E-point for profile
 

Do You know e-points for profile? I think about Profile 1 and Normal Environ.?
I would like to have e-point for profile swapping... :)
I found this: DAA44A98 - if we use it in another function of appointment it swaps profile to quiet environ... but other profiles? Can somebody help me?

Hello GoLL@B:)
;This patch by RizaPN ,but I don't see in the "SLIKv56: Flash patches."
;I Modification this from sl45_v5508^_^

vkp for v56
0x40C9A0: FFFFFFFFFFFFFFFF E014F0C4DAA46698
0x40C9A8: FFFFFFFFFFFFFFFF 2D02E00C0D03F04C
0x40C9B0: FFFFFFFFFFFFFFFF 5C8C00C4D7400D00
0x40C9B8: FFFFFFFFFFFFFFFF F6FC8824DAA44A98
0x40C9C0: FFFF DB00

;You can use "DAE0A0C9" in some shortcut,Realization Between both "Norm.Environ."& your setup As follows
;Also "Another_Function_of_Appointment" use it
;Goodlucky friend


;0x40C9A1:14 ?4
;14-Quiet Environ.
;24-Noisy Environ.
;34-Profile 1.
;44-Profile 2.
;54-Profile 3

Ok, thanks, I`ll try it ;) Thanks my friend. :)


EDIT: It has worked great so far. Thanks one more time ;) It`s more practical than APS because we can readress it and later use other epoint. :)

With "Another_Function_of_Appointment", you can make use of the above patch this way:
Norm.Environ<=>your setup: DAE0A0C9
Norm.Environ<=>Quiet.Environ: E014DAE0A2C9
Norm.Environ<=>Noisy.Environ: E024DAE0A2C9

ps. I try readress patch from greenteas and I used 2 epoints for change 2 profiles, When I did it, I have always Normal Environ. -> so it`s no practical...

@Xinshou And how can I back: f.e your setup --> normal environ, quiet environ. --> normal environ?

Xinshou: please help translate :)

Its very easy, without any "addon-patch" !!!

Here are the values for each profile for use with AFA:

;E6FC0000D7400D00F6FC8824DAA44A98 : Select Profile #0 (Normal)
;E6FC0101D7400D00F6FC8824DAA44A98 : Select Profile #1 (Quiet)
;E6FC0202D7400D00F6FC8824DAA44A98 : Select Profile #2
;E6FC0303D7400D00F6FC8824DAA44A98 : Select Profile #3,
;E6FC0404D7400D00F6FC8824DAA44A98 : Select Profile #4,
;E6FC0505D7400D00F6FC8824DAA44A98 : Select Profile #5.

It works but only one time. I tried:

At 18:50 I wrote: spspE6FC0303D7400D00F6FC8824DAA44A98
(sp-space) to 18:51

I did next entry and I wrote: spspE6FC0101D7400D00F6FC8824DAA44A98
from 18:55 to 18:56.

and one more entry at 19:00 to 19:01 spspE6FC0000D7400D00F6FC8824DAA44A98.

AFA sets profile 3 - from first entry only... next 2 entries were passed over.

Why? What must I do to have all swapping?

Annother method is to apply the swapping-code patch from riza (2 profiles) or the modified one from rc-flitzer (3 profiles)

you are able to swap through the profiles by normal entrypoints, that means you can use this for AFA, FAV and annother things. Problem is... I don't know the data anymore. So please write rc-flitzer an small PM and he will surly write back to help you :)

__________________

Edit: I revealed the posting :)

---> Click here

So you don't have to write rc-flitzer (even he's a honest man :))

I'm also 100% sure he can help you in swapping all profiles

Its strange in my opinion...
All combinations work but only if I use one of them... If I try to use more than one , only first works correctly...

GoLL@B:
The problem is with your version of AFA, i.e. it can only execute one apoinment and set invalid other apointments.

Here are the AFA patch modified by Coollang for v5508, which has solved above problem. (Pls try to port it to v56.)

0x38050C: E6F8A000 FABF4010
0x1F1040: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF DC49D418860046F120202D1747F22000
0x1F1050: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 8D04E6F8A000FAD81005DC49D4488800
0x1F1060: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 46F420003DF6DC49D4488A0046F42000
0x1F1070: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 3DF0E02CE6FE8C000D03E01CE6FE8800
0x1F1080: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 00E8E6FF0038DC49A92EBD0ABB125C41
0x1F1090: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF F132BB0F7123D7403700B92F08F10DF3
0x1F10A0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF E6F1DB00D7403700B81FDA0D00F8FAD8
0x1F10B0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 7204DC49A92E00EC27F2300047F20A00
0x1F10C0: FFFFFFFFFFFFFFFFFFFF 8D0367F2DF002927CB00

However it seems v5508 has one disadvantage, it cannot write so many codes in an Appointment entry as you do as below:
"....entry and I wrote: spspE6FC0101D7400D00F6FC8824DAA44A98
from 18:55 to 18:56."

Ok, but I can`t do it :(. I don`t know ASM ... :(

This is not problem. I can apply: E6FC0101D7400D00F6FC8824DAA44A98 in adress f.e 40CAA0 and use e-point - DAE0A0CA. :)

That the idea :)
Gollab is my hero :) Now we can create FAV Menü for direct selection of profiles....

@Gollab
Please post your idea in sticky posting... It seems to be very usefull for further purposes

I don`t think like You. Look at this--> But maybe somebody explains me how to do it? I can modify patches from v5508...

Ok I`ll write it in SLIKv56: Flash Patching (3rd part) ...

I slightly changed your patch by adding ret command after each line... Patch you posted in SLIKv56: Flash Patching (3rd part)... jumped through all profiles. I wondered becuase the last profile was always selected (also wondered why phone doesn't switch off)

With "please post your idea in sticky" I ment in the Patches Sticky :)
It's a patch developed by you, even if trustkill gave you command structure but it was your idea to use this data as patch in phoneflash so feel free and share with other users because in the thread you've released this patch it will quickly get lost :(

___________

Version to work with FAV and all other Patches which can call (AFA, GFX, hotkeys)

0x40CBA0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0000D7400D00F6FC8824DAA44A98db00 ; normal
0x40CBB3: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0101D7400D00F6FC8824DAA44A98db00 ; quite
0x40CBC6: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0202D7400D00F6FC8824DAA44A98db00 ; loud
0x40CBD9: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0303D7400D00F6FC8824DAA44A98db00 ; 1
0x40CBEc: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0404D7400D00F6FC8824DAA44A98db00 ; 2
0x40CBFf: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0505D7400D00F6FC8824DAA44A98db00 ; 3

;And use e-points: f.e DAE0A0CB for swap to normal profile.

__________________________________________________ _

Edit:

Haha!!

Try again with version I've posted
As I tried patch without ret command every call to different profile was set to profile 3. Clear because the patch cycled through and the last profile was profile #3 :)

@Goll@b
attention fo use with afa: please edit daxxxxx command you see position has always slightly changed