A65 v7 keypad not working after tp - GSM-Forum

lezwire · 06-16-2005, 05:00

anybody help me with this??? after i cut the testpoint then unlock, the up, down, left, right key and the clear key is not working. maybe i drilled the tp deeply. anybody have a solution for this??? thanks.......

shurubelul · 06-16-2005, 14:01

Quote:

Originally Posted by lezwire

anybody help me with this??? after i cut the testpoint then unlock, the up, down, left, right key and the clear key is not working. maybe i drilled the tp deeply. anybody have a solution for this??? thanks.......

u cut a little wrong... is very hard to do this test point, u need to scrach a little not cut...wiew post for repair test point MC60

lezwire · 06-17-2005, 05:45

i've already searched previous posts, but no luck. i didn't find any answer to this problem. thanks anyway.

shurubelul · 06-20-2005, 00:36

try this: http://forum.gsmhosting.com/vbb/show...t=mc60+bad+cut
it's very hard but is the only way for this problem i guess

lezwire · 06-21-2005, 03:52

thanks my man!!! i will try this and post results. thanks again!!!

shurubelul · 06-21-2005, 15:38

good luck and be carefull next time

i make this mistake, twice, at begining

thomp4pal · 01-15-2007, 17:53

please anyone help, i got a simens a65 testpiont already cut, but locked. i then unlocked to find out that the left softkey and the for directional keys not working.
please can it be from a bad tespoint

06-16-2005, 05:00	#1 (permalink)
lezwire Freak Poster Join Date: Sep 2004 Posts: 451 Member: 80244 Status: Offline Thanks Meter: 49	A65 v7 keypad not working after tp anybody help me with this??? after i cut the testpoint then unlock, the up, down, left, right key and the clear key is not working. maybe i drilled the tp deeply. anybody have a solution for this??? thanks.......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E65 loudspeaker/ringer not working after TP unlock	donish	J.A.F. Plus	4	03-10-2008 20:34
E65 loudspeaker not working after TP unlock	donish	Nokia Hardware & Hardware Repair	3	03-04-2008 22:20
A65 Navigation Keys Not Working After Flashing	toptech	Siemens Hardware Repair Area	3	02-13-2008 19:39
L6, 5 and 6 keypad not work after tp ???	kimo59	Smart-Clip	8	05-11-2006 01:45
T610 Keypad Not Working After Flash With R6c	yousha	Sony Ericsson	9	03-19-2005 16:51

06-17-2005, 05:45	#3 (permalink)
lezwire Freak Poster Join Date: Sep 2004 Posts: 451 Member: 80244 Status: Offline Thanks Meter: 49	i've already searched previous posts, but no luck. i didn't find any answer to this problem. thanks anyway.

06-20-2005, 00:36	#4 (permalink)
shurubelul No Life Poster Join Date: Mar 2005 Location: Romania Age: 48 Posts: 651 Member: 124026 Status: Offline Thanks Meter: 27	try this: http://forum.gsmhosting.com/vbb/show...t=mc60+bad+cut it's very hard but is the only way for this problem i guess

06-21-2005, 03:52	#5 (permalink)
lezwire Freak Poster Join Date: Sep 2004 Posts: 451 Member: 80244 Status: Offline Thanks Meter: 49	thanks my man!!! i will try this and post results. thanks again!!!

06-21-2005, 15:38	#6 (permalink)
shurubelul No Life Poster Join Date: Mar 2005 Location: Romania Age: 48 Posts: 651 Member: 124026 Status: Offline Thanks Meter: 27	good luck and be carefull next time i make this mistake, twice, at begining

01-15-2007, 17:53	#7 (permalink)
thomp4pal No Life Poster Join Date: Jun 2006 Location: Neo-SANA Posts: 604 Member: 292106 Status: Offline Sonork: 100.1582885 Thanks Meter: 116	please anyone help, i got a simens a65 testpiont already cut, but locked. i then unlocked to find out that the left softkey and the for directional keys not working. please can it be from a bad tespoint