7650 Erasing Error - GSM-Forum

stylus735 · 08-13-2005, 13:37

hi all,

i have 7650 dead, i flash it by UFS n Griffin and didn't work anything, except '1St boot ok, wd 2 ..... ' i try to flash the phone, but i found an error messages
'errasing error at 10, ......' and griffin shown the message as 'flashing failed, error codes [11:ffff8200] when i'll press the check or flash button, phone lcd is blink in once time, so a few seconds the boxes show the error messages. do ur have any solution for it????

hlp me plz, thx before

kardelen gsm · 08-13-2005, 14:26

check cable and connection...full erase flash and try to flash the phone...regards

bestman · 08-13-2005, 14:36

Quote:

Originally Posted by kardelen gsm

check cable and connection...full erase flash and try to flash the phone...regards

follow this instruction again.

bestman

stylus735 · 08-15-2005, 16:29

I had checked the cable that connected the box with phone, and i think my cable doesn't have any trouble. it's proved by i can flashing between two to three phone with the same types (7650) and they can works perfectly before... so did my box didn't show error message . this is the third time with the same problems and the same phone types. and i think this problems can be solved with some tricks as in testpoint in siemens phone..

i hope you can help me to solve my problem. thanx before for ur helps.

cellco_mann · 08-16-2005, 10:26

Quote:

Originally Posted by stylus735

I had checked the cable that connected the box with phone, and i think my cable doesn't have any trouble. it's proved by i can flashing between two to three phone with the same types (7650) and they can works perfectly before... so did my box didn't show error message . this is the third time with the same problems and the same phone types. and i think this problems can be solved with some tricks as in testpoint in siemens phone..

i hope you can help me to solve my problem. thanx before for ur helps.

Try with old verson of DCTX. I also faced same problem in flashing ngage qd.But when i try flashing with old verson dctx toolsv1.3_d then my problem is solved.So try with old verson.

08-13-2005, 13:37	#1 (permalink)
stylus735 Junior Member Join Date: Aug 2005 Age: 39 Posts: 6 Member: 167745 Status: Offline Thanks Meter: 0	7650 Erasing Error hi all, i have 7650 dead, i flash it by UFS n Griffin and didn't work anything, except '1St boot ok, wd 2 ..... ' i try to flash the phone, but i found an error messages 'errasing error at 10, ......' and griffin shown the message as 'flashing failed, error codes [11:ffff8200] when i'll press the check or flash button, phone lcd is blink in once time, so a few seconds the boxes show the error messages. do ur have any solution for it???? hlp me plz, thx before

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7650 erase error	LHOT	WD2 & APE (Symbian Phones)	2	05-21-2006 12:43
7650 erasing error???	manju	Nokia Hardware & Hardware Repair	4	02-03-2006 04:01
7650 erase error	M e L o d Y	WD2 & APE (Symbian Phones)	1	10-23-2005 12:21
7650 Erasing Error (hardware Problem)	tan2x81	Nokia Hardware & Hardware Repair	8	06-21-2005 05:02
7650 erase and then error	MAK_US1977	WD2 & APE (Symbian Phones)	8	06-22-2003 12:00

08-13-2005, 14:26	#2 (permalink)
kardelen gsm No Life Poster Join Date: Apr 2005 Location: Turkey/Kastamonu Age: 52 Posts: 829 Member: 133173 Status: Offline Thanks Meter: 119	check cable and connection...full erase flash and try to flash the phone...regards

08-15-2005, 16:29	#4 (permalink)
stylus735 Junior Member Join Date: Aug 2005 Age: 39 Posts: 6 Member: 167745 Status: Offline Thanks Meter: 0	I had checked the cable that connected the box with phone, and i think my cable doesn't have any trouble. it's proved by i can flashing between two to three phone with the same types (7650) and they can works perfectly before... so did my box didn't show error message . this is the third time with the same problems and the same phone types. and i think this problems can be solved with some tricks as in testpoint in siemens phone.. i hope you can help me to solve my problem. thanx before for ur helps.