Help me!!! My MC60 FUBU not works in my phone!!!! - GSM-Forum

asdv · 07-10-2005, 16:45

Ny phone was dead last time because of unsaved original FUBU. With the help from many international friends over internet ,it revived .

This time MC60 is dead again but I can not believe it goes dead because I have already saved the substitutive MC60 FUBU ,eeprom,bootcore, and all these can not revive my phone yet!!!

The state:

1.all the time phone shows black screen when I press the start button

2.when I reloaded map in Freia 15

COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_PreloadBoots : number of phone models is 17
COMM_SendBoot : sending boot 0 for model 10
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 1 for model 10
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 2 for model 10
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 3 for model 10
COMM_SendBoot : waiting for boot ack
COMM_LoadBoots : Checking bootcode..
COMM_LoadBoots : internal loader version is 01.02
COMM_LoadBoots : EEPROM IMEI is 3519520008----
COMM_LoadBoots : original IMEI is 3519520008---- (locked)
COMM_LoadBoots : found SIEMENS MC6C lg8 v7 (1)
COMM_LoadBoots : flash ids are 00012212 [00000000] - 1201
COMM_LoadBoots : phone ids are 8D28ACA2 [8D28ACA2]
TTY_CloseCOMPort : Closing Prodigy
O.K.
(P.S. new EEPROM IMEI as the same number as orginal's3519520008----)

3.When I read(unlock or repair) by sst-gsm in the test-point(new boot) boot mode. it shows blue screen with swing shaken and onnnnnnnn sounds!!!

What I should do to fix it??? Need your help!!!!!!!!!!!

brandiber · 07-11-2005, 19:21

Download SST fubu (16MB) on www.siemens-free**** (you'll need antileech plugin for your browser in order to download)
Then Unlock and Repair and your phone should work.
Don't worry if you have blue- or whitescreen problem afterwards... just an calibration problem which is easy to fix

shurubelul · 07-11-2005, 19:32

try to use this: http://forum.gsmhosting.com/vbb/showthread.php?t=216838

BB-gsm · 07-11-2005, 19:58

No no no, Poeple we are in XXI century ! No need bootcore & eeprom flashing !

Just flash it (using SST) with this ONE flashfile ...

After flashing do "Repair" or "Direct unlock" with FREIA (in this case they are same) ...

P.S. If u get BLUE or WHITE screen, just check button beeps

it works, but needs to set contrast ...

for this we`ve got "x55 contrast tool"

DONE!

Regards,
BeQuA

shurubelul · 07-11-2005, 20:07

Quote:

Originally Posted by BB-gsm

No no no, Poeple we are in XXI century ! No need bootcore & eeprom flashing !

Just flash it (using SST) with this ONE flashfile ...

After flashing do "Repair" or "Direct unlock" with FREIA (in this case they are same) ...

P.S. If u get BLUE or WHITE screen, just check button beeps

it works, but needs to set contrast ...

for this we`ve got "x55 contrast tool"

DONE!

Regards,
BeQuA

trust me, i try this metod, with SST, twice, but with no any luck... so i try the other solution and it work...on 2 MC60... so...

BB-gsm · 07-11-2005, 20:13

Sorry but I can`t trust u...

I`ve got alived 4 dead MC60-s today that way easily ... I trust myself more

P.S. Sure u can use method which u like ... it`s ur choise

shurubelul · 07-11-2005, 20:18

may be the flash file of 14mega for sst was not oki, i dont know...

but i loose all night to revive that phones and only with that trick works... anyway...

devil_online · 07-11-2005, 22:35

I've try that way and it says to turn power on but ot wont respond....'cause the phone is very dead. The version is v10.
Any help apriciated..

asdv · 07-12-2005, 13:02

Quote:

Originally Posted by brandiber

Download SST fubu (16MB) on www.siemens-free**** (you'll need antileech plugin for your browser in order to download)
Then Unlock and Repair and your phone should work.
Don't worry if you have blue- or whitescreen problem afterwards... just an calibration problem which is easy to fix

Thanks for help!!!!

asdv · 07-12-2005, 13:08

Quote:

Originally Posted by shurubelul

try to use this: http://forum.gsmhosting.com/vbb/showthread.php?t=216838

Hello shurubelul,

I just put your file into my phone, and did not do anything else, it starts work perfectly!!!!

I'm very grateful for how powerful your file is and just revives my MC60 phone from death again!!!
You are great man and I thanks you for this great help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

By the way, I should say thanks to all these friends who are here giving me these advices, Thanks you all!!!!!!!!!!!!!!!!!!

asdv · 07-12-2005, 13:15

Quote:

Originally Posted by BB-gsm

No no no, Poeple we are in XXI century ! No need bootcore & eeprom flashing !

Just flash it (using SST) with this ONE flashfile ...

After flashing do "Repair" or "Direct unlock" with FREIA (in this case they are same) ...

P.S. If u get BLUE or WHITE screen, just check button beeps

it works, but needs to set contrast ...

for this we`ve got "x55 contrast tool"

DONE!

Regards,
BeQuA

Thanks for help!!!!!!

07-10-2005, 16:45	#1 (permalink)
asdv Major Poster Join Date: Jun 2005 Age: 53 Posts: 41 Member: 156103 Status: Offline Thanks Meter: 0	Help me!!! My substitutive MC60 FUBU not works in my phone!!!! Ny phone was dead last time because of unsaved original FUBU. With the help from many international friends over internet ,it revived . This time MC60 is dead again but I can not believe it goes dead because I have already saved the substitutive MC60 FUBU ,eeprom,bootcore, and all these can not revive my phone yet!!! The state: 1.all the time phone shows black screen when I press the start button 2.when I reloaded map in Freia 15 COMM_LoadBoots : Waiting to power on the phone ... COMM_LoadBoots : phone is powered on COMM_PreloadBoots : number of phone models is 17 COMM_SendBoot : sending boot 0 for model 10 COMM_SendBoot : waiting for boot ack COMM_SendBoot : sending boot 1 for model 10 COMM_SendBoot : waiting for boot ack COMM_SendBoot : sending boot 2 for model 10 COMM_SendBoot : waiting for boot ack COMM_SendBoot : sending boot 3 for model 10 COMM_SendBoot : waiting for boot ack COMM_LoadBoots : Checking bootcode.. COMM_LoadBoots : internal loader version is 01.02 COMM_LoadBoots : EEPROM IMEI is 3519520008---- COMM_LoadBoots : original IMEI is 3519520008---- (locked) COMM_LoadBoots : found SIEMENS MC6C lg8 v7 (1) COMM_LoadBoots : flash ids are 00012212 [00000000] - 1201 COMM_LoadBoots : phone ids are 8D28ACA2 [8D28ACA2] TTY_CloseCOMPort : Closing Prodigy O.K. (P.S. new EEPROM IMEI as the same number as orginal's3519520008----) 3.When I read(unlock or repair) by sst-gsm in the test-point(new boot) boot mode. it shows blue screen with swing shaken and onnnnnnnn sounds!!! What I should do to fix it??? Need your help!!!!!!!!!!! Last edited by asdv; 07-10-2005 at 17:24.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Why my box is not working on BB5 phones??? PLEASE HELP!!	rx7	Cyclonebox	10	09-21-2009 00:33
HELP ME UB TEAM: My Universal box not work with BB5 phones	Mariofabian	Universalbox	4	08-29-2008 08:38
Problems Cruiser not work in DB2020 Phones	carlos300	Cruiser Suite	2	06-08-2007 08:20
My C5-2 not work in SCR2 V15	yui1	SagMaster Team OLD Products	1	02-24-2006 07:27
MC60 camera not working in menu	Yoda_Brno	E-Gold Based Phones	5	05-17-2005 11:11

07-11-2005, 19:21	#2 (permalink)
brandiber Freak Poster Join Date: Mar 2003 Age: 42 Posts: 170 Member: 25693 Status: Offline Thanks Meter: 1	Download SST fubu (16MB) on www.siemens-free**** (you'll need antileech plugin for your browser in order to download) Then Unlock and Repair and your phone should work. Don't worry if you have blue- or whitescreen problem afterwards... just an calibration problem which is easy to fix

07-11-2005, 19:32	#3 (permalink)
shurubelul No Life Poster Join Date: Mar 2005 Location: Romania Age: 48 Posts: 651 Member: 124026 Status: Offline Thanks Meter: 27	try to use this: http://forum.gsmhosting.com/vbb/showthread.php?t=216838

07-11-2005, 19:58	#4 (permalink)
BB-gsm No Life Poster Join Date: Jul 2004 Location: GEORGIA,Tbilisi Posts: 3,393 Member: 75765 Status: Offline Thanks Meter: 722	No no no, Poeple we are in XXI century ! No need bootcore & eeprom flashing ! Just flash it (using SST) with this ONE flashfile ... After flashing do "Repair" or "Direct unlock" with FREIA (in this case they are same) ... P.S. If u get BLUE or WHITE screen, just check button beeps it works, but needs to set contrast ... for this we`ve got "x55 contrast tool" DONE! Regards, BeQuA

07-11-2005, 20:13	#6 (permalink)
BB-gsm No Life Poster Join Date: Jul 2004 Location: GEORGIA,Tbilisi Posts: 3,393 Member: 75765 Status: Offline Thanks Meter: 722	Sorry but I can`t trust u... I`ve got alived 4 dead MC60-s today that way easily ... I trust myself more P.S. Sure u can use method which u like ... it`s ur choise

07-11-2005, 20:18	#7 (permalink)
shurubelul No Life Poster Join Date: Mar 2005 Location: Romania Age: 48 Posts: 651 Member: 124026 Status: Offline Thanks Meter: 27	may be the flash file of 14mega for sst was not oki, i dont know... but i loose all night to revive that phones and only with that trick works... anyway...

07-11-2005, 22:35	#8 (permalink)
devil_online Junior Member Join Date: Dec 2002 Posts: 37 Member: 18815 Status: Offline Thanks Meter: 0	I've try that way and it says to turn power on but ot wont respond....'cause the phone is very dead. The version is v10. Any help apriciated..