a52 help please help ?? - GSM-Forum

imran_k · 09-13-2004, 13:02

hi all

please assist me in whatever way you can

by providing diagrams and pictures for the problem listed below

i've tried to cut testpoint on a52 v09

but my board setup for resistors is different

freia 10 and freia 15 still say "boot file not accepted"

i tried tsp scratching but it does work

tried winswup a52 v07 flash , it says " software update denied by mobile "

is there a different cable that i should use

is the testpoint cable different from normal cable

i have a c55 cable

thanx all in advance

DMD · 09-13-2004, 14:49

Hi Imran K

Try holding the board with a strong light behind it and then u should be able to see the track through the board then u can see where to cut

regards D.

imran_k · 09-13-2004, 15:23

thanx , will try and post reply

flo_sb · 02-06-2005, 22:34

you must remove the lcd and the keyboad support (you must have only the pcb board), only after that light it !
you will see the tp perfectly !

teccim · 02-12-2005, 14:24

see this thread :
http://forum.gsmhosting.com/vbb/showthread.php?t=186581

see the tp in attachments.
Change extension to zip - so u'll be able to unzip it.

teccim · 02-12-2005, 14:30

sorry too big for upload... let me find smthng smaller ok?

teccim · 02-12-2005, 14:40

here u r:
a good tp pic.

09-13-2004, 13:02	#1 (permalink)
imran_k Registered User Join Date: May 2004 Location: south africa Age: 41 Posts: 822 Member: 66075 Status: Offline Thanks Meter: 2	a52 help please help ?? hi all please assist me in whatever way you can by providing diagrams and pictures for the problem listed below i've tried to cut testpoint on a52 v09 but my board setup for resistors is different freia 10 and freia 15 still say "boot file not accepted" i tried tsp scratching but it does work tried winswup a52 v07 flash , it says " software update denied by mobile " is there a different cable that i should use is the testpoint cable different from normal cable i have a c55 cable thanx all in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
please help........please help	WILUNLOCK	Smart-Clip	2	02-01-2009 00:50
please help........please help	WILUNLOCK	Universalbox	0	11-25-2008 20:13
Please HELP!!!Please HELP!	tbxl200	HTC & PDA WM( With Touchscreen)	2	09-09-2008 02:44
please help please help	majidiomar2002	CAR Electronics	1	04-16-2008 10:19

09-13-2004, 14:49	#2 (permalink)
DMD No Life Poster Join Date: Jun 2002 Location: CTSA Age: 46 Posts: 2,194 Member: 12660 Status: Offline Thanks Meter: 7	Hi Imran K Try holding the board with a strong light behind it and then u should be able to see the track through the board then u can see where to cut regards D.

09-13-2004, 15:23	#3 (permalink)
imran_k Registered User Join Date: May 2004 Location: south africa Age: 41 Posts: 822 Member: 66075 Status: Offline Thanks Meter: 2	thanx , will try and post reply

02-06-2005, 22:34	#4 (permalink)
flo_sb Freak Poster Join Date: Nov 2004 Location: RO, Sb Age: 36 Posts: 348 Member: 91275 Status: Offline Thanks Meter: 2	you must remove the lcd and the keyboad support (you must have only the pcb board), only after that light it ! you will see the tp perfectly !

02-12-2005, 14:24	#5 (permalink)
teccim Insane Poster Join Date: Dec 2004 Age: 46 Posts: 60 Member: 97439 Status: Offline Thanks Meter: 0	see this thread : http://forum.gsmhosting.com/vbb/showthread.php?t=186581 see the tp in attachments. Change extension to zip - so u'll be able to unzip it.

02-12-2005, 14:30	#6 (permalink)
teccim Insane Poster Join Date: Dec 2004 Age: 46 Posts: 60 Member: 97439 Status: Offline Thanks Meter: 0	sorry too big for upload... let me find smthng smaller ok?