Does anybody know to restore completely dead C 25 v 53? Hardware or software solution

[Jurik]

First I've got "Destroyed by C 25 unlocker" on display of my C25 v53. Then I tried the following method:

"I find how to fix C25 destroyed by C25 unluckier.
Use software all25.exe
run it like usually,
enter one Imei
when pro say "Imo xxxxxx-" (were xxxxxxx are firs digit of your Imo)
power on the phone.
On phone screen will appear "SERVICE MODE"... and the pro will finish
with ok screen..
Now close program (but not the phone)...and run again the pro (with
phone connect and in "SERVICE MODE")
now the pro will wait a few seconds, till it will ask you for Imei like
usually... now disconnect the phone and power off it..
Now power on and the phone will work ok..."

And my phone became dead...
Then I tried another method:

"Start the C25 4608.EXE flasher.
Keep Pressing ON button until flasher coneccts to
phone
Wen it erase flash,and start transmitting...
disconect the cable from the phone.
Pull battery out ,and put it back to phone.
Start flasher C25 4303
Start all25.exe ,enter another IMEI
Repear the procedure, and phone should display
Service mode
After that....,repear procedure with flashers and
ALL25
The whole PROCEDURE 100% REPEAR EVERY PHONE"

But the situation didn't change...

[Mabaji20]

All this is not working with ver:53-- the only thing to repair your phone is the flash 53-- bud on this moment yoy cant find him on the net, the one you can find are fakes.

Originally posted by Jurik:
First I've got "Destroyed by C 25 unlocker" on display of my C25 v53. Then I tried the following method:

"I find how to fix C25 destroyed by C25 unluckier.
Use software all25.exe
run it like usually,
enter one Imei
when pro say "Imo xxxxxx-" (were xxxxxxx are firs digit of your Imo)
power on the phone.
On phone screen will appear "SERVICE MODE"... and the pro will finish
with ok screen..
Now close program (but not the phone)...and run again the pro (with
phone connect and in "SERVICE MODE")
now the pro will wait a few seconds, till it will ask you for Imei like
usually... now disconnect the phone and power off it..
Now power on and the phone will work ok..."

And my phone became dead...
Then I tried another method:

"Start the C25 4608.EXE flasher.
Keep Pressing ON button until flasher coneccts to
phone
Wen it erase flash,and start transmitting...
disconect the cable from the phone.
Pull battery out ,and put it back to phone.
Start flasher C25 4303
Start all25.exe ,enter another IMEI
Repear the procedure, and phone should display
Service mode
After that....,repear procedure with flashers and
ALL25
The whole PROCEDURE 100% REPEAR EVERY PHONE"

But the situation didn't change...