Nokia 7650 - GSM-Forum

Hazard · 09-02-2004, 18:30

I have a 7650 and wen i switch it on, it freezes by the nokia logo. ive flashes it but it still does the same thing.

Hazard · 09-02-2004, 19:56

ok, i used twister to erash the flash, then i flashed it again but now wen it starts up it ses startup failed, contact retailer.

Hazard · 09-02-2004, 22:13

i managed to get rid of the contact retailer but now it keeps telling me sim card rejected after putting in any sim... and i cant unlock it coz it gives some error with the imei number but it reads the imei properly. i use twister

**GSM MIND** · 09-03-2004, 15:51

WHILE me using griffin dont know about twister use griffin and full flash ur phone and then format user area, factory LM and factory rest , install pm file and unlock ur phoen will be work proberly

wbr

admtehnosrl · 09-11-2004, 11:35

Hello
I Have A 7650 Wich Makes Some Lines When I Press The Power Button
The Lines Are Black And Orizontaly I Hawe No Light Only Lines.
Thank You In Advance!!!!

Hazard · 09-12-2004, 11:32

check if your ribbon on the fone is making proper contact and if there aint any tracks missing. And i got my 7650 right, i flashed it, and reset factory setting and format user area and it works.

Maurone · 09-13-2004, 03:13

Quote:

Originally Posted by admtehnosrl

Hello
I Have A 7650 Wich Makes Some Lines When I Press The Power Button
The Lines Are Black And Orizontaly I Hawe No Light Only Lines.
Thank You In Advance!!!!

Hi friend,

i've your same problem with 7650! Have you resolve it? How?

thanks in advance!

XARiUS · 09-13-2004, 03:45

@Hazard
If you erased whole flash i think you need a rpl because imei part of the flash isn't valid!

@Maurone
Last 7650 i got it a simmilar problem, it got the Flash IC bad soldered! Try to reflow it! DO NOT TAKE IT OUT AND REBALL IT! I can't manage to reball these new chips!

Best Regards
XARiUS

admtehnosrl · 09-13-2004, 10:02

Quote:

Originally Posted by admtehnosrl

Hello
I Have A 7650 Wich Makes Some Lines When I Press The Power Button
The Lines Are Black And Orizontaly I Hawe No Light Only Lines.
Thank You In Advance!!!!

ok i'l try
thank you

Hazard · 09-14-2004, 12:40

@Xarius
Nope, ive erased the flash and reflashed it and the imei is still there. Dont need rpl file

XARiUS · 09-14-2004, 17:08

And what makes you think that imei doesn't come from the UEM?

Best Regards
XARiUS

Hazard · 09-15-2004, 20:38

it does but wut im trying to say is that if u erase the flash with Twister, it doesnt erase the imei number, only wen u change the UEM do u have to rebuild the imei.

09-02-2004, 18:30	#1 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	Nokia 7650 I have a 7650 and wen i switch it on, it freezes by the nokia logo. ive flashes it but it still does the same thing.

09-11-2004, 11:35	#5 (permalink)
admtehnosrl Freak Poster Join Date: Aug 2004 Age: 41 Posts: 144 Member: 79291 Status: Offline Thanks Meter: 9	7650 No Power On!!!!!! Need Help!!!!!! Hello I Have A 7650 Wich Makes Some Lines When I Press The Power Button The Lines Are Black And Orizontaly I Hawe No Light Only Lines. Thank You In Advance!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 7650 boot failed, stuck only in NOKIA logo	ianskiee	Nokia Hardware & Hardware Repair	0	03-07-2006 10:22
nokia 8310 y nokia 7650	zizou23	Phone Unlocking Codes & Maps	0	02-28-2003 18:53
Nokia 7650	h.man	WD2 & APE (Symbian Phones)	1	07-06-2002 06:32
Nokia 7650	fofodaman	Main Sales Section	2	05-12-2002 11:05
Buy Nokia 7650....is it actually available anywhere?	Nokia man	WD2 & APE (Symbian Phones)	1	04-04-2002 21:07

09-02-2004, 19:56	#2 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	ok, i used twister to erash the flash, then i flashed it again but now wen it starts up it ses startup failed, contact retailer.

09-02-2004, 22:13	#3 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	i managed to get rid of the contact retailer but now it keeps telling me sim card rejected after putting in any sim... and i cant unlock it coz it gives some error with the imei number but it reads the imei properly. i use twister

09-03-2004, 15:51	#4 (permalink)
GSM MIND Product Manager Join Date: Feb 2003 Location: Your Exclusive Source Posts: 2,881 Member: 20645 Status: Offline Sonork: 100.1579175 Thanks Meter: 635	WHILE me using griffin dont know about twister use griffin and full flash ur phone and then format user area, factory LM and factory rest , install pm file and unlock ur phoen will be work proberly wbr

09-12-2004, 11:32	#6 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	check if your ribbon on the fone is making proper contact and if there aint any tracks missing. And i got my 7650 right, i flashed it, and reset factory setting and format user area and it works.

09-13-2004, 03:45	#8 (permalink)
XARiUS Freak Poster Join Date: May 2002 Location: Portugal Age: 42 Posts: 267 Member: 12207 Status: Offline Thanks Meter: 2	@Hazard If you erased whole flash i think you need a rpl because imei part of the flash isn't valid! @Maurone Last 7650 i got it a simmilar problem, it got the Flash IC bad soldered! Try to reflow it! DO NOT TAKE IT OUT AND REBALL IT! I can't manage to reball these new chips! Best Regards XARiUS

09-14-2004, 12:40	#10 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	@Xarius Nope, ive erased the flash and reflashed it and the imei is still there. Dont need rpl file

09-14-2004, 17:08	#11 (permalink)
XARiUS Freak Poster Join Date: May 2002 Location: Portugal Age: 42 Posts: 267 Member: 12207 Status: Offline Thanks Meter: 2	And what makes you think that imei doesn't come from the UEM? Best Regards XARiUS

09-15-2004, 20:38	#12 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	it does but wut im trying to say is that if u erase the flash with Twister, it doesnt erase the imei number, only wen u change the UEM do u have to rebuild the imei.