M55 Blue screen and Buzz ; earlier unlocked with Java patch - GSM-Forum

silhouette · 11-11-2004, 14:52

I have a M55 v11 which I unlocked with the Java patch. Every thing went well - have unlocked many version 11s before this without problems. I unlocked using Freia_M55_AMD

COMM_LoadBoots : selected phone family is 9
TTY_OpenCOMPort : opening COM1
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_LoadBoots : internal loader version is 01.00
COMM_LoadBoots : EEPROM IMEI is 35237700967295
COMM_LoadBoots : original IMEI is 35237700967295 (not locked)
COMM_LoadBoots : found SIEMENS M55 lg92 v11 (1)
COMM_LoadBoots : flash ids are 0001227E [0001227E] - 1201
COMM_LoadBoots : phone ids are 585723A3 [00000000]
O.K.

But this time the phone refused to start up after unlocking.
In other words, the phone went dead.

I later downloaded a 14 mb flash from unlockeasy and flashed phone. Now when I try to unlock I get the following (freia 10)

COMM_LoadBoots : selected phone family is 10
TTY_OpenCOMPort : opening COM1
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_SendBoot : boot file is not accepted

Now I have a phone with a brief blue screen and buzz and then nothing but darkness

SSTAN · 11-11-2004, 14:55

Cut test point,write full flash and unlock
good luck

silhouette · 11-11-2004, 15:07

Yes, I've yet to cut test point. May do that next. Just bidiing my time and will go for the best option suggested in this thread. Thanks mate

silhouette · 11-11-2004, 17:04

I'm waiting for a clear idea on what to do after the test point. Should I run the full 14 mb flash, 2mb boot file, bootcore file, or eeprom flash ?
Should I use freia 10. What option is to be selected; M55 or M55 boot ?
Would appreciate further help

SSTAN · 11-12-2004, 08:48

Select m55 in Freia,write good full flash and unlock the phone!

Ciubaka · 11-12-2004, 09:34

1. Cut the testpoint
2. select m55
3. write good v11 fullflash (i think you can get one at landy`s page)
4. unlock
5. Done

6. Best Regards

silhouette · 11-12-2004, 13:28

I've never believed in cutting test points and have managed unlocking version 11s via the java patch. But I got the test point cut by a friend who's not an expert either.
The result is the same, and I get the 'boot file not accepted message'.
Still have the brief blue screen, buzz and then nothing.
Do you thing there's been a bad test point cut ?
How do I verify this.....
Anyway, guys thanks for the inputs, thanks very much

Ciubaka · 11-12-2004, 15:32

if you get the message 'boot file not accepted message' means that testpoint is not cuted ok !

Dafageni · 11-22-2004, 03:57

Yes bootfile not accepted means testpoint is not cut yet, but if you get phone not powered up it means bad testpoint cut. I have 12 a52 phones with a bad cut. ?The phones do not power up. This is really annoying. If you can do something without cutting but it takes more time. Do it without cutting.

Dafageni · 11-22-2004, 04:02

I have a m55 that powers up but the screen doen't display. I have already check if it is the display. This is good. I also put a display of a good phone and the same blank screen accurs. If when powered up I press the buttons the phone beeps *** if it's working fine. The problem began when I tried unlocking the phone. with testpoint.
Any sollutions guys

microera · 11-22-2004, 07:42

Try contrast tool on Lany' site (http://eh.student.utwente.nl/~landy/) or search by forum with blue or white screen on Siemens....m55, a60,...

Farid_Bidel · 11-23-2004, 09:22

you must write firmware & eeprom1 on your dead phone and unlock it again
you dont need to cut test point because you unlocked it succesfully before
read both of them from good phone with freia.

100% successful
good luck

silhouette · 11-23-2004, 10:16

By the way, I still have the M55 with the brief blue screen and buzz. Will have the test point cut by someone soon.

silhouette · 11-27-2004, 11:35

Yesterday night I went ahead and made the test point cut again. Thefull 14mb flash went smoothly. I then unlocked the phone. The phone turned on with a white screen which i set right with the seimens contrast tool

Moral of the story : If you give yourself time and read the forums well, all the solutions are around here. I've never been one who's believed in test points

Thanks to all the posters in this thread

omzzm · 11-22-2012, 01:10

Hello,
Thank you for all your effort to sustain this forum. Please don't ignore my message because i could'n find any informations all over the internet for my problem because it's about a very old phone.
It's about a siemens m55 bought in 2003. I was a kid and it marked my childhood, it fascinated me, it was the first phone from Romania to support mms and the second with camera. I perfectly remember that i applied a patch to expand the memory, it removed t9. I don't remember if i applied other patch than this. The phone worked well after the patch a long time and one day i remember that i took it from charging and it couldn't boot. The screen was turning on, a blue screen, and for a fraction of second the welcome screen appeared and then it was turning off with a buzz sound. I put it in a box and forgot about it, that was happening in 2004. A few days ago i found it and tried to turn it on, but same thing happened, screen powered on, a blue screen, i see for a fraction of second the message to insert the sim or welcome animation if i insert a sim, and then turned off with a buzz sound. Can you tell me please what can i do? I have the data cable but i don't have the Software tools. The first thing is that i don't want to completely rewrite fw to not loose the phonebook, pictures and sms from it. I have a lot of contacts, sms , pictures, notes from that time and it would be nice to review them after such a long time. How can i save them if i can't turn it on? Can i repair the firmware just to turn it on and save the dat from it, not complete rewrite? I remember that i was using a Software to read the eeprom without the need to turn on the phone. That happend 9 years ago i don't remember what software i was using to read/write/patch the eeprom and all the forums about this phone are closed.
Thank you very much!

11-11-2004, 14:52	#1 (permalink)
silhouette No Life Poster Join Date: Feb 2004 Posts: 1,635 Member: 52597 Status: Offline Thanks Meter: 275	M55 Blue screen and Buzz ; earlier unlocked with Java patch I have a M55 v11 which I unlocked with the Java patch. Every thing went well - have unlocked many version 11s before this without problems. I unlocked using Freia_M55_AMD COMM_LoadBoots : selected phone family is 9 TTY_OpenCOMPort : opening COM1 COMM_IsBootRunning : bootcode does not seem to be running COMM_LoadBoots : Waiting to power on the phone ... COMM_LoadBoots : phone is powered on COMM_LoadBoots : internal loader version is 01.00 COMM_LoadBoots : EEPROM IMEI is 35237700967295 COMM_LoadBoots : original IMEI is 35237700967295 (not locked) COMM_LoadBoots : found SIEMENS M55 lg92 v11 (1) COMM_LoadBoots : flash ids are 0001227E [0001227E] - 1201 COMM_LoadBoots : phone ids are 585723A3 [00000000] O.K. But this time the phone refused to start up after unlocking. In other words, the phone went dead. I later downloaded a 14 mb flash from unlockeasy and flashed phone. Now when I try to unlock I get the following (freia 10) COMM_LoadBoots : selected phone family is 10 TTY_OpenCOMPort : opening COM1 COMM_IsBootRunning : bootcode does not seem to be running COMM_LoadBoots : Waiting to power on the phone ... COMM_LoadBoots : phone is powered on COMM_SendBoot : boot file is not accepted Now I have a phone with a brief blue screen and buzz and then nothing but darkness

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MC60 Blue screen and buzz	kamiran	E-Gold Based Phones	10	10-27-2012 13:19
C60 with AMD flash type : What is the last version unlockable with java patch ? v23?	csr1200	Siemens-Benq Flash Patching	1	10-15-2004 18:45
What's the the last sw vers.of C60 u have unlocked with java patch ?	csr1200	E-Gold Based Phones	0	10-13-2004 05:26
MC60/C60/M55 unlock with Java and bootcore patch	Falck	x4x, x5x Flashpatching	15	09-28-2004 17:53
M55 blue screen and Bzzzzzzzzzzzz	tgsm	E-Gold Based Phones	9	05-10-2004 11:34

11-11-2004, 14:55	#2 (permalink)
SSTAN Registered User Join Date: Jan 2003 Age: 53 Posts: 266 Member: 19842 Status: Offline Thanks Meter: 26	Cut test point,write full flash and unlock good luck

11-11-2004, 15:07	#3 (permalink)
silhouette No Life Poster Join Date: Feb 2004 Posts: 1,635 Member: 52597 Status: Offline Thanks Meter: 275	Yes, I've yet to cut test point. May do that next. Just bidiing my time and will go for the best option suggested in this thread. Thanks mate

11-11-2004, 17:04	#4 (permalink)
silhouette No Life Poster Join Date: Feb 2004 Posts: 1,635 Member: 52597 Status: Offline Thanks Meter: 275	I'm waiting for a clear idea on what to do after the test point. Should I run the full 14 mb flash, 2mb boot file, bootcore file, or eeprom flash ? Should I use freia 10. What option is to be selected; M55 or M55 boot ? Would appreciate further help

11-12-2004, 08:48	#5 (permalink)
SSTAN Registered User Join Date: Jan 2003 Age: 53 Posts: 266 Member: 19842 Status: Offline Thanks Meter: 26	Select m55 in Freia,write good full flash and unlock the phone!

11-12-2004, 09:34	#6 (permalink)
Ciubaka No Life Poster Join Date: Oct 2003 Posts: 923 Member: 42304 Status: Offline Thanks Meter: 12	1. Cut the testpoint 2. select m55 3. write good v11 fullflash (i think you can get one at landy`s page) 4. unlock 5. Done 6. Best Regards

11-12-2004, 13:28	#7 (permalink)
silhouette No Life Poster Join Date: Feb 2004 Posts: 1,635 Member: 52597 Status: Offline Thanks Meter: 275	I've never believed in cutting test points and have managed unlocking version 11s via the java patch. But I got the test point cut by a friend who's not an expert either. The result is the same, and I get the 'boot file not accepted message'. Still have the brief blue screen, buzz and then nothing. Do you thing there's been a bad test point cut ? How do I verify this..... Anyway, guys thanks for the inputs, thanks very much

11-12-2004, 15:32	#8 (permalink)
Ciubaka No Life Poster Join Date: Oct 2003 Posts: 923 Member: 42304 Status: Offline Thanks Meter: 12	if you get the message 'boot file not accepted message' means that testpoint is not cuted ok !

11-22-2004, 03:57	#9 (permalink)
Dafageni Freak Poster Join Date: May 2004 Location: South America Posts: 175 Member: 64449 Status: Offline Thanks Meter: 2	Yes bootfile not accepted means testpoint is not cut yet, but if you get phone not powered up it means bad testpoint cut. I have 12 a52 phones with a bad cut. ?The phones do not power up. This is really annoying. If you can do something without cutting but it takes more time. Do it without cutting.

11-22-2004, 04:02	#10 (permalink)
Dafageni Freak Poster Join Date: May 2004 Location: South America Posts: 175 Member: 64449 Status: Offline Thanks Meter: 2	I have a m55 that powers up but the screen doen't display. I have already check if it is the display. This is good. I also put a display of a good phone and the same blank screen accurs. If when powered up I press the buttons the phone beeps *** if it's working fine. The problem began when I tried unlocking the phone. with testpoint. Any sollutions guys

11-22-2004, 07:42	#11 (permalink)
microera No Life Poster Join Date: Jun 2001 Location: www.microera.si Posts: 1,535 Member: 4923 Status: Offline Thanks Meter: 74	Try contrast tool on Lany' site (http://eh.student.utwente.nl/~landy/) or search by forum with blue or white screen on Siemens....m55, a60,...

11-23-2004, 09:22	#12 (permalink)
Farid_Bidel Junior Member Join Date: Jun 2004 Location: Iran-Tehran Age: 50 Posts: 3 Member: 69540 Status: Offline Thanks Meter: 0	you must write firmware & eeprom1 on your dead phone and unlock it again you dont need to cut test point because you unlocked it succesfully before read both of them from good phone with freia. 100% successful good luck

11-23-2004, 10:16	#13 (permalink)
silhouette No Life Poster Join Date: Feb 2004 Posts: 1,635 Member: 52597 Status: Offline Thanks Meter: 275	By the way, I still have the M55 with the brief blue screen and buzz. Will have the test point cut by someone soon.

11-27-2004, 11:35	#14 (permalink)
silhouette No Life Poster Join Date: Feb 2004 Posts: 1,635 Member: 52597 Status: Offline Thanks Meter: 275	Yesterday night I went ahead and made the test point cut again. Thefull 14mb flash went smoothly. I then unlocked the phone. The phone turned on with a white screen which i set right with the seimens contrast tool Moral of the story : If you give yourself time and read the forums well, all the solutions are around here. I've never been one who's believed in test points Thanks to all the posters in this thread

11-22-2012, 01:10	#15 (permalink)
omzzm Junior Member Join Date: Nov 2012 Posts: 2 Member: 1842681 Status: Offline Thanks Meter: 0	Hello, Thank you for all your effort to sustain this forum. Please don't ignore my message because i could'n find any informations all over the internet for my problem because it's about a very old phone. It's about a siemens m55 bought in 2003. I was a kid and it marked my childhood, it fascinated me, it was the first phone from Romania to support mms and the second with camera. I perfectly remember that i applied a patch to expand the memory, it removed t9. I don't remember if i applied other patch than this. The phone worked well after the patch a long time and one day i remember that i took it from charging and it couldn't boot. The screen was turning on, a blue screen, and for a fraction of second the welcome screen appeared and then it was turning off with a buzz sound. I put it in a box and forgot about it, that was happening in 2004. A few days ago i found it and tried to turn it on, but same thing happened, screen powered on, a blue screen, i see for a fraction of second the message to insert the sim or welcome animation if i insert a sim, and then turned off with a buzz sound. Can you tell me please what can i do? I have the data cable but i don't have the Software tools. The first thing is that i don't want to completely rewrite fw to not loose the phonebook, pictures and sms from it. I have a lot of contacts, sms , pictures, notes from that time and it would be nice to review them after such a long time. How can i save them if i can't turn it on? Can i repair the firmware just to turn it on and save the dat from it, not complete rewrite? I remember that i was using a Software to read the eeprom without the need to turn on the phone. That happend 9 years ago i don't remember what software i was using to read/write/patch the eeprom and all the forums about this phone are closed. Thank you very much!