Help In Flashing 3230 With Ufs3 - GSM-Forum

aseemvizag · 06-27-2006, 08:12

1st Boot Ok, WD2, UPP: 1081
2nd Boot Error: 2
Platform: 6, Error Data:
F3 72 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

BUT THE HANDSET SHOWS BLANK SCREEN ON POWERING ON BUT DOSENT SHOWS NOKIA LOGO OR DOSENT EVEN POWER OFF. WHEN TRIED TO FLASH THE ABOVE MENTIONED PROBLEM ARISES.

HANDSET WAS WATER LOGGED AND PROPERLY CLEANED, IN SEARCH FOUND THAT THE PROBLEM MIGHT BE WITH UPP, UEM OR FLASH IC BUT REQUIRES HELP TO PROCEED FURTHER.

west_bound · 06-27-2006, 08:17

uncheck the enable bt flashing box and see what happens

aseemvizag · 06-28-2006, 07:28

3230 Dosent Have Bt Option Activaed While Flashing, This Option Is Only Enabled For Handsets Which Has A Seprate Bt Module

trinhngoctrung · 06-28-2006, 18:09

I have the same problem while flashing Nokia 3650!
A day before, it was in good condition, but to day when power on, nothing happen! The screen display nothing too.
Using UFS3, I flash it, but the interface say as below:
Can somebody help me!
Thanks in advance,

Andra · 06-28-2006, 20:30

cange ram ic

najjarsat · 06-28-2006, 21:00

first check cable connectiont if you have the same problem rehot the pcb normely it will be ok

sijin p · 05-03-2007, 15:25

reball/replace ram ic

06-27-2006, 08:12	#1 (permalink)
aseemvizag Member deceased !! Join Date: Jan 2006 Location: INDIA Age: 40 Posts: 261 Member: 226535 Status: Offline Thanks Meter: 7	Help In Flashing 3230 With Ufs3 1st Boot Ok, WD2, UPP: 1081 2nd Boot Error: 2 Platform: 6, Error Data: F3 72 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 BUT THE HANDSET SHOWS BLANK SCREEN ON POWERING ON BUT DOSENT SHOWS NOKIA LOGO OR DOSENT EVEN POWER OFF. WHEN TRIED TO FLASH THE ABOVE MENTIONED PROBLEM ARISES. HANDSET WAS WATER LOGGED AND PROPERLY CLEANED, IN SEARCH FOUND THAT THE PROBLEM MIGHT BE WITH UPP, UEM OR FLASH IC BUT REQUIRES HELP TO PROCEED FURTHER.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Urgent Help In Nokia 3230	nageshh	WD2 & APE (Symbian Phones)	15	02-24-2010 16:32
need help flashing 7710 with ufs3	meisam	UFS2 + UFS3-Tornadoflasher	1	12-19-2005 23:36
how can i flash k700i with ufs3 boxes	kikoman	UFS2 + UFS3-Tornadoflasher	13	12-11-2004 19:40
flashing 5140 with ufs3?	inox	UFS2 + UFS3-Tornadoflasher	3	10-27-2004 21:25
can`t flash 5210 with ufs3	celltrix	UFS2 + UFS3-Tornadoflasher	0	09-11-2004 16:32

06-27-2006, 08:17	#2 (permalink)
west_bound Freak Poster Join Date: Aug 2005 Location: pearl of the orient Posts: 319 Member: 170968 Status: Offline Thanks Meter: 7	uncheck the enable bt flashing box and see what happens

06-28-2006, 07:28	#3 (permalink)
aseemvizag Member deceased !! Join Date: Jan 2006 Location: INDIA Age: 40 Posts: 261 Member: 226535 Status: Offline Thanks Meter: 7	3230 Dosent Have Bt Option Activaed While Flashing, This Option Is Only Enabled For Handsets Which Has A Seprate Bt Module

06-28-2006, 20:30	#5 (permalink)
Andra No Life Poster Join Date: Feb 2005 Location: AD Posts: 4,665 Member: 976728 Status: Offline Sonork: 1589709 Thanks Meter: 4,775	cange ram ic

06-28-2006, 21:00	#6 (permalink)
najjarsat Junior Member Join Date: Feb 2005 Age: 42 Posts: 38 Member: 117836 Status: Offline Thanks Meter: 0	first check cable connectiont if you have the same problem rehot the pcb normely it will be ok

05-03-2007, 15:25	#7 (permalink)
sijin p Junior Member Join Date: Mar 2007 Posts: 2 Member: 475472 Status: Offline Thanks Meter: 0	reball/replace ram ic