GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   S-Gold Based Phones (http://forum.gsmhosting.com/vbb/f340/)
-   -   CT65 dead! (http://forum.gsmhosting.com/vbb/f340/ct65-dead-228639/)

mashmax 08-23-2005 14:24

CT65 dead!
 
Ive tried to unlock CT65(C65 v16) with EEPROM Tool v3.15,all was runnig OK till last step, I clicked "save selected" and recieved this message:

-Error ?15(WBlockInfoQuery) while writing block? 5008...5009...5077-

i cant save these fields(5008,5009,5077) to phone. Now phone doesnt turn on(only beep) but goes delayed 8 sec. in Service Mode.

I tried V-klay to rewrite saved EEprom but without success (time out-power on message again!).

with papuas Soft I got this message:

-Booting in Service Mode Ok
Wait to power on phone ...
دَهيه يًىِ:
Model: SIEMENS C65 16 lg4
Telephone in "Service Mode"
IMEI: 354764001652224
SecurityStatus: CustomerMode
HWid: 327
Battery voltage 65534 mV.
آيىيه: Failure battery settings !



--Auto OpenAll:

Reading data from phone.....
ESN: 77DE35B3
HASH: 84F8B25A659B56D543EEE2F32FC7442B
Keys for this phone allready calcul!
Use old values.......
SKEY: 27345541
Enter key....
SKey enter !
Wrong key !
PhoneOff...

I tried also solution with testpoint, after connect TP(via R) to Gnd,Phone turns off!!



-Need Help from experts please!


Thanks in advance

mashmax 08-26-2005 19:22

How to repair dead C65!
 
-Make a SW-update.

-Write x65 full-EEprom with EPROM Tool(3.15) and click on "ignore" when this error message appears:

""Error ?15(WBlockInfoQuery) while writing block? 5008...5009...5077"", till Program finish writing.

1-Run EEPROM Tool.
2-Load full EEprom of x65(file extension *.eep).
3-Click on "Select all" (left).
4-Move selcted to Phone area(left to right arrow).
5-Click on "Select all" (right).
6-Click on "save Selected" (left) and ignore all errors.
--------------------------------------------------------------------

-Run Papua Utiliy

1-Choose "Replace 76,5008,..." on "FLASH"-Bar and click "DO JOB" and wait till program finishes.
2-Power on, phone should now be working,....

thanks to Skylord, Angele & Zycho and all who supports.


*-phone turned off when connect TP due to incorrect Battery voltage(>3,5Volts)!


All times are GMT +1. The time now is 20:12.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.10444 seconds with 5 queries

SEO by vBSEO