Siemens S35, how to repair??? - GSM-Forum

Chawek · 02-14-2002, 17:29

Hi! I have Siemens S35 phone, i don't know what SW version it has. Someone's tried to unlock it and something goes wrong, i don't know which program he has used. Now when i press power on for short time it turns on for 1 second and turns off. When I try to flash it with SWUP i have to give a sign to the program that the phone is connected, in this purpose i have to press power on button for short time. When i press it the phone lights on for 1 second and then it turns off and program doesn't see the phone. All other programs i have doesn't see the phone too. What can i do? Did someone's got an idea?

Thanx for Your help.

PS. Sorry for my English.

Best regards. Sin.

Abe · 02-15-2002, 00:33

you tried CEE REPAIR IN ZIEMENS TOOL 1.22? try it....phone off,EG 1.09...read info->cee repair

Chawek · 02-15-2002, 11:30

Hi! I can't CEE_REPAIR when i press phone info program waits for a sign from phone (i must press power on for short time) when i press it phone lights on for 1 second and nothing happens. Program doesn't see the phone!!!

djdunlock · 02-15-2002, 11:50

Try another PC (best system is win98se for this), must work, I made a lot of x35 this way. Attention, dont try it on notebook.

If it doesn't help you, you must obtain right EEPROM and flash it to your phone. Bye.

[ 15 February 2002: Message edited by: djdunlock ]

Chawek · 02-15-2002, 12:11

It doesn't work on other pc's <img src="frown.gif" border="0"> I can't flash it with eeprom or full flash, all programs i have to flash the Siemens phones doesn't see the phone! HELP!!

Best regards.

LPP · 02-15-2002, 14:05

Hei, i have this problem before.. You must release your battery from the phone then put it again. If the phone still can't connect try to release the battery again then press CEE Repair, when the soft searching the phone you must very quickly put on the battery and press On power button.. this should work <img src="biggrin.gif" border="0">

Chawek · 02-15-2002, 14:51

The phone doesn't work like after bad flashing (after bad flashing, when you try to turn on the phone a little mark indicates on the screen and then it turns off). The phone lights on when i press power on button for short time, when i press it for long time to turn on the phone reaction is the same, just after power on button was pressed, phone lights on and after 1 second lights off. An idea with removing battery doesn't works <img src="frown.gif" border="0">

P.S. Sorry for my English

Best regards.

02-14-2002, 17:29	#1 (permalink)
Chawek Insane Poster Join Date: Feb 2002 Location: Poznan - Poland Age: 30 Posts: 75 Member: 9339 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Siemens S35, how to repair??? Hi!<br />I have Siemens S35 phone, i don't know what SW version it has. Someone's tried to unlock it and something goes wrong, i don't know which program he has used. Now when i press power on for short time it turns on for 1 second and turns off. When I try to flash it with SWUP i have to give a sign to the program that the phone is connected, in this purpose i have to press power on button for short time. When i press it the phone lights on for 1 second and then it turns off and program doesn't see the phone. All other programs i have doesn't see the phone too. What can i do? Did someone's got an idea? Thanx for Your help. PS. Sorry for my English. Best regards.<br />Sin.

02-15-2002, 00:33	#2 (permalink)
Abe No Life Poster Join Date: Apr 2001 Location: Croatia Age: 34 Posts: 1,117 Member: 4185 Status: Offline Thanks: 0 Thanked 3 Times in 2 Posts	you tried CEE REPAIR IN ZIEMENS TOOL 1.22?<br />try it....phone off,EG 1.09...read info->cee repair

02-15-2002, 11:30	#3 (permalink)
Chawek Insane Poster Join Date: Feb 2002 Location: Poznan - Poland Age: 30 Posts: 75 Member: 9339 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hi!<br />I can't CEE_REPAIR when i press phone info program waits for a sign from phone (i must press power on for short time) when i press it phone lights on for 1 second and nothing happens. Program doesn't see the phone!!!

02-15-2002, 11:50	#4 (permalink)
djdunlock No Life Poster Join Date: Jul 2001 Location: East Europe Age: 43 Posts: 923 Member: 5452 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Try another PC (best system is win98se for this), must work, I made a lot of x35 this way.<br />Attention, dont try it on notebook. If it doesn't help you, you must obtain right EEPROM and flash it to your phone.<br />Bye. [ 15 February 2002: Message edited by: djdunlock ]</p>

02-15-2002, 12:11	#5 (permalink)
Chawek Insane Poster Join Date: Feb 2002 Location: Poznan - Poland Age: 30 Posts: 75 Member: 9339 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	It doesn't work on other pc's <img src="frown.gif" border="0"> I can't flash it with eeprom or full flash, all programs i have to flash the Siemens phones doesn't see the phone!<br />HELP!! Best regards.

02-15-2002, 14:05	#6 (permalink)
LPP Insane Poster Join Date: Jan 2002 Location: earth Age: 32 Posts: 62 Member: 8906 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hei, i have this problem before..<br />You must release your battery from the phone then put it again. If the phone still can't connect try to release the battery again then press CEE Repair, when the soft searching the phone you must very quickly put on the battery and press On power button.. this should work <img src="biggrin.gif" border="0">

02-15-2002, 14:51	#7 (permalink)
Chawek Insane Poster Join Date: Feb 2002 Location: Poznan - Poland Age: 30 Posts: 75 Member: 9339 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	The phone doesn't work like after bad flashing (after bad flashing, when you try to turn on the phone a little mark indicates on the screen and then it turns off). The phone lights on when i press power on button for short time, when i press it for long time to turn on the phone reaction is the same, just after power on button was pressed, phone lights on and after 1 second lights off. An idea with removing battery doesn't works <img src="frown.gif" border="0"> P.S. Sorry for my English Best regards.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Siemens A57 BAD TESTPOINT HOW TO REPAIR ?	Bokonda	E-Gold Based Phones	11	09-18-2005 20:33
how to repair siemens cf62 bad tp cut	crisrad	S-Gold Based Phones	8	01-08-2005 20:10
How to repair dead S35?	HiTech	x1x to x45/x50	3	01-17-2002 16:03
How To repair siemens c25 after getting ****ed up one	Copyland	x1x to x45/x50	1	05-10-2000 10:00