big bad problem with nokia ngage,please help me! - GSM-Forum

SicilianBoy · 12-01-2005, 19:02

has anybody ever seen this problem with a nokia ngage when trying to flash it with the nbox???? its driving me crazy please help me!!

1st Boot Ok, WD2 STARSHIP, UPP: 0082
Fl0: 0x00000000-0x007FFFFF,0001257E,Amd 29BDS643GT
Fl1: 0x02000000-0x027FFFFF,0001257E,Amd 29BDS643GT
Fl2: 0x04000000-0x047FFFFF,25020040,
Algorithm: s2_amd_b.fia
Algorithm Ok, MSID: 84A9B35E1A2B68C6CDD98A4685
Decoded MSID: 3E4EBAF7-00470CBD-A8000000
Encoded FAID: F490A37E-77FA1286-76DAC5BB
Area1: 0x00000000-0x0000FFFF Erased, Time: 00000
Area2: 0x00010000-0x006FFFFF Erased, Time: 00115
Area3: 0x02000000-0x023FFFFF Erased, Time: 00044
Erasing: 0x04000000-0x046B4FFF ...
Erasing Error: 10, at: 0x04000000-0x0401FFFF, 940207, Time: 00000
Process Failed, Repowering Mobile

what can i do? the phone is completely dead!!!!!!

PLEASE HELPPPP

thanks in advance

BB-gsm · 12-01-2005, 19:24

Don`t worry m8 !

Check PM

Regards,
B

SicilianBoy · 12-01-2005, 19:38

so i need a lower version of dctx_ for it to work? i got dctx_1.3_m,anyone knows a place where a can get a lower version?

thanks again!

pazeth™ · 12-01-2005, 20:01

Quote:

Originally Posted by SicilianBoy

so i need a lower version of dctx_ for it to work? i got dctx_1.3_m,anyone knows a place where a can get a lower version?
thanks again!

check flash using other flash as griffin if you have problem check your flash IC

**.::Gsmdenis::.** · 12-01-2005, 20:25

Erasing Error: 10, at: 0x04000000-0x0401FFFF

via tools reerase this address and then flash

BR.,

SicilianBoy · 12-01-2005, 20:29

u guys talk a really professional language...i dont understand...can u please me explain it a little easier? i only have n-box right now...what can i do with this box?

P.S: GsmDenis: please can u let me understand how can i erase the address? can i do it with nbox?

thanks later

sameh_safa · 12-01-2005, 22:11

Quote:

Originally Posted by SicilianBoy

has anybody ever seen this problem with a nokia ngage when trying to flash it with the nbox???? its driving me crazy please help me!!
1st Boot Ok, WD2 STARSHIP, UPP: 0082
Fl0: 0x00000000-0x007FFFFF,0001257E,Amd 29BDS643GT
Fl1: 0x02000000-0x027FFFFF,0001257E,Amd 29BDS643GT
Fl2: 0x04000000-0x047FFFFF,25020040,
Algorithm: s2_amd_b.fia
Algorithm Ok, MSID: 84A9B35E1A2B68C6CDD98A4685
Decoded MSID: 3E4EBAF7-00470CBD-A8000000
Encoded FAID: F490A37E-77FA1286-76DAC5BB
Area1: 0x00000000-0x0000FFFF Erased, Time: 00000
Area2: 0x00010000-0x006FFFFF Erased, Time: 00115
Area3: 0x02000000-0x023FFFFF Erased, Time: 00044
Erasing: 0x04000000-0x046B4FFF ...
Erasing Error: 10, at: 0x04000000-0x0401FFFF, 940207, Time: 00000
Process Failed, Repowering Mobile
what can i do? the phone is completely dead!!!!!!
PLEASE HELPPPP
thanks in advance

hi evry body this error is from flash
1- try to change your flash algorithem to another higher one and make your flash if the same problem appear so ..
2- the error from the 3'rd flash ic change it and it well be work .
i have this problem much time and it work with me ...
good luck

SicilianBoy · 12-02-2005, 00:34

1) how do i change my flash algoritm(i use nbox)

2) how do i change the 3'rd flash ic? from the dctx_1.3_m i can do all of these operations?

please help me!

P.S:when i flash the phone i dont also use the usb-mini usb cable,can it be the problem? also where can i find the correct drivers for it?

thanks again

please i need the N-gage USB drivers badly,please anyone can give me a link or send me a pm to help me! thanks a lot,really!

sameh_safa · 12-03-2005, 11:20

Quote:

Originally Posted by SicilianBoy

1) how do i change my flash algoritm(i use nbox)
2) how do i change the 3'rd flash ic? from the dctx_1.3_m i can do all of these operations?
please help me!
P.S:when i flash the phone i dont also use the usb-mini usb cable,can it be the problem? also where can i find the correct drivers for it?
thanks again
please i need the N-gage USB drivers badly,please anyone can give me a link or send me a pm to help me! thanks a lot,really!

1- you can chang the flash algorithem bu opening the path
c:\program file\nokia\phonix\flash
and delete the content of this folder and put a newer vergine of flash algorithemthat you can download it from the site of n box support .
2- changing the 3'rd flash is by hard ware not software.
and there no problem to use or not using the usb-mini usb cable it is not the problem

SicilianBoy · 12-05-2005, 12:25

sameh i followed your help on point 1 but it didnt help so now i would like to follow your help on point 2 so please could u basicly tell me how do i change the 3'rd flash? its an hardware stuff ok but what should i do? perhaps u have a link???thanks a lot

sameh_safa · 12-05-2005, 18:24

Quote:

Originally Posted by SicilianBoy

sameh i followed your help on point 1 but it didnt help so now i would like to follow your help on point 2 so please could u basicly tell me how do i change the 3'rd flash? its an hardware stuff ok but what should i do? perhaps u have a link???thanks a lot

hi Siciliantboy you can change 3'd flash by botting flux on the ic and use a hot air on the ic with tempreture 350 to 380 degree and bick up the ic when the soldring is melting and clean under it and but the new one by the same task.
good luck

Drug_Store · 12-10-2005, 19:07

Follow BB-gsm advice. Use lower version of your Nbox software.
Uninstall all the Nbox software and install lower version.

12-01-2005, 19:02	#1 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 44 Posts: 2,115 Member: 88333 Status: Offline Thanks Meter: 48	big bad problem with nokia ngage,please help me! has anybody ever seen this problem with a nokia ngage when trying to flash it with the nbox???? its driving me crazy please help me!! 1st Boot Ok, WD2 STARSHIP, UPP: 0082 Fl0: 0x00000000-0x007FFFFF,0001257E,Amd 29BDS643GT Fl1: 0x02000000-0x027FFFFF,0001257E,Amd 29BDS643GT Fl2: 0x04000000-0x047FFFFF,25020040, Algorithm: s2_amd_b.fia Algorithm Ok, MSID: 84A9B35E1A2B68C6CDD98A4685 Decoded MSID: 3E4EBAF7-00470CBD-A8000000 Encoded FAID: F490A37E-77FA1286-76DAC5BB Area1: 0x00000000-0x0000FFFF Erased, Time: 00000 Area2: 0x00010000-0x006FFFFF Erased, Time: 00115 Area3: 0x02000000-0x023FFFFF Erased, Time: 00044 Erasing: 0x04000000-0x046B4FFF ... Erasing Error: 10, at: 0x04000000-0x0401FFFF, 940207, Time: 00000 Process Failed, Repowering Mobile what can i do? the phone is completely dead!!!!!! PLEASE HELPPPP thanks in advance

12-02-2005, 00:34	#8 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 44 Posts: 2,115 Member: 88333 Status: Offline Thanks Meter: 48	1) how do i change my flash algoritm(i use nbox) 2) how do i change the 3'rd flash ic? from the dctx_1.3_m i can do all of these operations? please help me! P.S:when i flash the phone i dont also use the usb-mini usb cable,can it be the problem? also where can i find the correct drivers for it? thanks again please i need the N-gage USB drivers badly,please anyone can give me a link or send me a pm to help me! thanks a lot,really! Last edited by SicilianBoy; 12-02-2005 at 01:33.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem with nokia 2610 please help me	funkyali987	Nokia Digital Core Technology 4 ( DCT-4 )	4	12-15-2008 16:27
Big Problem with incoming call please helpe me.	Aydin007	SpiderMan	0	07-01-2008 14:43
problem with my ufs !!! please help me!!	bentys2000	UFS2 + UFS3-Tornadoflasher	0	05-29-2007 10:25
Problem with x620 Infrared Please Help me	tehseen ahmed	Samsung Hardware Repair	0	05-07-2007 07:52
Problem with x620 Infrared Please Help me	tehseen ahmed	SYSOL Platform	0	05-05-2007 10:13

12-01-2005, 19:24	#2 (permalink)
BB-gsm No Life Poster Join Date: Jul 2004 Location: GEORGIA,Tbilisi Posts: 3,393 Member: 75765 Status: Offline Thanks Meter: 722	Don`t worry m8 ! Check PM Regards, B

12-01-2005, 19:38	#3 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 44 Posts: 2,115 Member: 88333 Status: Offline Thanks Meter: 48	so i need a lower version of dctx_ for it to work? i got dctx_1.3_m,anyone knows a place where a can get a lower version? thanks again!

12-01-2005, 20:25	#5 (permalink)
.::Gsmdenis::. Product Manager Join Date: Aug 2002 Location: MFC Posts: 8,297 Member: 79315 Status: Offline Thanks Meter: 6,024	Erasing Error: 10, at: 0x04000000-0x0401FFFF via tools reerase this address and then flash BR.,

12-01-2005, 20:29	#6 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 44 Posts: 2,115 Member: 88333 Status: Offline Thanks Meter: 48	u guys talk a really professional language...i dont understand...can u please me explain it a little easier? i only have n-box right now...what can i do with this box? P.S: GsmDenis: please can u let me understand how can i erase the address? can i do it with nbox? thanks later

12-05-2005, 12:25	#10 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 44 Posts: 2,115 Member: 88333 Status: Offline Thanks Meter: 48	sameh i followed your help on point 1 but it didnt help so now i would like to follow your help on point 2 so please could u basicly tell me how do i change the 3'rd flash? its an hardware stuff ok but what should i do? perhaps u have a link???thanks a lot

12-10-2005, 19:07	#12 (permalink)
Drug_Store No Life Poster Join Date: Sep 2002 Location: Portugal Posts: 8,456 Member: 15312 Status: Offline Sonork: 100.1576041 Thanks Meter: 1,097	Follow BB-gsm advice. Use lower version of your Nbox software. Uninstall all the Nbox software and install lower version.