C45 - Real DEAD - GSM-Forum

p3x · 11-02-2002, 03:22

Hello all,

I have a real problem with my Siemens C45.
@ First it has a SimLock, i try to unlock it but after that, the Display shows only "Wrong Software".

After this misstake, I try to fix it with many tools...

(.log File, .map File create, than an Flash update, than a Softwareupdate, an so on.)

NOW, when i try to switch the Phone on, nothin' happens.
No Display Light no reaction. NOTHIN'

But the clou is, when I try to change the Imei or try to read the informations out of the phon, this things work.

(... connect the cable to the Phone, start the Programm, press the red Button, and it works...)

SO I think the Phone iss not really DEAD, but something is really complicated...

I would despair of this.

Drug_Store · 11-02-2002, 06:27

Flash your phone, and only then read log and create map...

Read old post...

Jacekpoland · 11-02-2002, 11:22

You have to flash your phone whit for example Siemens_All34_cracked_by_XzZ and than read log from phone whit Siemens IMEI Writer 4.02 or higher and then if you can't creat map post it in log reqest Best regards

uni_gsm_tech · 11-02-2002, 11:33

http://www.onurgsm.com/download/c45.zip

p3x · 11-02-2002, 12:49

Now, when I try to flash the Phone, the Programm "All3/4..." displays at least:

Waiting for CalcThread to exit...

and nothin' more happend.
I wait for about an hour, but nothin' happend.

Detail what the Prog says:

Flash HC = C489
SoftInfo = Ver. FF
Looking for hardware...
read_device_info() - OK
Calculating security data...
Waiting for CalcThread to exit...

*arghs*

Please Help...

p3x · 11-02-2002, 12:54

OK, the the Program I had was destroied.
I 've download it again and the flash works!

I try to do fix it and than I tell you when it works...

THX for the fast support... this is the first Board where I become such a fast replay!!!

Thx

p3x · 11-02-2002, 13:12

*cry*

Now I try it like you say, but after all these things, when I try to switch the Phone on, the Phone makes a dark sound an nothin' more happend.

No displaylight or something only this dark BEEEEEEEPP.

Whats the Problem NOW?

Please Help me!!!

hansis · 11-02-2002, 13:20

Try read read log and send it to me and i create map for you.

p3x · 11-02-2002, 13:40

I have a created MAP, but after i send it to the Phone, my Phone makes this DARK BEEEEEEP an nothin' happens.

WHY?

and when I try to update the Software with WinSwup, the Prog says:

"Cant connect to Mobile with BootstrapLoader on Com1!

hansis · 11-02-2002, 13:53

In winswup skip pree-check push start and push on butten on phone.

p3x · 11-02-2002, 13:57

Yes, I had skip the pree-check but before I can press anything the Programm stops an write:

"Cant connect to Mobile with BootstrapLoader on Com1"

And my Phone only makes this f**** dark BEEEEEP sound!

I think i'm to stupid for this or something is very very complicated!

Sixth`SenSe · 11-02-2002, 13:57

U just winswup to above version (upgrade)! change setting winswup! to com1
and then if winswup the display blink!!! C45_MT50 SW to unlock

GOOD LUCK

p3x · 11-02-2002, 14:05

So, now I make the following things.

flash the Phone with All3/4...exe
Write the map I become on the Phone with Logger...exe
Update the Phonesoftware with WinSwup (now it works to update it)

and what happend... [will be continued in next post]

p3x · 11-02-2002, 14:09

....
Yeeeehhhhhhhaaaaaawwwwwwwwwwww!!!!

NOW IT WORKS!!!!

THX TO ALL SUPPORTERS!!! AND special THX to HANSIS !!!!!

I LOVE YOU ALL *fg*

PS: I'm not to stupid for this *phewww*

11-02-2002, 03:22	#1 (permalink)
p3x Junior Member Join Date: Nov 2002 Posts: 11 Member: 17382 Status: Offline Thanks Meter: 0	C45 - Real DEAD Hello all, I have a real problem with my Siemens C45. @ First it has a SimLock, i try to unlock it but after that, the Display shows only "Wrong Software". After this misstake, I try to fix it with many tools... (.log File, .map File create, than an Flash update, than a Softwareupdate, an so on.) NOW, when i try to switch the Phone on, nothin' happens. No Display Light no reaction. NOTHIN' But the clou is, when I try to change the Imei or try to read the informations out of the phon, this things work. (... connect the cable to the Phone, start the Programm, press the red Button, and it works...) SO I think the Phone iss not really DEAD, but something is really complicated... I would despair of this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6682 real dead	CHAGUA	MT-BOX	2	05-26-2010 09:46
Ubl it is a real dead product	benny Haraba	Ultima Box Light	0	03-23-2010 07:39
A50 Real Dead!!! Urgent Help	maxvonred	x1x to x45/x50	2	06-05-2003 00:49
Please calculate map C45.. my C45 was dead.	gsm2wat	Main Sales Section	0	02-14-2002 11:04
Siemens C45 Total dead	keeper7	x1x to x45/x50	0	12-18-2001 09:32

11-02-2002, 06:27	#2 (permalink)
Drug_Store No Life Poster Join Date: Sep 2002 Location: Portugal Posts: 8,456 Member: 15312 Status: Offline Sonork: 100.1576041 Thanks Meter: 1,097	Flash your phone, and only then read log and create map... Read old post...

11-02-2002, 11:22	#3 (permalink)
Jacekpoland Freak Poster Join Date: Oct 2002 Location: Poland Age: 41 Posts: 157 Member: 16426 Status: Offline Thanks Meter: 0	You have to flash your phone whit for example Siemens_All34_cracked_by_XzZ and than read log from phone whit Siemens IMEI Writer 4.02 or higher and then if you can't creat map post it in log reqest Best regards

11-02-2002, 11:33	#4 (permalink)
uni_gsm_tech Freak Poster Join Date: Jul 2002 Age: 55 Posts: 438 Member: 13853 Status: Offline Thanks Meter: 0	http://www.onurgsm.com/download/c45.zip

11-02-2002, 12:49	#5 (permalink)
p3x Junior Member Join Date: Nov 2002 Posts: 11 Member: 17382 Status: Offline Thanks Meter: 0	Now, when I try to flash the Phone, the Programm "All3/4..." displays at least: Waiting for CalcThread to exit... and nothin' more happend. I wait for about an hour, but nothin' happend. Detail what the Prog says: Flash HC = C489 SoftInfo = Ver. FF Looking for hardware... read_device_info() - OK Calculating security data... Waiting for CalcThread to exit... arghs Please Help...

11-02-2002, 12:54	#6 (permalink)
p3x Junior Member Join Date: Nov 2002 Posts: 11 Member: 17382 Status: Offline Thanks Meter: 0	OK, the the Program I had was destroied. I 've download it again and the flash works! I try to do fix it and than I tell you when it works... THX for the fast support... this is the first Board where I become such a fast replay!!! Thx

11-02-2002, 13:12	#7 (permalink)
p3x Junior Member Join Date: Nov 2002 Posts: 11 Member: 17382 Status: Offline Thanks Meter: 0	cry Now I try it like you say, but after all these things, when I try to switch the Phone on, the Phone makes a dark sound an nothin' more happend. No displaylight or something only this dark BEEEEEEEPP. Whats the Problem NOW? Please Help me!!!

11-02-2002, 13:20	#8 (permalink)
hansis Freak Poster Join Date: Jan 2002 Location: dk Age: 58 Posts: 322 Member: 8317 Status: Offline Thanks Meter: 0	Try read read log and send it to me and i create map for you.

11-02-2002, 13:40	#9 (permalink)
p3x Junior Member Join Date: Nov 2002 Posts: 11 Member: 17382 Status: Offline Thanks Meter: 0	I have a created MAP, but after i send it to the Phone, my Phone makes this DARK BEEEEEEP an nothin' happens. WHY? and when I try to update the Software with WinSwup, the Prog says: "Cant connect to Mobile with BootstrapLoader on Com1!

11-02-2002, 13:53	#10 (permalink)
hansis Freak Poster Join Date: Jan 2002 Location: dk Age: 58 Posts: 322 Member: 8317 Status: Offline Thanks Meter: 0	In winswup skip pree-check push start and push on butten on phone.

11-02-2002, 13:57	#11 (permalink)
p3x Junior Member Join Date: Nov 2002 Posts: 11 Member: 17382 Status: Offline Thanks Meter: 0	Yes, I had skip the pree-check but before I can press anything the Programm stops an write: "Cant connect to Mobile with BootstrapLoader on Com1" And my Phone only makes this f**** dark BEEEEEP sound! I think i'm to stupid for this or something is very very complicated!

11-02-2002, 13:57	#12 (permalink)
Sixth`SenSe Freak Poster Join Date: Jun 2002 Location: sky Posts: 495 Member: 12495 Status: Offline Thanks Meter: 2	U just winswup to above version (upgrade)! change setting winswup! to com1 and then if winswup the display blink!!! C45_MT50 SW to unlock GOOD LUCK

11-02-2002, 14:05	#13 (permalink)
p3x Junior Member Join Date: Nov 2002 Posts: 11 Member: 17382 Status: Offline Thanks Meter: 0	So, now I make the following things. flash the Phone with All3/4...exe Write the map I become on the Phone with Logger...exe Update the Phonesoftware with WinSwup (now it works to update it) and what happend... [will be continued in next post]

11-02-2002, 14:09	#14 (permalink)
p3x Junior Member Join Date: Nov 2002 Posts: 11 Member: 17382 Status: Offline Thanks Meter: 0	.... Yeeeehhhhhhhaaaaaawwwwwwwwwwww!!!! NOW IT WORKS!!!! THX TO ALL SUPPORTERS!!! AND special THX to HANSIS !!!!! I LOVE YOU ALL fg PS: I'm not to stupid for this phewww