Contact retailer on 6600. cant format user area - GSM-Forum

faisalhq · 01-30-2004, 16:18

Hi all,
I am having problems formating user area of 6600. Plz help me out, i cant format it with tornado nor directly on phone. My phone is stuck on contact retailer. Below i have given the output from tornado.

Detected: V 3.42.1 16-10-03 NHL-10 (c) NMP
1st Boot Ok, WD2, UPP: 0082
2nd Boot Ok, FLID: 0001267E, Amd 29BDS643HT
Algorithm: w2_amd.fia, w2_cbusb.fia
Algorithm Ok, MSID: 84EE21A278E9105F5687903C94
Decoded MSID: 3E4EBAF7-005A104B-A9000000
Encoded FAID: 66884AD6-BFBBBD73-E6E0CDE8
Area: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area: 0x00010000-0x007FFFFF Erased, Time: 01:05
Area: 0x04000000-0x046FFFFF Erased, Time: 00:55
Area: 0x06000000-0x066BFFFF Erased, Time: 00:53
Area: 0x047C0000-0x047EFFFF Erased, Time: 00:01
BT MCM (21) Image Found: 0x0002DD94
BT MCM Registering Done
MCU Flashing Completed, Time: 10:15
Area: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area: 0x02000000-0x0214FFFF Erased, Time: 00:10
PPM Flashing Completed, Time: 00:35
Flashing Completed, Rebooting Mobile
All Done, Time: 14:29
Init Normal Mode Ok, Time: 01:16
Init Local Mode Ok, Time: 00:22
User Area Format Failed
00000000: 01 01 E0 00 FF 2D 00 00 .....-..

BOYO354 · 02-11-2004, 21:27

just try unlock. then factory default
it works for me.

dydycom · 02-14-2004, 03:37

http://forum.gsmhosting.com/vbb/showthread.php?t=126808

doctormobile · 02-14-2004, 09:24

Try with Griffin box!
I had the same problem with UFS-2 but Griffin make it succesfull!

Luciano · 02-23-2004, 19:17

I had an 6600 with error Phone Start-up failed. Contact retailer.
and here is what I found:

Self test in Phoenix all is OK.
Format User area/system is not possible:
- With Phoenix Stop at 75%.
- With kepay format stop also at aprox 45%.
- UFS, Griffin not able to format also... errror

Flashing is OK no error at all.

I try to erase FULL (with UFS) the flash inside and I got error on adress 2740000-275FFFF
-> flash chip is damaged ?!?
-> hardware problem ?!?

GSM Deals · 02-23-2004, 19:39

hi
did you check your cable cause many guy encoutred this problem on 3650
and solved it adding a resistor 3.3 K OHM to BSI

regards

Quote:

Originally Posted by Guciano

I had an 6600 with error Phone Start-up failed. Contact retailer.
and here is what I found:

Self test in Phoenix all is OK.
Format User area/system is not possible:
- With Phoenix Stop at 75%.
- With kepay format stop also at aprox 45%.
- UFS, Griffin not able to format also... errror

Flashing is OK no error at all.

I try to erase FULL (with UFS) the flash inside and I got error on adress 2740000-275FFFF
-> flash chip is damaged ?!?
-> hardware problem ?!?

Luciano · 02-23-2004, 19:46

Quote:

Originally Posted by GSM Deals

hi
did you check your cable cause many guy encoutred this problem on 3650
and solved it adding a resistor 3.3 K OHM to BSI

regards

sure, cable is OK.. I have many cables and in Phoenix I use original Nokia adapter-cable, equipment.

If you noticed I got error if I full erase flash chip only on that block !

br
L.

kingofhearts · 03-02-2004, 13:21

I have also getting the same problem. What to do?

AWAIS · 03-02-2004, 13:30

Guys three key solution is best for this problem

no need to use any soft

Luciano · 03-02-2004, 13:35

if key is not solving you'r problem then... it is HW faulty one flash damaged...

MicrostarGSM® · 03-02-2004, 13:41

have you try with Griffin with their Erase file????

Leo140 · 03-02-2004, 21:03

Quote:

Originally Posted by MicrostarGSM®

have you try with Griffin with their Erase file????

can you pls show me how to use eraese file with griffin box, step by step plsssss

Leo140 · 03-03-2004, 08:59

Quote:

Originally Posted by AWAIS

Guys three key solution is best for this problem

no need to use any soft

I got the same problem, I have tried to format with 3 keys, but it stopoed in the minddle, what can I do

Leo140 · 03-03-2004, 09:00

Quote:

Originally Posted by MicrostarGSM®

have you try with Griffin with their Erase file????

Hi you
would you might telling me how to use erease file in griffin

kingofhearts · 03-03-2004, 19:27

Just flash this file as a PPM and it will erase all the eeprom and user data. After that then flash your phone normally, upload PM from working phone and reset splock viola. If its a software fault then it may be 100% other wise it may hardware problem as described by the Guciano.

Best of Luck!

01-30-2004, 16:18	#1 (permalink)
faisalhq Junior Member Join Date: Jan 2004 Age: 49 Posts: 3 Member: 50721 Status: Offline Thanks Meter: 0	Contact retailer on 6600. cant format user area Hi all, I am having problems formating user area of 6600. Plz help me out, i cant format it with tornado nor directly on phone. My phone is stuck on contact retailer. Below i have given the output from tornado. Detected: V 3.42.1 16-10-03 NHL-10 (c) NMP 1st Boot Ok, WD2, UPP: 0082 2nd Boot Ok, FLID: 0001267E, Amd 29BDS643HT Algorithm: w2_amd.fia, w2_cbusb.fia Algorithm Ok, MSID: 84EE21A278E9105F5687903C94 Decoded MSID: 3E4EBAF7-005A104B-A9000000 Encoded FAID: 66884AD6-BFBBBD73-E6E0CDE8 Area: 0x00000000-0x0000FFFF Erased, Time: 00:00 Area: 0x00010000-0x007FFFFF Erased, Time: 01:05 Area: 0x04000000-0x046FFFFF Erased, Time: 00:55 Area: 0x06000000-0x066BFFFF Erased, Time: 00:53 Area: 0x047C0000-0x047EFFFF Erased, Time: 00:01 BT MCM (21) Image Found: 0x0002DD94 BT MCM Registering Done MCU Flashing Completed, Time: 10:15 Area: 0x00000000-0x0000FFFF Erased, Time: 00:00 Area: 0x02000000-0x0214FFFF Erased, Time: 00:10 PPM Flashing Completed, Time: 00:35 Flashing Completed, Rebooting Mobile All Done, Time: 14:29 Init Normal Mode Ok, Time: 01:16 Init Local Mode Ok, Time: 00:22 User Area Format Failed 00000000: 01 01 E0 00 FF 2D 00 00 .....-..

02-14-2004, 03:37	#3 (permalink)
dydycom Freak Poster Join Date: Jan 2003 Location: hell (gsm bussines) Age: 49 Posts: 142 Member: 19875 Status: Offline Thanks Meter: 3	have a look http://forum.gsmhosting.com/vbb/showthread.php?t=126808

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can't format-contact retailer on nokia 6600	dreameye	WD2 & APE (Symbian Phones)	3	03-20-2009 12:35
the new contact retailer on 6600	nolyboy	Nokia Hardware & Hardware Repair	2	12-01-2005 01:21
Contact retailer on 6600. cant format user area.	faisalhq	Nokia Digital Core Technology 4 ( DCT-4 )	1	02-01-2004 14:41
Support Format User area on 6600??	bestncheap	Griffin	16	12-23-2003 07:47

02-11-2004, 21:27	#2 (permalink)
BOYO354 Junior Member Join Date: Oct 2003 Location: INDONESIA Age: 46 Posts: 4 Member: 40714 Status: Offline Thanks Meter: 0	just try unlock. then factory default it works for me.

02-14-2004, 09:24	#4 (permalink)
doctormobile Major Poster Join Date: Dec 2001 Posts: 48 Member: 7905 Status: Offline Thanks Meter: 0	Try with Griffin box! I had the same problem with UFS-2 but Griffin make it succesfull!

02-23-2004, 19:17	#5 (permalink)
Luciano Freak Poster Join Date: Aug 2001 Location: RO Posts: 479 Member: 5992 Status: Offline Thanks Meter: 1	I had an 6600 with error Phone Start-up failed. Contact retailer. and here is what I found: Self test in Phoenix all is OK. Format User area/system is not possible: - With Phoenix Stop at 75%. - With kepay format stop also at aprox 45%. - UFS, Griffin not able to format also... errror Flashing is OK no error at all. I try to erase FULL (with UFS) the flash inside and I got error on adress 2740000-275FFFF -> flash chip is damaged ?!? -> hardware problem ?!?

03-02-2004, 13:21	#8 (permalink)
kingofhearts No Life Poster Join Date: Jan 2002 Location: Karachi, Pakistan Posts: 866 Member: 8710 Status: Offline Sonork: 1576303 Thanks Meter: 197	I have also getting the same problem. What to do?

03-02-2004, 13:30	#9 (permalink)
AWAIS No Life Poster Join Date: Oct 2002 Location: Pakistan Age: 45 Posts: 2,354 Member: 16520 Status: Offline Sonork: 1580837 Thanks Meter: 90	Guys three key solution is best for this problem no need to use any soft

03-02-2004, 13:35	#10 (permalink)
Luciano Freak Poster Join Date: Aug 2001 Location: RO Posts: 479 Member: 5992 Status: Offline Thanks Meter: 1	if key is not solving you'r problem then... it is HW faulty one flash damaged...

03-02-2004, 13:41	#11 (permalink)
MicrostarGSM® No Life Poster Join Date: Dec 2002 Age: 47 Posts: 4,775 Member: 18855 Status: Offline Thanks Meter: 1,938	have you try with Griffin with their Erase file????

03-03-2004, 19:27	#15 (permalink)
kingofhearts No Life Poster Join Date: Jan 2002 Location: Karachi, Pakistan Posts: 866 Member: 8710 Status: Offline Sonork: 1576303 Thanks Meter: 197	Just flash this file as a PPM and it will erase all the eeprom and user data. After that then flash your phone normally, upload PM from working phone and reset splock viola. If its a software fault then it may be 100% other wise it may hardware problem as described by the Guciano. Best of Luck!