Flashfile for c25 v51F

[Dark Knight]

Ich have an c25, which was destroyed by an unlocker. I habe erased the Soft and upgraded it with 4303,4308 but the Phone says
"Wrong Softw" jet. What i can do, to repair it??

Cu
DK

[vala]

Try to flash with 5101 or 5108, maybe it helps.

[Dark Knight]

I Have try it with 5101 and 5108 but the Phones still won't work.

What now??

[Mabaji20]

SIEMENS C25 v46 Unlocking Instructions - 100% Working
-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
================================================== ==============
For this procedure you need :
- Siemens C25_4303 Flasher
- Siemens C25_4608 Flasher
* (optionally) Siemens ALL25.EXE service Software
----------------------------------------------------------------
1. Connect the phone to cables (phone is OFF)
2. Start the C25_4608.exe Flasher
3. Keep Pressing POWER ON button until Flasher connects to phone
4. Flasher will start Erasing Flash Memory
5. When it erase Flash, and start "Transmitting data to phone ..."
Disconnect the cable from the phone.
6. Phone is Dead now, and it's ok. Dont worry.
7. Pull the battery out and put it back to phone
8. Start the C25_4303 Flasher
9. Keep Pressing Power ON button untill it connects to phone
this takes some time .. dont be afraid, everything is OK.
10. If Flasher displays "Could not contact the mobile ... continue ?"
Press YES ....
11. After this, the Flasher wil start flashing ...
12. When It finishes, power ON the phone
13. The phone must start normally.
14. Then Insert ANY SIM Card ... phone is UNLOCKED ))
This Method saves even the phones with "WRONG SOFTW." message.
-------------------------------------------------------------------
If the whole procedure doesnt work (phone still displays "wrong sw."
here's what you need to do :
1. Flash the Phone with C25_4608 Flasher
2. Destroy it with old C25 Unlocker (attached)
3. Start ALL25.EXE , enter Phone's IMEI
4. Before Entering Last IMEI digit, prepare to turn the phone ON
5. Enter last digit, turn ON the phone
6. When it comes to 21st. step, HOLD ALT+X to exit the program
(if you dont exit it's bad
7. Repeat the procedure, and phone should display "Service mode"
8. Repat procedure Until it says "Wrong Softw."
9. After that .... repeat procedure with Flasher's 4608 and 4303

This, Second Procedure must be used in only 2% of cases ....

BUT, The whole PROCEDURE (1+2) 100% Unlocks
and Repairs EVERY PHONE !!!!!!!!!!!!!!!!!!!

Originally posted by Dark Knight:
Ich have an c25, which was destroyed by an unlocker. I habe erased the Soft and upgraded it with 4303,4308 but the Phone says
"Wrong Softw" jet. What i can do, to repair it??

Cu
DK

[kosta]

if this does not work try it again
and when All25 ask for imei write 00000000000000
or 1111111111111111
this must work!

[Dark Knight]

Ich have doit 20 times but the Phones are still dead.

Cu
DK