major Poster Join Date: May 2002 Location: south africa Posts: 47 Member: 12134 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	s46 hi i first used 5.1 allsiemens .though it didnt have have option to select s46 phone type .the phone showed wrong soft.after that i tried martech craked soft for writing s46 eeprom file the phone went dead. i tried flashing with diff ver but phone fails to switch on pls help thx in adv

01-03-2004, 15:00	#5 (permalink)
fixedafone Major Poster Join Date: May 2002 Location: south africa Posts: 47 Member: 12134 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	same problem hi i tried to read a full flash of 6mb and eeprom from aworking phone it stillfails to switch on i guess i need a right soft for the phone to upload i have tried so far all siemens vygis martech cracked unisoft patch flashing no use pls help i have now 3 dead sets thx in adv regards pd

01-07-2004, 09:02	#7 (permalink)
fixedafone Major Poster Join Date: May 2002 Location: south africa Posts: 47 Member: 12134 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	s46 dead soln hi guys i have tried cracked martech 4.8 as well as 3.6. both the sof t made the phone dead.pls dont use it. also i have tried to full flash the phone with 5.66 mb full back up file and flash and eeprom. but unsucessfull. i fact i tried with vygis soft with reding afull flash file working phone and rewriting the same the phones dead. also important thing to note is that orig full flash file is i guess 8mb the phone swicthes on but will go off after showing insert card. but after changing imei the phones dead again. pls help for the soln also correct me if i am wrong now the dead phone count is 3 phones now regards pd icq:1513216140

01-09-2004, 05:40	#8 (permalink)
fixedafone Major Poster Join Date: May 2002 Location: south africa Posts: 47 Member: 12134 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	s46 soln hi there is there no one to work on this .still awaiting reply finally i have something i guess u can repair this with martech soft only repair filebut unfortunately the phone now goes on for a sec and off within seconds writing imei too does nt help if only someone take interect in the matter i am sure it wil be great help for other fellow programmers regards pd icq:151326140

12-22-2003, 19:24	#2 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 35 Posts: 5,809 Member: 3925 Status: Offline Thanks: 61 Thanked 23 Times in 23 Posts	wich soft do you use??????

12-29-2003, 20:56	#4 (permalink)
spyingblue Junior Member Join Date: May 2003 Location: Miami, FL Age: 36 Posts: 14 Member: 28874 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Do you have the orignal S46 eeprom/flash file? Can you please post it, I would like to have a look at it.. icq: 15788100 \| aim: spying00x http://www.Lanpaq.com

01-05-2004, 12:28	#6 (permalink)
unlockmax Freak Poster Join Date: May 2003 Posts: 273 Member: 30174 Status: Offline Thanks: 0 Thanked 5 Times in 5 Posts	Gays try this link I wish you good luck http://www.gsmvietnam.com/free/siemens/s46/

09-01-2004, 19:40	#9 (permalink)
dannyogolo No Life Poster Join Date: Nov 2002 Posts: 2,691 Member: 18200 Status: Offline Sonork: 100.1608286 Thanks: 44 Thanked 75 Times in 54 Posts	Hi man, Use SST commercial version, and write Any of the 2 Full repair flashes in the support area, and voila, phone works again.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode