unlock & repair a62 - GSM-Forum

tiq · 03-31-2005, 14:49

For unlocking:
Open phone and cute TP how MC60.
Use Freia15, select C60(a60) and "direct unlock" for unlocking.

You phone may killed (flash type 0c01).
For repair:

Use Freia15 ,select a60 and upload a60 eeprom (start adress 7C0000).
after that "direct unlock" and my phone alive.

sergo_zmeia · 04-06-2005, 13:01

Any one can confirm this?
I havent seen a62 with my own yeys...but it will be usefull to have working method...
Thanks and regards!
sergo_zmeia

sergo_zmeia · 04-06-2005, 15:26

Here solution:
http://************.com/forum/showth...0528#post40528
tested 100% works..
Thanks and regards!
sergo_zmeia

senkron24 · 04-06-2005, 16:05

c60 is same with c62 ?
wahts ,s thad
please tel me more !

ImpactPL · 04-06-2005, 16:13

Siemens A62, not C62

dzunlocker · 04-06-2005, 16:22

C60 and C62 are not same
for flash and unlock different cables and softs are used
for C60 use X5X cable with freia or SST (testpoint required) for flshing
use Winswup, vklay.....
for C62 cable with external power and pinout different from X5X cable
u can use C62 logger and log dcrypter for unlock (not all version) and flash programmmer 2.83 for flash
i tested 100% these softs for many phones for unlock, repairing soft bugs
reviving dead phones.
If you have problems contact me with PM
Best regards

Chris02 · 04-06-2005, 17:49

Of course are C60 adn C62 not the same...

C62 has Sony Ericsson base!

PolyRing · 04-06-2005, 20:07

How about flashing A62 ?
Anyone has WinSwup or Flash files for A62 ?

debeliamark · 04-07-2005, 04:50

@ sergo

m.o.b.i.l.e.-f.i.l.e.s.c.o.m is a durty word in gsmsity and your post is automaticaly moderated

jeolog · 05-11-2005, 20:52

iam tested work %100 you can use sst 531 like mc 60 test point like a65 unlock flash

OKOKO · 05-14-2005, 13:31

Quote:

Originally Posted by dzunlocker

C60 and C62 are not same
for flash and unlock different cables and softs are used
for C60 use X5X cable with freia or SST (testpoint required) for flshing
use Winswup, vklay.....
for C62 cable with external power and pinout different from X5X cable
u can use C62 logger and log dcrypter for unlock (not all version) and flash programmmer 2.83 for flash
i tested 100% these softs for many phones for unlock, repairing soft bugs
reviving dead phones.
If you have problems contact me with PM
Best regards

well i guess i found on the forum that an external power must be attached to pin 9 and the unlock wth logger and logger dcrypter
well here is how i did i just need someone the comfirm its correctness for me pls.
well i am using a regular c55 com cable. on opening the cable could see pin 1 idle with pin2-4 connected to the cable. from pin 1(idle pin) i counted to pin9 and atteced a power cable with a crockodile clip at the end, while leaving the other 3 pins remaining.
reassemble the cable and tested. connected the cable to a dc power source and placed cable on my tongue with 5 volts and i felt the voltage as i placed my finger on the negative terminal of the D.C source.

i was informed that i am now to supply 12 volts to the cable via the atteched power cable b4 i can use it for logger.

pls someone confirm or correct this so i can unlock these phones
regards

siewa26 · 05-19-2005, 23:00

Hi I tested it with A62 ... first I flashed it with software No.06 lg.03, then cut as C60 (the line is nice visible under the spotlight), then I used Freia and C60 Direct unlock, my phone flash type was 0c01 but after unlock worked o.k. so I didn't have to write eeprom

pali · 05-26-2005, 12:22

NEED URGENTLY FULLFLASH for A62.
can any1 help me please ?

Pali

Chris02 · 08-28-2005, 17:57

Quote:

Originally Posted by pali

NEED URGENTLY FULLFLASH for A62.
can any1 help me please ?

Pali

Cehck BB-GSm Server
http://www.evil-hackers.com/BB-gsm/

Siemens man · 09-01-2005, 16:22

@chris02
hi man. flash is protected. please tell me unzip pass.
thank you

04-06-2005, 13:01	#2 (permalink)
sergo_zmeia Freak Poster Join Date: Jun 2003 Location: Bulgaria Age: 48 Posts: 471 Member: 32284 Status: Offline Thanks Meter: 4	Hi! Any one can confirm this? I havent seen a62 with my own yeys...but it will be usefull to have working method... Thanks and regards! sergo_zmeia

04-06-2005, 15:26	#3 (permalink)
sergo_zmeia Freak Poster Join Date: Jun 2003 Location: Bulgaria Age: 48 Posts: 471 Member: 32284 Status: Offline Thanks Meter: 4	Hi! Here solution: http://************.com/forum/showth...0528#post40528 tested 100% works.. Thanks and regards! sergo_zmeia

04-07-2005, 04:50	#9 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	@ sergo m.o.b.i.l.e.-f.i.l.e.s.c.o.m is a durty word in gsmsity and your post is automaticaly moderated Last edited by debeliamark; 04-07-2005 at 05:52.

05-19-2005, 23:00	#12 (permalink)
siewa26 Freak Poster Join Date: Dec 2002 Age: 50 Posts: 135 Member: 19126 Status: Offline Thanks Meter: 35	It works :) Hi I tested it with A62 ... first I flashed it with software No.06 lg.03, then cut as C60 (the line is nice visible under the spotlight), then I used Freia and C60 Direct unlock, my phone flash type was 0c01 but after unlock worked o.k. so I didn't have to write eeprom

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
All AMSUNG unlock & repair clip	Vincent Vega	Main Sales Section	0	07-20-2002 21:08
Samsung Unlocking & Repairing Clip new offer	Transway	Main Sales Section	1	07-16-2002 04:21
Need buy Siemens all unlock & repair	zakau	Wanted Products	3	06-06-2002 19:01
REMOTE UNLOCKING & REPAIRING SERVICE	Xak	Main Sales Section	0	02-11-2002 14:34
Unlocking & Repair Guide	guruguide	GSM Mobile Links	1	12-13-2001 15:23

04-06-2005, 16:05	#4 (permalink)
senkron24 No Life Poster Join Date: Sep 2002 Location: Türkiye Age: 48 Posts: 1,939 Member: 15880 Status: Offline Sonork: 100.1612155 Thanks Meter: 452	c60 is same with c62 ? wahts ,s thad please tel me more !

04-06-2005, 16:13	#5 (permalink)
ImpactPL Freak Poster Join Date: Feb 2003 Location: In the state of mind Age: 50 Posts: 248 Member: 21511 Status: Offline Thanks Meter: 2	Siemens A62, not C62

04-06-2005, 16:22	#6 (permalink)
dzunlocker No Life Poster Join Date: Aug 2004 Location: With old & new friends Age: 49 Posts: 692 Member: 79640 Status: Offline Sonork: 1577251 Thanks Meter: 238	C60 and C62 are not same for flash and unlock different cables and softs are used for C60 use X5X cable with freia or SST (testpoint required) for flshing use Winswup, vklay..... for C62 cable with external power and pinout different from X5X cable u can use C62 logger and log dcrypter for unlock (not all version) and flash programmmer 2.83 for flash i tested 100% these softs for many phones for unlock, repairing soft bugs reviving dead phones. If you have problems contact me with PM Best regards

04-06-2005, 17:49	#7 (permalink)
Chris02 No Life Poster Join Date: Oct 2003 Location: Germany Age: 37 Posts: 5,196 Member: 41076 Status: Offline Thanks Meter: 53	Of course are C60 adn C62 not the same... C62 has Sony Ericsson base!

04-06-2005, 20:07	#8 (permalink)
PolyRing Insane Poster Join Date: Jul 2003 Posts: 88 Member: 34054 Status: Offline Thanks Meter: 0	How about flashing A62 ? Anyone has WinSwup or Flash files for A62 ?

05-11-2005, 20:52	#10 (permalink)
jeolog Junior Member Join Date: Jan 2005 Age: 45 Posts: 2 Member: 111599 Status: Offline Thanks Meter: 0	iam tested work %100 you can use sst 531 like mc 60 test point like a65 unlock flash

05-26-2005, 12:22	#13 (permalink)
pali No Life Poster Join Date: Nov 2001 Location: Slovakia Posts: 1,005 Member: 7586 Status: Offline Thanks Meter: 11	NEED URGENTLY FULLFLASH for A62. can any1 help me please ? Pali

09-01-2005, 16:22	#15 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 46 Posts: 5,798 Member: 3925 Status: Offline Thanks Meter: 22	@chris02 hi man. flash is protected. please tell me unzip pass. thank you