E-point for profile - GSM-Forum

GoLL@B · 12-07-2005, 22:59

Do You know e-points for profile? I think about Profile 1 and Normal Environ.?
I would like to have e-point for profile swapping...

I found this: DAA44A98 - if we use it in another function of appointment it swaps profile to quiet environ... but other profiles? Can somebody help me?

greenteas · 12-08-2005, 13:04

Hello GoLL@B

;This patch by RizaPN ,but I don't see in the "SLIKv56: Flash patches."
;I Modification this from sl45_v5508^_^

vkp for v56
0x40C9A0: FFFFFFFFFFFFFFFF E014F0C4DAA46698
0x40C9A8: FFFFFFFFFFFFFFFF 2D02E00C0D03F04C
0x40C9B0: FFFFFFFFFFFFFFFF 5C8C00C4D7400D00
0x40C9B8: FFFFFFFFFFFFFFFF F6FC8824DAA44A98
0x40C9C0: FFFF DB00

;You can use "DAE0A0C9" in some shortcut,Realization Between both "Norm.Environ."& your setup As follows
;Also "Another_Function_of_Appointment" use it
;Goodlucky friend

;0x40C9A1:14 ?4
;14-Quiet Environ.
;24-Noisy Environ.
;34-Profile 1.
;44-Profile 2.
;54-Profile 3

GoLL@B · 12-08-2005, 16:45

Ok, thanks, I`ll try it

Thanks my friend.

EDIT: It has worked great so far. Thanks one more time

It`s more practical than APS because we can readress it and later use other epoint.

Xinshou · 12-10-2005, 08:24

With "Another_Function_of_Appointment", you can make use of the above patch this way:
Norm.Environ<=>your setup: DAE0A0C9
Norm.Environ<=>Quiet.Environ: E014DAE0A2C9
Norm.Environ<=>Noisy.Environ: E024DAE0A2C9

GoLL@B · 12-10-2005, 11:05

ps. I try readress patch from greenteas and I used 2 epoints for change 2 profiles, When I did it, I have always Normal Environ. -> so it`s no practical...

@Xinshou And how can I back: f.e your setup --> normal environ, quiet environ. --> normal environ?

greenteas · 12-10-2005, 16:19

Xinshou: please help translate

trustkill · 12-10-2005, 23:18

Its very easy, without any "addon-patch" !!!

Here are the values for each profile for use with AFA:

;E6FC0000D7400D00F6FC8824DAA44A98 : Select Profile #0 (Normal)
;E6FC0101D7400D00F6FC8824DAA44A98 : Select Profile #1 (Quiet)
;E6FC0202D7400D00F6FC8824DAA44A98 : Select Profile #2
;E6FC0303D7400D00F6FC8824DAA44A98 : Select Profile #3,
;E6FC0404D7400D00F6FC8824DAA44A98 : Select Profile #4,
;E6FC0505D7400D00F6FC8824DAA44A98 : Select Profile #5.

GoLL@B · 12-11-2005, 19:04

It works but only one time. I tried:

At 18:50 I wrote: spspE6FC0303D7400D00F6FC8824DAA44A98
(sp-space) to 18:51

I did next entry and I wrote: spspE6FC0101D7400D00F6FC8824DAA44A98
from 18:55 to 18:56.

and one more entry at 19:00 to 19:01 spspE6FC0000D7400D00F6FC8824DAA44A98.

AFA sets profile 3 - from first entry only... next 2 entries were passed over.

Why? What must I do to have all swapping?

cyperghost · 12-11-2005, 19:18

Annother method is to apply the swapping-code patch from riza (2 profiles) or the modified one from rc-flitzer (3 profiles)

you are able to swap through the profiles by normal entrypoints, that means you can use this for AFA, FAV and annother things. Problem is... I don't know the data anymore. So please write rc-flitzer an small PM and he will surly write back to help you

__________________

Edit: I revealed the posting

---> Click here

So you don't have to write rc-flitzer (even he's a honest man

)

I'm also 100% sure he can help you in swapping all profiles

GoLL@B · 12-11-2005, 23:02

Its strange in my opinion...
All combinations work but only if I use one of them... If I try to use more than one , only first works correctly...

Xinshou · 12-12-2005, 01:33

GoLL@B:
The problem is with your version of AFA, i.e. it can only execute one apoinment and set invalid other apointments.

Here are the AFA patch modified by Coollang for v5508, which has solved above problem. (Pls try to port it to v56.)

0x38050C: E6F8A000 FABF4010
0x1F1040: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF DC49D418860046F120202D1747F22000
0x1F1050: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 8D04E6F8A000FAD81005DC49D4488800
0x1F1060: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 46F420003DF6DC49D4488A0046F42000
0x1F1070: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 3DF0E02CE6FE8C000D03E01CE6FE8800
0x1F1080: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 00E8E6FF0038DC49A92EBD0ABB125C41
0x1F1090: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF F132BB0F7123D7403700B92F08F10DF3
0x1F10A0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF E6F1DB00D7403700B81FDA0D00F8FAD8
0x1F10B0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 7204DC49A92E00EC27F2300047F20A00
0x1F10C0: FFFFFFFFFFFFFFFFFFFF 8D0367F2DF002927CB00

However it seems v5508 has one disadvantage, it cannot write so many codes in an Appointment entry as you do as below:
"....entry and I wrote: spspE6FC0101D7400D00F6FC8824DAA44A98
from 18:55 to 18:56."

GoLL@B · 12-12-2005, 14:18

Ok, but I can`t do it

. I don`t know ASM ...

Quote:

However it seems v5508 has one disadvantage, it cannot write so many codes in an Appointment entry as you do as below:

This is not problem. I can apply: E6FC0101D7400D00F6FC8824DAA44A98 in adress f.e 40CAA0 and use e-point - DAE0A0CA.

cyperghost · 12-12-2005, 14:29

That the idea

Gollab is my hero

Now we can create FAV Menü for direct selection of profiles....

@Gollab
Please post your idea in sticky posting... It seems to be very usefull for further purposes

GoLL@B · 12-12-2005, 14:41

Quote:

Originally Posted by cyperghost

That the idea

Gollab is my hero

Now we can create FAV Menü for direct selection of profiles....

I don`t think like You. Look at this-->

Quote:

Originally Posted by GoLL@B

Ok, but I can`t do it . I don`t know ASM ...

But maybe somebody explains me how to do it? I can modify patches from v5508...

Quote:

Originally Posted by cyperghost

@Gollab
Please post your idea in sticky posting... It seems to be very usefull for further purposes

Ok I`ll write it in SLIKv56: Flash Patching (3rd part) ...

cyperghost · 12-12-2005, 16:34

I slightly changed your patch by adding ret command after each line... Patch you posted in SLIKv56: Flash Patching (3rd part)... jumped through all profiles. I wondered becuase the last profile was always selected (also wondered why phone doesn't switch off)

With "please post your idea in sticky" I ment in the Patches Sticky

It's a patch developed by you, even if trustkill gave you command structure but it was your idea to use this data as patch in phoneflash so feel free and share with other users because in the thread you've released this patch it will quickly get lost

___________

Version to work with FAV and all other Patches which can call (AFA, GFX, hotkeys)

0x40CBA0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0000D7400D00F6FC8824DAA44A98db00 ; normal
0x40CBB3: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0101D7400D00F6FC8824DAA44A98db00 ; quite
0x40CBC6: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0202D7400D00F6FC8824DAA44A98db00 ; loud
0x40CBD9: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0303D7400D00F6FC8824DAA44A98db00 ; 1
0x40CBEc: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0404D7400D00F6FC8824DAA44A98db00 ; 2
0x40CBFf: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFffff E6FC0505D7400D00F6FC8824DAA44A98db00 ; 3

;And use e-points: f.e DAE0A0CB for swap to normal profile.

__________________________________________________ _

Edit:

Haha!!

Quote:

AFA sets profile 3 - from first entry only... next 2 entries were passed over.

Try again with version I've posted
As I tried patch without ret command every call to different profile was set to profile 3. Clear because the patch cycled through and the last profile was profile #3

@Goll@b
attention fo use with afa: please edit daxxxxx command you see position has always slightly changed

12-07-2005, 22:59	#1 (permalink)
GoLL@B Freak Poster Join Date: May 2005 Location: Somewhere in Poland Age: 36 Posts: 266 Member: 143475 Status: Offline Thanks Meter: 0	E-point for profile Do You know e-points for profile? I think about Profile 1 and Normal Environ.? I would like to have e-point for profile swapping... I found this: DAA44A98 - if we use it in another function of appointment it swaps profile to quiet environ... but other profiles? Can somebody help me?

12-08-2005, 13:04	#2 (permalink)
greenteas Major Poster Join Date: Oct 2005 Age: 48 Posts: 40 Member: 187352 Status: Offline Thanks Meter: 0	Hello GoLL@B ;This patch by RizaPN ,but I don't see in the "SLIKv56: Flash patches." ;I Modification this from sl45_v5508^_^ vkp for v56 0x40C9A0: FFFFFFFFFFFFFFFF E014F0C4DAA46698 0x40C9A8: FFFFFFFFFFFFFFFF 2D02E00C0D03F04C 0x40C9B0: FFFFFFFFFFFFFFFF 5C8C00C4D7400D00 0x40C9B8: FFFFFFFFFFFFFFFF F6FC8824DAA44A98 0x40C9C0: FFFF DB00 ;You can use "DAE0A0C9" in some shortcut,Realization Between both "Norm.Environ."& your setup As follows ;Also "Another_Function_of_Appointment" use it ;Goodlucky friend ;0x40C9A1:14 ?4 ;14-Quiet Environ. ;24-Noisy Environ. ;34-Profile 1. ;44-Profile 2. ;54-Profile 3 Last edited by greenteas; 12-08-2005 at 13:17.

12-08-2005, 16:45	#3 (permalink)
GoLL@B Freak Poster Join Date: May 2005 Location: Somewhere in Poland Age: 36 Posts: 266 Member: 143475 Status: Offline Thanks Meter: 0	Ok, thanks, I`ll try it Thanks my friend. EDIT: It has worked great so far. Thanks one more time It`s more practical than APS because we can readress it and later use other epoint. Last edited by GoLL@B; 12-08-2005 at 19:08.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SLIK: Entry point for profiles?	-+8+-	x4x, x5x Flashpatching	0	09-23-2009 16:16
Timer For Profiles in N82	hu55ain	Nokia Base Band 5 ( BB-5 )	0	06-27-2008 18:07
sl 45 i voice command for profiles	zeynel	x1x to x45/x50	0	09-10-2003 00:02
Look for Arrow-Up-Key for Profile-Swapping	mic.kan	Siemens-Benq Flash Patching	2	06-19-2003 09:57

12-10-2005, 08:24	#4 (permalink)
Xinshou Freak Poster Join Date: Apr 2005 Age: 24 Posts: 237 Member: 137411 Status: Offline Thanks Meter: 1	With "Another_Function_of_Appointment", you can make use of the above patch this way: Norm.Environ<=>your setup: DAE0A0C9 Norm.Environ<=>Quiet.Environ: E014DAE0A2C9 Norm.Environ<=>Noisy.Environ: E024DAE0A2C9

12-10-2005, 11:05	#5 (permalink)
GoLL@B Freak Poster Join Date: May 2005 Location: Somewhere in Poland Age: 36 Posts: 266 Member: 143475 Status: Offline Thanks Meter: 0	ps. I try readress patch from greenteas and I used 2 epoints for change 2 profiles, When I did it, I have always Normal Environ. -> so it`s no practical... @Xinshou And how can I back: f.e your setup --> normal environ, quiet environ. --> normal environ?

12-10-2005, 16:19	#6 (permalink)
greenteas Major Poster Join Date: Oct 2005 Age: 48 Posts: 40 Member: 187352 Status: Offline Thanks Meter: 0	Xinshou: please help translate

12-10-2005, 23:18	#7 (permalink)
trustkill No Life Poster Join Date: May 2003 Location: GERMANY Age: 49 Posts: 980 Member: 27745 Status: Offline Thanks Meter: 0	Its very easy, without any "addon-patch" !!! Here are the values for each profile for use with AFA: ;E6FC0000D7400D00F6FC8824DAA44A98 : Select Profile #0 (Normal) ;E6FC0101D7400D00F6FC8824DAA44A98 : Select Profile #1 (Quiet) ;E6FC0202D7400D00F6FC8824DAA44A98 : Select Profile #2 ;E6FC0303D7400D00F6FC8824DAA44A98 : Select Profile #3, ;E6FC0404D7400D00F6FC8824DAA44A98 : Select Profile #4, ;E6FC0505D7400D00F6FC8824DAA44A98 : Select Profile #5.

12-11-2005, 19:04	#8 (permalink)
GoLL@B Freak Poster Join Date: May 2005 Location: Somewhere in Poland Age: 36 Posts: 266 Member: 143475 Status: Offline Thanks Meter: 0	It works but only one time. I tried: At 18:50 I wrote: spspE6FC0303D7400D00F6FC8824DAA44A98 (sp-space) to 18:51 I did next entry and I wrote: spspE6FC0101D7400D00F6FC8824DAA44A98 from 18:55 to 18:56. and one more entry at 19:00 to 19:01 spspE6FC0000D7400D00F6FC8824DAA44A98. AFA sets profile 3 - from first entry only... next 2 entries were passed over. Why? What must I do to have all swapping?

12-11-2005, 19:18	#9 (permalink)
cyperghost No Life Poster Join Date: Oct 2003 Posts: 705 Member: 42457 Status: Offline Thanks Meter: 1	Annother method is to apply the swapping-code patch from riza (2 profiles) or the modified one from rc-flitzer (3 profiles) you are able to swap through the profiles by normal entrypoints, that means you can use this for AFA, FAV and annother things. Problem is... I don't know the data anymore. So please write rc-flitzer an small PM and he will surly write back to help you __________________ Edit: I revealed the posting ---> Click here So you don't have to write rc-flitzer (even he's a honest man ) I'm also 100% sure he can help you in swapping all profiles

12-11-2005, 23:02	#10 (permalink)
GoLL@B Freak Poster Join Date: May 2005 Location: Somewhere in Poland Age: 36 Posts: 266 Member: 143475 Status: Offline Thanks Meter: 0	Its strange in my opinion... All combinations work but only if I use one of them... If I try to use more than one , only first works correctly...

12-12-2005, 01:33	#11 (permalink)
Xinshou Freak Poster Join Date: Apr 2005 Age: 24 Posts: 237 Member: 137411 Status: Offline Thanks Meter: 1	GoLL@B: The problem is with your version of AFA, i.e. it can only execute one apoinment and set invalid other apointments. Here are the AFA patch modified by Coollang for v5508, which has solved above problem. (Pls try to port it to v56.) 0x38050C: E6F8A000 FABF4010 0x1F1040: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF DC49D418860046F120202D1747F22000 0x1F1050: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 8D04E6F8A000FAD81005DC49D4488800 0x1F1060: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 46F420003DF6DC49D4488A0046F42000 0x1F1070: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 3DF0E02CE6FE8C000D03E01CE6FE8800 0x1F1080: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 00E8E6FF0038DC49A92EBD0ABB125C41 0x1F1090: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF F132BB0F7123D7403700B92F08F10DF3 0x1F10A0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF E6F1DB00D7403700B81FDA0D00F8FAD8 0x1F10B0: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF 7204DC49A92E00EC27F2300047F20A00 0x1F10C0: FFFFFFFFFFFFFFFFFFFF 8D0367F2DF002927CB00 However it seems v5508 has one disadvantage, it cannot write so many codes in an Appointment entry as you do as below: "....entry and I wrote: spspE6FC0101D7400D00F6FC8824DAA44A98 from 18:55 to 18:56."

12-12-2005, 14:29	#13 (permalink)
cyperghost No Life Poster Join Date: Oct 2003 Posts: 705 Member: 42457 Status: Offline Thanks Meter: 1	That the idea Gollab is my hero Now we can create FAV Menü for direct selection of profiles.... @Gollab Please post your idea in sticky posting... It seems to be very usefull for further purposes