c35 problem , pls help me . - GSM-Forum

sunil9200 · 05-27-2003, 17:50

c35 is dead , please help me.

i am using all_siemens V 5.1 by Nutzo (English)
when i try to read the full flash, it gives the following msg;

Siemens Unlock V 5.1 by Nutzo (English)
----------------------------------------------------
COMM_LoadBoots : selected phone family is 0
TTY_OpenCOMPort : opening COM1
TTY_OpenCOMPort : baudrate is 57600, DTR is enabled, RTS is disabled
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_PreloadBoots : number of phone models in Archivo\data01.dat is 8
COMM_SendBoot : sending boot 0 for model 0
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 1 for model 0
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 2 for model 0
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 3 for model 0
COMM_SendBoot : waiting for boot ack
COMM_LoadBoots : Checking bootcode..
COMM_LoadBoots : internal loader version is 00.01
SEC_RecreateIMEI : original IMEI is 44919152484001
COMM_LoadBoots : found v0 (1)
COMM_LoadBoots : flash ids are 008988C4 [008988C4] - 0000
COMM_LoadBoots : phone ids are 53B84BB5 [00000000]
COMM_Read : reading from 00C00000 4194304 bytes
COMM_NormalReadFlashBlock : cannot read flash block 00C02C00 retrying
COMM_NormalReadFlashBlock : cannot read flash block 00C02C00 retrying
COMM_NormalReadFlashBlock : cannot read flash block 00C02C00 retrying
COMM_NormalReadFlashBlock : read error at 00C02C00 retrying
COMM_NormalReadFlashBlock : read error at 00C02C00 retrying
COMM_NormalReadFlashBlock : read error at 00C02C00
TTY_CloseCOMPort : Closing COM port

-------------------------

pls tell me what to do .

Sunil

brandiber · 05-28-2003, 19:33

Hi!
Is your battery completely charged?
Try zSiemenz to get your PhoneID (by Rizapn); post results here;
If it's not your battery, it's an hardware damage

sunil9200 · 05-29-2003, 05:45

FROM WHERE TO GET ZSIEMENS ? I DO NOT HAVE IT. GIVE ME LINK TO DOWNLOAD THE SAME.

THANX

SUNIL

heyamo · 06-01-2003, 01:13

you can find it from http://groups.yahoo.com/group/z-soft and you have to register to download the files

sunil9200 · 06-03-2003, 09:00

result of zsiemes is as under
------------------------------------

Connect to the phone using C35 method.
Press ON button ...
> Hello, anybody home ?
> OK. Introduce ourselves ...
> Good. We can discuss more closer ...
> Yes. We are ready, please WAIT ...
$ Found Flash ID = C489, Phone ID = B54BB853
# Completed after 1 seconds.

------------------------

pls suggest

thanx

sunil

sunil9200 · 06-07-2003, 11:34

i could flash my phone after hardware repairs .
It does not show display, after flashing and writing the map file after correcting the imei.

it gets powered on and i can see four leds at the bottom of the display glow.
after i press any key the LEDS( below the keypad ) are glowing.
But does show display, nor i get network.

pls help me.

thanks

Sunil

NNCome · 06-13-2003, 16:40

no LCD
Hardware:
lefth lcd con +Right lcd con komponen> check (lcd peripherals) 4 unsoldeed

what part did u fix..? SRAM?

ReviveR · 06-13-2003, 17:00

Try changing led/buzzer interface
Its on the front pcb side, down on the bottom of the phone, on the right edge, with 6 pins.....

NNCome · 07-24-2003, 01:37

try check the lcd contras before changing d' lcd,
sometime after upgrade/downgrade, the contas need 2b' set

05-27-2003, 17:50	#1 (permalink)
sunil9200 Freak Poster Join Date: Apr 2003 Location: MUMBAI,INDIA Age: 63 Posts: 190 Member: 27707 Status: Offline Thanks Meter: 6	c35 problem , pls help me . c35 is dead , please help me. i am using all_siemens V 5.1 by Nutzo (English) when i try to read the full flash, it gives the following msg; Siemens Unlock V 5.1 by Nutzo (English) ---------------------------------------------------- COMM_LoadBoots : selected phone family is 0 TTY_OpenCOMPort : opening COM1 TTY_OpenCOMPort : baudrate is 57600, DTR is enabled, RTS is disabled COMM_IsBootRunning : bootcode does not seem to be running COMM_LoadBoots : Waiting to power on the phone ... COMM_LoadBoots : phone is powered on COMM_PreloadBoots : number of phone models in Archivo\data01.dat is 8 COMM_SendBoot : sending boot 0 for model 0 COMM_SendBoot : waiting for boot ack COMM_SendBoot : sending boot 1 for model 0 COMM_SendBoot : waiting for boot ack COMM_SendBoot : sending boot 2 for model 0 COMM_SendBoot : waiting for boot ack COMM_SendBoot : sending boot 3 for model 0 COMM_SendBoot : waiting for boot ack COMM_LoadBoots : Checking bootcode.. COMM_LoadBoots : internal loader version is 00.01 SEC_RecreateIMEI : original IMEI is 44919152484001 COMM_LoadBoots : found v0 (1) COMM_LoadBoots : flash ids are 008988C4 [008988C4] - 0000 COMM_LoadBoots : phone ids are 53B84BB5 [00000000] COMM_Read : reading from 00C00000 4194304 bytes COMM_NormalReadFlashBlock : cannot read flash block 00C02C00 retrying COMM_NormalReadFlashBlock : cannot read flash block 00C02C00 retrying COMM_NormalReadFlashBlock : cannot read flash block 00C02C00 retrying COMM_NormalReadFlashBlock : read error at 00C02C00 retrying COMM_NormalReadFlashBlock : read error at 00C02C00 retrying COMM_NormalReadFlashBlock : read error at 00C02C00 TTY_CloseCOMPort : Closing COM port ------------------------- pls tell me what to do . Sunil

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K300 , joystick problem , Pls help me out	taimurarshad	Sony Ericsson Hardware Repair	1	05-21-2006 18:09
c225 hanging problem pls help me	moorthy	Trident/AGERE Platform	3	04-02-2006 18:14
Try to Flash 3310 5.87 to 6.33 but there problem pls help me	Galgu	Nokia Hardware & Hardware Repair	6	03-20-2005 11:32
t100 lcd and speaker problem - pls help me pray	Tbaba	Samsung Hardware Repair	4	02-21-2004 02:54
s25 problem pls help me	MaHuAk	x1x to x45/x50	0	06-11-2002 21:53

05-28-2003, 19:33	#2 (permalink)
brandiber Freak Poster Join Date: Mar 2003 Age: 42 Posts: 170 Member: 25693 Status: Offline Thanks Meter: 1	Hi! Is your battery completely charged? Try zSiemenz to get your PhoneID (by Rizapn); post results here; If it's not your battery, it's an hardware damage

05-29-2003, 05:45	#3 (permalink)
sunil9200 Freak Poster Join Date: Apr 2003 Location: MUMBAI,INDIA Age: 63 Posts: 190 Member: 27707 Status: Offline Thanks Meter: 6	FROM WHERE TO GET ZSIEMENS ? I DO NOT HAVE IT. GIVE ME LINK TO DOWNLOAD THE SAME. THANX SUNIL

06-01-2003, 01:13	#4 (permalink)
heyamo Junior Member Join Date: May 2003 Location: turkey Age: 46 Posts: 39 Member: 27983 Status: Offline Thanks Meter: 0	you can find it from http://groups.yahoo.com/group/z-soft and you have to register to download the files

06-03-2003, 09:00	#5 (permalink)
sunil9200 Freak Poster Join Date: Apr 2003 Location: MUMBAI,INDIA Age: 63 Posts: 190 Member: 27707 Status: Offline Thanks Meter: 6	result of zsiemes is as under ------------------------------------ Connect to the phone using C35 method. Press ON button ... > Hello, anybody home ? > OK. Introduce ourselves ... > Good. We can discuss more closer ... > Yes. We are ready, please WAIT ... $ Found Flash ID = C489, Phone ID = B54BB853 # Completed after 1 seconds. ------------------------ pls suggest thanx sunil

06-07-2003, 11:34	#6 (permalink)
sunil9200 Freak Poster Join Date: Apr 2003 Location: MUMBAI,INDIA Age: 63 Posts: 190 Member: 27707 Status: Offline Thanks Meter: 6	i could flash my phone after hardware repairs . It does not show display, after flashing and writing the map file after correcting the imei. it gets powered on and i can see four leds at the bottom of the display glow. after i press any key the LEDS( below the keypad ) are glowing. But does show display, nor i get network. pls help me. thanks Sunil

06-13-2003, 16:40	#7 (permalink)
NNCome Insane Poster Join Date: Feb 2003 Location: indonesia Age: 46 Posts: 78 Member: 23333 Status: Offline Thanks Meter: 0	no LCD Hardware: lefth lcd con +Right lcd con komponen> check (lcd peripherals) 4 unsoldeed what part did u fix..? SRAM?

06-13-2003, 17:00	#8 (permalink)
ReviveR No Life Poster Join Date: Oct 2002 Location: Novi Sad, Serbia Age: 44 Posts: 1,343 Member: 17193 Status: Offline Thanks Meter: 16	Try changing led/buzzer interface Its on the front pcb side, down on the bottom of the phone, on the right edge, with 6 pins.....

07-24-2003, 01:37	#9 (permalink)
NNCome Insane Poster Join Date: Feb 2003 Location: indonesia Age: 46 Posts: 78 Member: 23333 Status: Offline Thanks Meter: 0	try check the lcd contras before changing d' lcd, sometime after upgrade/downgrade, the contas need 2b' set