still dead sl55 - still no help..? - GSM-Forum

seldomdk · 10-25-2003, 10:26

Hi! I'll try this post again, since i got no answers, and I hope someone can help...

I have a problem with my SL55...

I forgot my phonecode and got the master unlock code from siemens service support.

But since my SL55 had the auto switch-off function enabled, it turned the phone off. Trying to turn it back on, it only gave a silent bzzz.
I then tried to flash it, but failed, and now it's completely dead, It doesn't respond to the "on"-button anymore.

From what I can understand from this forum, I need to access the testpoint, to get it alive again. The only picture i can find is the one in Martech's program, which says "connect A and B." I can only see one point there, and I need better instructions!!

Can anyone tell me how to disassemble the the phone and get to the testpoint..?

And can I re-flash the phone with martech's software (it's been unlocked all the time). And where can I find a flash file...

Hope you guys can help me out, othewise it's DEAD..!!??

Thanks

Seldomdk

gyuszko · 10-25-2003, 13:33

1st: it would be better to know,what sw version was in your
phone
2nd: flash full flash with this sw version to your phone by FREIA
(you does NOT need any testpoint)
3rd: use direct unlock with using original imei and your phone will
be repaired based by your phones OTP data

I hope it will help you.

seldomdk · 10-25-2003, 16:12

For the answer...

1) the SW version is 09. (Dansih). The language is secondary at this point. If I can get it up and running, I guess I'll be able to flash it to the danish version later on....

2) Is it possible to flash the phone in FREIA, when the bootcore is ruined, and I can't get the phone to respond when I press the "on" key to power on the phone, when asked to do so in the FREIA program....?

Thank you so far...

SeldomDK

seldomdk · 10-25-2003, 18:01

IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING....!!!!!

Tried FREIA....

Got my phone back in action.....

Thank you...!!!

SeldomDK

10-25-2003, 10:26	#1 (permalink)
seldomdk Junior Member Join Date: Oct 2003 Location: Denmark Posts: 10 Member: 42180 Status: Offline Thanks: 1 Thanked 0 Times in 0 Posts	still dead sl55 - still no help..? Hi! I'll try this post again, since i got no answers, and I hope someone can help... I have a problem with my SL55... I forgot my phonecode and got the master unlock code from siemens service support. But since my SL55 had the auto switch-off function enabled, it turned the phone off. Trying to turn it back on, it only gave a silent bzzz. I then tried to flash it, but failed, and now it's completely dead, It doesn't respond to the "on"-button anymore. From what I can understand from this forum, I need to access the testpoint, to get it alive again. The only picture i can find is the one in Martech's program, which says "connect A and B." I can only see one point there, and I need better instructions!! Can anyone tell me how to disassemble the the phone and get to the testpoint..? And can I re-flash the phone with martech's software (it's been unlocked all the time). And where can I find a flash file... Hope you guys can help me out, othewise it's DEAD..!!?? Thanks Seldomdk

10-25-2003, 16:12	#3 (permalink)
seldomdk Junior Member Join Date: Oct 2003 Location: Denmark Posts: 10 Member: 42180 Status: Offline Thanks: 1 Thanked 0 Times in 0 Posts	Thanks... For the answer... 1) the SW version is 09. (Dansih). The language is secondary at this point. If I can get it up and running, I guess I'll be able to flash it to the danish version later on.... 2) Is it possible to flash the phone in FREIA, when the bootcore is ruined, and I can't get the phone to respond when I press the "on" key to power on the phone, when asked to do so in the FREIA program....? Thank you so far... SeldomDK

10-25-2003, 18:01	#4 (permalink)
seldomdk Junior Member Join Date: Oct 2003 Location: Denmark Posts: 10 Member: 42180 Status: Offline Thanks: 1 Thanked 0 Times in 0 Posts	IT'S WORKING!! IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING, IT'S WORKING....!!!!! Tried FREIA.... Got my phone back in action..... Thank you...!!! SeldomDK

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
sl55 lcd NO LIGTHS keypad have light help please	mohammed	Siemens Hardware Repair Area	2	02-07-2004 00:31
SL55 with no ringtones or images help!!!	infogsm	E-Gold Based Phones	6	12-04-2003 18:25
Dead BF3 103 KJ155000. Flash new Sw but still dead please help!!	AnToS	BF, BG, TH, BHx Series	7	04-17-2003 07:55
C45 still dead, help me please :-(	Proggy	Phone Unlocking Codes & Maps	2	08-13-2002 00:04

10-25-2003, 13:33	#2 (permalink)
gyuszko Product Supporter Join Date: Dec 2001 Location: in my skin Age: 36 Posts: 1,229 Member: 8086 Status: Offline Thanks: 30 Thanked 180 Times in 64 Posts	1st: it would be better to know,what sw version was in your phone 2nd: flash full flash with this sw version to your phone by FREIA (you does NOT need any testpoint) 3rd: use direct unlock with using original imei and your phone will be repaired based by your phones OTP data I hope it will help you.