Sx1 Winswup Patch_mem

[randomi]

Another release from Z-TEAM:

SX1 WINSWUP PATCH_MEM, utility to patch WINSWUP memory.

APPLYING EXISTING PATCH:
----------------------
 
When patcher is running, execute WINSWUP. Patcher will pick up the version of
the firmware and show it in "Current flash version:" area.
 
Load a patch (in .sxp format) or simply copy it into the text area.
 
Click "Apply patch". If there are any errors you are trying to patch
wrong version of firmware or using an old patch. After successful
operation, Status line will read "Patching OK".
 
You can now start flashing using WINSWUP.

CREATING NEW PATCH:
-------------------
 
Using any hex viewer that can show memory of running processes,
examine winswup memory. Once you have found what you want to change,
record the offset and sequence of bytes you want to change. In Patcher
enter them in format:
 
address:olddata:newdata
 
all in hexadecimal. Example:
 
303E050:5A:45 
 
To make your patch complete, copy the memory position that Patcher picked up. 
WARNING: without MP offset you patch will not work at all!

download

[beko2001us]

Thank you randomi for your post it really made things look more easier but I have 2 qestions if you please:
1- with this patch I don't need to copy the MBM file from Z to E right?
2- I didn't understand what is this point mean(To make your patch complete, copy the memory position that Patcher picked up.
WARNING: without MP offset you patch will not work at all!)Thanks for your help

[randomi]

1. you still need to copy MBM file from Z to E. or you could PREINSTALL Themerizer to E drive before flashing the patched firmware.
2. When you run patcher, there's a text box above patch text area. Caption says Current MP. When you load WINSWUP it automatically sets to a value, copy that value into the patch text area like:
MP:12B0000

It is only needed when you create your own patch. It allows Patcher to determine the correct offsets on different machines (winswup does not always load to the same position).

Clear enough?

[beko2001us]

Thank you randomi for your answer
now what I understand is:
1- copy the MBM file from Z to E
2- run the WINSWUP
3- run the patch
4-copy the MP:00000000 to the text area in the
5- apply the patch.
6-upload the firmware to my mobile.

Am I righ randomi.

I know I asked too much but I wish I just want to be sure b4 I start doing that.

Thank you again

[randomi]

1-3, 5-6 correct
for existing patch (included with patcher) you don't have to copy MP, it should already be there.
also, MP should never be 0000000

[beko2001us]

THANK YOU randomi

[flo_sb]

what is this patch for? (if you can, please explain with more details because i`m a newbie... )
thankyou!

[la_ostia]

it's to translate the mbm (multi bitmap file) who have the bmp you see up in your sx1, where the colock and the operator's logo are.

Original mbm is in z (rom) and this patch enable to puts it in e/c (Flash)

Now you can change your files, and put a "fullscreen" background.

More or less, it is.

[flo_sb]

that`s great !really nice thingy! (i was wondering if something like this is possible... ) but what happens with the clock shown in the background ?
10q

[Symbian]

i'm use wsmp103 patched FW15_russian (07102004-K1_SiemensvA114_signed.exe)

and found MP=1000000

in box

MP:1000000
176A118:5A:45
198D408:5A:45
305E050:5A:45
3281340:5A:45

and patch this

it's error OLD DATA[5A] <> MEMORY BLOCK address 176A118

windows 2000sp4

[manilola]

Originally Posted by la_ostia

it's to translate the mbm (multi bitmap file) who have the bmp you see up in your sx1, where the colock and the operator's logo are.

Original mbm is in z (rom) and this patch enable to puts it in e/c (Flash)

Now you can change your files, and put a "fullscreen" background.

More or less, it is.

finally it makes sense,thanx for the info!!!!