C6v Vers 15, service mde yes but no unlock even with zenner diode..please help

[codec_romania]

i have a c6v vers 15 which did not enter in service mode neither with SST532 nor with debil x65

i soldered two zener diode 3,3V to RX TX and GND and now phone enters service mode but nothing else with SST

also with dima debil says penetrating dima failed and doesn t read anything

any ideea?

thanks mihai

[sorinm]

try the 'slow' way - if you can put phone in testmode with eeprom tools (try also with phone powered on)

get ID
enable eeprom
make map
write map
phone unlocked

br
sorinm

[Bohosh]

Originally Posted by codec_romania

i have a c6v vers 15 which did not enter in service mode neither with SST532 nor with debil x65

i soldered two zener diode 3,3V to RX TX and GND and now phone enters service mode but nothing else with SST

also with dima debil says penetrating dima failed and doesn t read anything

any ideea?

thanks mihai

turn off the phone and then just do little ignition.BUT DON'T DISCONNECT THE CABLE FROM PHONE!!!!!!

[jichka]

Originally Posted by Bohosh

turn off the phone and then just do little ignition.BUT DON'T DISCONNECT THE CABLE FROM PHONE!!!!!!

THIS WORK 1000% I TEST MY SELF