a55 testpoint

[tccat1]

hello peeps ive got a55 v9 if i get a none orginal cable do i still have to do a test point on the phone to take the sim lock off many thx

[Icaros]

Originally Posted by tccat1

hello peeps ive got a55 v9 if i get a none orginal cable do i still have to do a test point on the phone to take the sim lock off many thx

No you haven't.But you must use FREIA or equal soft.FREIA is free and I'm using it!

[nacerdz]

http://www.gsm-free.com/ this site content all test point you need , good loock.

WBR
NACER

[risky3301]

Originally Posted by Icaros

No you haven't.But you must use FREIA or equal soft.FREIA is free and I'm using it!

Can you advise where I can get hold of FREIA software. Thanks

[doktortelecom]

Originally Posted by risky3301

Can you advise where I can get hold of FREIA software. Thanks

try this link www.drugstore.gsmhosting.net/Files/Siemens/ and use freia 9 but you'll need to cut test point and here you are testpoint in attachement(the a 52 a 55 siemens phones are the same at test point and hardware).Good luck!
P.S. Take good attention in cutting test point-no more than 0.1 mm deep and no more than 0.5 -0.7 mm length of cut.Enjoy.
doktortelecom

[ednacell]

Originally Posted by tccat1

hello peeps ive got a55 v9 if i get a none orginal cable do i still have to do a test point on the phone to take the sim lock off many thx

Pick-up test point http://people.itu.int/~emartine/Testpoints.htm#2
and Freia V15 software http://people.itu.int/~emartine/ if you need other testpoint and solutions here http://people.itu.int/~emartine/Testpoints.htm

[flechazo]

for A55 u don't need TEST POINT for unlock it only with cable adn Freia

[ednacell]

Originally Posted by flechazo

for A55 u don't need TEST POINT for unlock it only with cable adn Freia

Maybe true for A55 V9 but A55 V10 or greater you do need TP. Of cause use common sense, 1st try to unlock without testpoint. If without testpoint does not work, the next logical step is to find another solution. And Testpoints works. No one is putting a gun to anyone head, but the more infromation one has the faster one gets to the FINAL solution.... I am Tried today so later...

[risky3301]

Originally Posted by doktortelecom

try this link www.drugstore.gsmhosting.net/Files/Siemens/ and use freia 9 but you'll need to cut test point and here you are testpoint in attachement(the a 52 a 55 siemens phones are the same at test point and hardware).Good luck!
P.S. Take good attention in cutting test point-no more than 0.1 mm deep and no more than 0.5 -0.7 mm length of cut.Enjoy.
doktortelecom

Thanks for the link and info