Boot problem with Freia - GSM-Forum

pcanis · 10-14-2006, 11:49

Hello there,

I'm trying to unlock my SX1 phone lock using freia, and with an unoriginal cable.

Freia reads my SX1 but it then says

Quote:

COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone
COMM_LoadBoots : phone is powered on
COMM_Sendboot : bootfile is not accepted ...

why that bootcode error? how to fix it? i have tried with the 3 different types of bootcores but same thing.

Many thanks

Gehstock · 10-14-2006, 15:12

Make Testpoint is needed

aui · 10-14-2006, 15:57

yes, the err show "bootfile is not accepted"

to fix it just ,make tes point .use friea 15 ,is good

pcanis · 10-14-2006, 17:51

Actually this is what im using

, but where is the testpoint there

hacktek · 10-15-2006, 18:35

Quote:

Originally Posted by pcanis

Actually this is what im using

, but where is the testpoint there

The Sx1 testpoint is so old stuff, that we can't remember at all!

Hahahahaha!

Maybe using the SEARCH feature will help you!

And you are in wrong section! Go to E-Gold section!

pcanis · 10-17-2006, 08:51

Okay i have found some picuters, i guess test point means hand working with hardware and it is not something with softwares.

But i don't understand the term CUT how to cut it ? does a blade do that :P? or i have to go to some electronic maintainance shop?

*Sorry about the E-Gold, i just donno if it is E or S lol !! i guess a moderator should move this post.

BB-gsm · 10-17-2006, 14:11

Quote:

Originally Posted by pcanis

Sorry about the E-Gold, i just donno if it is E or S lol !! i guess a moderator should move this post.

It`s E-Gold ... Freia does NOT support S-Gold phones

So I moved it in the right section

Regards,
B

pcanis · 10-17-2006, 14:16

I have removed the test point from the board, but it still gives me the same error

it seems i cut something near the testpoint as i was looking at the old board pic :S what would that cause :S , the phone turns on fine :S

pcanis · 10-18-2006, 13:24

Sorry for the double post but it is critical :S .
It seems like the CUT part is under the procerssor, how can i remove the processor to reach that area?

*The phone turns on, even tho if that thing i have removed from inside !! :S hope it doesn't ruin something else

10-14-2006, 17:51	#4 (permalink)
pcanis Junior Member Join Date: Sep 2006 Posts: 29 Member: 347833 Status: Offline Thanks Meter: 0	Actually this is what im using , but where is the testpoint there Last edited by pcanis; 10-14-2006 at 18:50.

10-17-2006, 14:16	#8 (permalink)
pcanis Junior Member Join Date: Sep 2006 Posts: 29 Member: 347833 Status: Offline Thanks Meter: 0	I have removed the test point from the board, but it still gives me the same error it seems i cut something near the testpoint as i was looking at the old board pic :S what would that cause :S , the phone turns on fine :S Last edited by pcanis; 10-17-2006 at 14:26.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help sagem 453x boot problem with sim	waqarN70	Infinity-Box	4	10-22-2009 16:26
boot problem with 1110i	zemiklo	MT-BOX	4	07-29-2007 03:35
Activation problem with FREIA UFS 3	trencev	UFS2 + UFS3-Tornadoflasher	3	07-19-2005 20:10
problem with freia build 9	dorinheimbach	Siemens-Benq RingTones and WallPapers	7	02-06-2004 19:31
cannot unlock c60 with freia 9 ,test point cuted ,BOOT FILE NOT ACCEPTED.	crossings	E-Gold Based Phones	9	01-19-2004 17:20

10-14-2006, 15:12	#2 (permalink)
Gehstock Freak Poster Join Date: Jul 2005 Age: 46 Posts: 366 Member: 163721 Status: Offline Thanks Meter: 148	Make Testpoint is needed

10-14-2006, 15:57	#3 (permalink)
aui Freak Poster Join Date: Oct 2004 Location: pontianak is good Posts: 110 Member: 87762 Status: Offline Thanks Meter: 30	yes, the err show "bootfile is not accepted" to fix it just ,make tes point .use friea 15 ,is good

10-17-2006, 08:51	#6 (permalink)
pcanis Junior Member Join Date: Sep 2006 Posts: 29 Member: 347833 Status: Offline Thanks Meter: 0	Okay i have found some picuters, i guess test point means hand working with hardware and it is not something with softwares. But i don't understand the term CUT how to cut it ? does a blade do that :P? or i have to go to some electronic maintainance shop? *Sorry about the E-Gold, i just donno if it is E or S lol !! i guess a moderator should move this post.

10-18-2006, 13:24	#9 (permalink)
pcanis Junior Member Join Date: Sep 2006 Posts: 29 Member: 347833 Status: Offline Thanks Meter: 0	Sorry for the double post but it is critical :S . It seems like the CUT part is under the procerssor, how can i remove the processor to reach that area? *The phone turns on, even tho if that thing i have removed from inside !! :S hope it doesn't ruin something else