9300 &9300i Arabic

[avroy7]

9300 and 9300 i ,i can make Arabic with L30 and u 30,
but i cant write Arabicc with communicater key pad,
but phone key pad ok,
any solution ?
pl help

[GSM SHADOW]

if Ur using jaf or Phoenix mark on change product profile

[avroy7]

you mean upload PP ?

am using Jaf and Mt box
Thank you!

[lionheart_sadly]

can some body help me to found flash file arabic to 9300i

[BamBlue]

i flashed 9300i befor and its full arabic with write arabic too

but today i flash another one and it dosn't write arabic i upload 9300 pp and it work done till now but old arabic sms dont wanna open u can do it, if u dont have old sms and here is the file

hope it be usefull

[iman116]

hi
sorry i can't good speak english
please help me for selected flash files for 9300
arabic please
thanks

[elOSTOra]

use this txt will help u

[mansi]

for 9300i
Nokia_firmware_RA-8_EMEA_2.0_ccs <-- does not contain arabic [tested]
58599339_Nokia_firmware_RA-8_EMEA_1.0 <-- this older version contains arabic [also tested]

MCU: RA8_5501.1501
APE vnt: RA8n5501.l30
APE UsrD: RA8n5501.u30
ADSP: RA8n5501.c02
-------------------------------------------------
9300 [any version]
i use RAE-6_4.0_CCS_emea_MCU_5_22
MCU: RAE6_h56pr3.060
APE vnt: RAE6n4537.l30
APE UsrD: RAE6n4537.u30
ADSP: RAE6n4537.c02

you need to plug the DKU2 cable along with the F-bus cable for ADSP flashing.
P.S: you need to change PP [Product Profile] to write arabic from the inside [comunicator part].


BR
Mansi

[enamul]

my 9300 taking factory settings but its not taking flash every time its loader error.any solution pls & express the flshing system kindly.

[enamul]

Getting MCU ID

MCU ID: 0x2142
FLASH ID0: 22FA00EC <=> SAMSUNG (SEC) -> K8S6415ETA Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
INI file .ini is missing. Continue searching for second ini type...
Changing flashing settings...
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RAE-6\RAE6_5227.5501
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: C:\Program Files\Nokia\Phoenix\Products\RAE-6\RAE6n5227.c01
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RAE-6\RAE6n5227.l02
APE User Flash file: C:\Program Files\Nokia\Phoenix\Products\RAE-6\RAE6n5227.u02
Languages in ppm: Finnish,English,Swedish
Backing up PM Field 208 as RPL...
Setting local mode...
Reading IMEI...
Reading IMEI data...
Building RPL backup file...
C:\Program Files\ODEON\JAF\ProgData\354321001225038_imei_back up_1638205.rpl
Done!
Backup imei OK!
MCU: C:\Program Files\Nokia\Phoenix\Products\RAE-6\RAE6_5227.5501
Booting phone...
MCU ID: 0x2142
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A0
Boot is ready...
FLASH ID0: 22FA00EC <=> SAMSUNG (SEC) -> K8S6415ETA Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0xFA22EC00
Flash loader is C:\Program Files\ODEON\JAF\Flash\m_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x8130; Loader chk: 63
Error Loading loader!.....the sets fault is the bigger display shows only nokia & after a while its blank.whats the fault& whats the solution.pls

[ammar_sh]

thank you Mr BamBlue for the pp file

[coolmoney]

pls help 9300 flashfile selection process.

[mr_mobile_isb]

Here is the LINK for 9300, 9300i ARABIC FLASH FILES
FILE SELECTION METHOD is also GIVEN
ENJOY

http://depositfiles.com/files/qc4mtbkyk



Mr. MOBILE
ISLAMABAD