A55 test point - GSM-Forum

X-tremePT · 06-29-2003, 12:24

How can i make the test point on the A55 to use the free unlocker from SPUnlock ?

Thanks

Ivo

milan.gsm · 06-29-2003, 13:13

see the picture of test point which is in zip with spunlock A55 unlocker. You need to scratch at this place until you see metal and disconnect this way... after that test point is activated. But spunlocks A55 unlocker not working for me

( may not all flash ids are supported ... i use ksie map generator for read log a create map with C55 selected and my phone is unlocked succesfully ..
download ksiemap generator here:
http://www.qadra.sk/cenniky_html/dow...sie_2_full.rar

X-tremePT · 06-29-2003, 13:24

thanks

do i nead test point to use the logger as well ?

X-tremePT · 06-29-2003, 13:25

another thing ... i dont have that picture from the test point.

ChelasGsm · 06-29-2003, 13:30

http://www.telemoveis.us/download.php?id=366

plruzza · 06-29-2003, 21:16

Is it need solder cut line again?

bluegatar · 06-30-2003, 01:21

The picture cut that point and unlock no test point needed after solder back point u cut

X-tremePT · 06-30-2003, 10:14

what point ? i dont see anything in the board where the picture shows

darkeye · 07-07-2003, 19:18

do we need to connect gnd with this cutted wire? or is it enough only to cut it?
please help
best regards

jeremias33 · 07-07-2003, 20:48

i did not see this wire showed on spunlock picture - there is nothing to cute on board
the A55 board is equal to C55 but I don't know were is test point

jboy · 07-07-2003, 22:18

read this tread.

http://forum.gsmhosting.com/vbb/show...threadid=89151

jeremias33 · 07-08-2003, 01:55

i jsut read it but the problem is the wire that does not exist on board

darkeye · 07-08-2003, 03:28

problem solved
no need to connect gnd. jeremias33 you cannot see this wire with your eyes use a microscope or lens. it is very small.

jeremias33 · 07-08-2003, 12:07

I have a lens but I can not see this wire....

zdob · 07-08-2003, 17:40

Hi.
Try to use right section for post new messages............

[GLOW=red]moved by zdob.....[/GLOW]

06-29-2003, 12:24	#1 (permalink)
X-tremePT Junior Member Join Date: May 2003 Posts: 33 Member: 29935 Status: Offline Thanks Meter: 0	A55 test point How can i make the test point on the A55 to use the free unlocker from SPUnlock ? Thanks Ivo

06-29-2003, 21:16	#6 (permalink)
plruzza Freak Poster Join Date: Dec 1999 Location: 17 deg 49 min South Posts: 301 Member: 771 Status: Offline Thanks Meter: 9	A55 test point_solder again or not? Is it need solder cut line again?

07-07-2003, 20:48	#10 (permalink)
jeremias33 Junior Member Join Date: Jul 2003 Posts: 9 Member: 33637 Status: Offline Thanks Meter: 0	i did not see this wire showed on spunlock picture - there is nothing to cute on board the A55 board is equal to C55 but I don't know were is test point Last edited by jeremias33; 07-07-2003 at 21:03.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Real A55 Test point to use with Ksie2!! Tested!!!	gsm flying free	E-Gold Based Phones	18	08-26-2003 04:23
need a55 test point ,pls.	fabian	E-Gold Based Phones	44	07-23-2003 21:35
a55 test point	electrohicham	E-Gold Based Phones	1	07-12-2003 09:53
A55 test point explanation plz!!	eddierasta	E-Gold Based Phones	0	07-08-2003 14:48
A55 test point	apple inside	E-Gold Based Phones	0	07-06-2003 20:18

06-29-2003, 13:13	#2 (permalink)
milan.gsm Insane Poster Join Date: Nov 2002 Location: Slovakia Age: 39 Posts: 73 Member: 17622 Status: Offline Thanks Meter: 0	see the picture of test point which is in zip with spunlock A55 unlocker. You need to scratch at this place until you see metal and disconnect this way... after that test point is activated. But spunlocks A55 unlocker not working for me ( may not all flash ids are supported ... i use ksie map generator for read log a create map with C55 selected and my phone is unlocked succesfully .. download ksiemap generator here: http://www.qadra.sk/cenniky_html/dow...sie_2_full.rar

06-29-2003, 13:24	#3 (permalink)
X-tremePT Junior Member Join Date: May 2003 Posts: 33 Member: 29935 Status: Offline Thanks Meter: 0	thanks do i nead test point to use the logger as well ?

06-29-2003, 13:25	#4 (permalink)
X-tremePT Junior Member Join Date: May 2003 Posts: 33 Member: 29935 Status: Offline Thanks Meter: 0	another thing ... i dont have that picture from the test point.

06-29-2003, 13:30	#5 (permalink)
ChelasGsm No Life Poster Join Date: Jun 2002 Location: Portugal.Chelas Age: 39 Posts: 1,316 Member: 12966 Status: Offline Thanks Meter: 133	http://www.telemoveis.us/download.php?id=366

06-30-2003, 01:21	#7 (permalink)
bluegatar Freak Poster Join Date: Nov 2002 Age: 43 Posts: 190 Member: 18147 Status: Offline Thanks Meter: 0	The picture cut that point and unlock no test point needed after solder back point u cut

06-30-2003, 10:14	#8 (permalink)
X-tremePT Junior Member Join Date: May 2003 Posts: 33 Member: 29935 Status: Offline Thanks Meter: 0	what point ? i dont see anything in the board where the picture shows

07-07-2003, 19:18	#9 (permalink)
darkeye No Life Poster Join Date: Feb 2002 Location: germany Age: 49 Posts: 966 Member: 9584 Status: Offline Thanks Meter: 31	do we need to connect gnd with this cutted wire? or is it enough only to cut it? please help best regards

07-07-2003, 22:18	#11 (permalink)
jboy Freak Poster Join Date: May 2002 Location: B&H, Australia Posts: 243 Member: 11715 Status: Offline Thanks Meter: 5	read this tread. http://forum.gsmhosting.com/vbb/show...threadid=89151

07-08-2003, 01:55	#12 (permalink)
jeremias33 Junior Member Join Date: Jul 2003 Posts: 9 Member: 33637 Status: Offline Thanks Meter: 0	i jsut read it but the problem is the wire that does not exist on board

07-08-2003, 03:28	#13 (permalink)
darkeye No Life Poster Join Date: Feb 2002 Location: germany Age: 49 Posts: 966 Member: 9584 Status: Offline Thanks Meter: 31	problem solved no need to connect gnd. jeremias33 you cannot see this wire with your eyes use a microscope or lens. it is very small.

07-08-2003, 12:07	#14 (permalink)
jeremias33 Junior Member Join Date: Jul 2003 Posts: 9 Member: 33637 Status: Offline Thanks Meter: 0	I have a lens but I can not see this wire....

07-08-2003, 17:40	#15 (permalink)
zdob No Life Poster Join Date: Dec 2000 Age: 44 Posts: 1,541 Member: 2911 Status: Offline Thanks Meter: 3	Hi. Try to use right section for post new messages............ [GLOW=red]moved by zdob.....[/GLOW]