Siemens x2x Auto Ignition cable - GSM-Forum

GSM Coolhawk · 12-29-2002, 21:39

Hi All

After searching the old threads I was not able to get hold of a schematic of Siemens x2x Auto Ignition cable.

Well now I found it, and for those who have been looking for it go here

They have cable schematics for A LOT of phones

Regards

yanto_swh · 01-27-2003, 02:42

THANKS PALS, UR SCHEMATIC IS NICE AND EASIER To BUILD, HAVE U BUILD THAT, SO TELL ME THE RESULT AND THE ADVANTAGE BY USING AUTO IGNITION CABLE WITH MANUAL CABLE,THANK IN ADVANCE

pedronunes · 09-22-2003, 19:24

Hello, i am looking for an auto ignition cable for my siemens c25. Your link provided below doesn´t work. Can you help me?[

QUOTE]Originally posted by GSM Coolhawk
Hi All

After searching the old threads I was not able to get hold of a schematic of Siemens x2x Auto Ignition cable.

Well now I found it, and for those who have been looking for it go here

They have cable schematics for A LOT of phones

Regards [/QUOTE]

GSM Coolhawk · 09-22-2003, 20:53

@All

Well it seems that a lot of folks still searches for the "old" stuff. Over the next months or so (If my time permits it, I'm quite busy) I'll open up my dedicated Hardware Repair site. Stuffed with g*** ideas and pics. And off course a lot of the older solutions will be uploaded too, they unfortunatly slowly disappear from links here at the forum.

Anyway, for those who needs schematics for C-S25_35_M35_C28 auto ignition cable, you can all grab it here

And for those who wonder what autoignitio is, put simple, you do not push the "on" buttom on the phone. The is i.e. needed when using All25, I have not succeded in getting this program to work with manual ignition.

You can all give your thanks to Andromeda Group, who made this schematic, and posted it free somewhere I dont remember. I just make it accessible again

Regards

djirda · 02-17-2005, 00:39

Very good.I had problems with update tools because of cable.They cant detect and turn on phone.This will solve my problem.

12-29-2002, 21:39	#1 (permalink)
GSM Coolhawk No Life Poster Join Date: Dec 2001 Location: United Arab Emirates, Dubai Age: 52 Posts: 1,269 Member: 7751 Status: Offline Thanks Meter: 74	Siemens x2x Auto Ignition cable Hi All After searching the old threads I was not able to get hold of a schematic of Siemens x2x Auto Ignition cable. Well now I found it, and for those who have been looking for it go here They have cable schematics for A LOT of phones Regards

09-22-2003, 19:24	#3 (permalink)
pedronunes Junior Member Join Date: Sep 2003 Posts: 1 Member: 39682 Status: Offline Thanks Meter: 0	Re: Siemens x2x Auto Ignition cable Hello, i am looking for an auto ignition cable for my siemens c25. Your link provided below doesn´t work. Can you help me?[ QUOTE]Originally posted by GSM Coolhawk Hi All After searching the old threads I was not able to get hold of a schematic of Siemens x2x Auto Ignition cable. Well now I found it, and for those who have been looking for it go here They have cable schematics for A LOT of phones Regards [/QUOTE]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
auto ignition cable!!!	garfild	SST-Dongle	3	03-25-2006 05:47
AUTO IGNITION CABLE for SIEMENS	houseman	S-Gold Based Phones	15	03-21-2006 20:00
Need Pinouts To Make auto Ignition cable	khawar	SWAP	4	10-25-2005 19:21
Wher can I buy a auto-ignition cable	Olsenrye	SST-Dongle	1	08-09-2005 20:24
Auto Ignition Cable Schematic	jamchat	SST-Dongle	5	07-25-2005 08:42

01-27-2003, 02:42	#2 (permalink)
yanto_swh Freak Poster Join Date: Aug 2002 Location: Indonesia Age: 45 Posts: 225 Member: 15040 Status: Offline Sonork: Siemens Thanks Meter: 1	THANKS PALS, UR SCHEMATIC IS NICE AND EASIER To BUILD, HAVE U BUILD THAT, SO TELL ME THE RESULT AND THE ADVANTAGE BY USING AUTO IGNITION CABLE WITH MANUAL CABLE,THANK IN ADVANCE

09-22-2003, 20:53	#4 (permalink)
GSM Coolhawk No Life Poster Join Date: Dec 2001 Location: United Arab Emirates, Dubai Age: 52 Posts: 1,269 Member: 7751 Status: Offline Thanks Meter: 74	@All Well it seems that a lot of folks still searches for the "old" stuff. Over the next months or so (If my time permits it, I'm quite busy) I'll open up my dedicated Hardware Repair site. Stuffed with g*** ideas and pics. And off course a lot of the older solutions will be uploaded too, they unfortunatly slowly disappear from links here at the forum. Anyway, for those who needs schematics for C-S25_35_M35_C28 auto ignition cable, you can all grab it here And for those who wonder what autoignitio is, put simple, you do not push the "on" buttom on the phone. The is i.e. needed when using All25, I have not succeded in getting this program to work with manual ignition. You can all give your thanks to Andromeda Group, who made this schematic, and posted it free somewhere I dont remember. I just make it accessible again Regards

02-17-2005, 00:39	#5 (permalink)
djirda Freak Poster Join Date: Dec 2004 Posts: 310 Member: 95250 Status: Offline Thanks Meter: 2	Very good.I had problems with update tools because of cable.They cant detect and turn on phone.This will solve my problem.