Are you looking for best Universal Box? We have it!

[Xak]

Universal Development Kit v3.0 - Next generation of proffesional Universal Box



UDK v3.0 is the newest equipment for the service centers, represents completely updated complete set already before a known product in the market under name UDK v2.5

Main Features:

• Based on Max3232, this is very important for new phones
• Dejan LPT interface (for flashing DCT3 Nokia phones) included in BOX
• Can take power from RS232 port or external power or phone
• RS232 Level Indicator for see how software communicate with the phone
• Smart Power System 3v/5v auto switching, 5V test voltage for flashing
• Low power/LPT power/3v-5v power/module power/FBus mode/MBus mode indicator
• Terminator TDM v1.0 like module built-in BOX, IrDa module in set, JIG Box built-in
• USB port type A on front side and USB port type B on back side of BOX

Dimension:

• 10 x 10 x 2.5cm

Weight:

• Full set about 2.5kg

Package contains:

• Universal Development Interface - UDI v3.0
• Universal Programming Interface - UPI v2.5
• Universal SIM Interface - USI v1.7
• Terminator Dongle Module - TDM v1.0
• Cables for connecting GSM Phones to UDI v3.0 (78 pcs)
• Cables for connecting UDI v3.0 to PC
• Cable for connecting UPI v2.5 and USI v1.7 to UDI v3.0

Supports following phones:

• Nokia 1100, 1610, 1611, 3110, 8110, 8148, 3200, 3210, 3300, 3310, 3315, 3330, 3410, 3320, 3510, 3650, 5100, 5510, 6100, 5110, 5120, 5130, 5190, 6110, 6130, 6150, 6150e, 6190, 6210, 6250, 6310, 7110, 2100, 5210, 8210, 8250, 8850, 6600, 6650, 6610, 7210, 6800, 6820, 7650, 8310, 6510, 8910, 9110, 9210, N-Gage, DKU, POP-Port
• Sagem 515, 612, 615, 712, 715, 725, 730, 750, 820, 830, 835 FM, 8300, 912, 922, 929, 932, 939, MY-X3, MY-X5, MY-C2
• Panasonic G450, G500, G520, G600, GD30, GD50, GD70, GD90, GD35, GD52, GD67, GD92, GD93, GD95, GD55
• Sony CMD-CD5, J5, J6, J70
• Bosch 508, 509, 512, 607, 608, 718, 738, 908, 909, 909s, 912
• Motorola V60,V66, V70, T205, T2688, T191
• Ericsson 388, 337, 318, 218, 628, 688, 768, 788, 868, 888, A1018s, T10, T10s, T18s, T28s, R250, R320, A2618s, A2628s, T20, T20s, T29, R520, T39, T65, T68, T68i, T200, T300, R600
• Siemens S6, S8, S10, S11, S15, C25, C28, S25, S35i, C35i, M35i, A35, A36, SL45, MT50, A50, S30, C30, S40, C55, S55, ST55
• Philips Savvy, Fisio, Xenium, Azalis
• Alcatel DB, 3XX, 5XX, 7XX, OT511, OT311, OT310, OT525, OT715, OT535, OT320, OT531
• Mitsubishi Trium Geo, Galaxy, Astral, Trium Aria, Aria W@P, Trium Mars, Mars W@P, M330, M320, M322I, 110
• Samsung SGH600, 2100, 2400, N100, SGH2200, A100, A300, N400, R2XX, A200, C100, S100
• Sendo S200
• LG LG510, LG600, LG B1200
• Sharp GX10

Equipped with Universal Programmer Interface, Sim Reader/Writer Interface and Terminator Dongle Module.

****************************************

Universal Programmer Interface



UPI - additional interface to UDK for programming EEPROM I2C, SPI, MICROWIRE, MICROCHIP PIC and ATMEL AVR controllers with special software IC-Prog or Pony Prog

Main Features:

• Can program 24xx eeproms
• Can program 25xxx eeproms
• Can program 93xx eeproms
• Can program 59xx eeproms
• Can program Pic 8 pin
• Can program Pic 18 pin
• Can program Pic 28 and 40 pin *
• Can program Atmel Avr 8 pin
• Can program Atmel Avr 20, 28, 32, 40, 44, 64 pin *
• 3v/5v switch for programming chips as at a supply voltage 5v and 3v
• Additional Led for see how going programming Pic controllers
• Additional connector for incircuit programming

* Only is in-circuit or through an additional IC socket

****************************************

Sim Reader/Writer Interface



USI - additional interface to UDK intended for operation with GSM SIM CARDS, PRE-PAY PHONE CARDS, SAT-TV CARDS, clone SIM Cards

Main Features:

• Compatibility with PHOENIX / SMART MOUSE / DEJAN SIM SCAN / JDM Programmer
• Reading from GSM SIM CARDS IMSI, KI codes and write them in a clone SIM-CARD
• Reading and writing Phonebook and some parameters GSM SIM CARDS.
• Possibility to program PIC processor inside in a CLONE SIM CARDS (JDM Mode).
• Possibility to use different frequencies (14.318 Mhz, 7.159 Mhz, 3.579 Mhz) at reading SIM CARDS
• Possibility of installation of additional quartz on user frequency.
• LED indicating a condition SIM RESET, in a mode of programming PIC indicating presence of voltage 13V in on an input MCLR of the processor PIC
• External SIM Connector

****************************************

Terminator Dongle Module



TDM - additional interface to UDK intended for operation with Ericsson and and SonyEricsson handsets

Main Features:

• Supports A2218, A2618, A2628, A3618, P800, P802, P900, R520, R600, T20, T29, T39, T100, T102, T200, T202, T216, T230, T300, T302, T310(c), T65, T68(i), T610, T620, T630, Z600
• Removes simlock from all cellphones without need to enter codes from keyboard
• Read all locks codes from phone if you need to unlock it in future by keyboard (reading all NCK, SPCK, NSCK or CCK)
• Removes all locks even if counter is 0
• Make backup od GDFS
• Change IMEI
• Reflash totaly dead phones and empty boards
• Allows to flash any Asian/Chineese phones into European version
• Reset security code to 0000

Download user's manual at http://xak.pp.ru/files/UDK_User_Manual.zip

Visit us - http://xak.pp.ru