post me your problem - Page 51 - GSM-Forum

BoomBoy · 03-16-2006, 18:25

Quote:

Originally Posted by _iskor_

what is ur problem.im also using blusolei bluetooth and i have no probling using it.

Then i install the following software and have installed the Dongle, and open the program (software prog....) it's comes up with a box that tells the program had vault, and then close..

fanbang · 03-16-2006, 22:19

k750i, when power on. only keypad lights come on. no lights on lcd. tried with a working lcd and flashed phone already still same. must be a hardware problem. any help would be greatly appriciated.
thanks

sorry wrong section.

nolyboy · 03-17-2006, 01:05

Quote:

Originally Posted by BoomBoy

Then i install the following software and have installed the Dongle, and open the program (software prog....) it's comes up with a box that tells the program had vault, and then close..

uninstall it then restart ur pc install it again the bt solei but donot put the bt wait it to finish then restart pc b4 putting the bt module

nolyboy · 03-17-2006, 01:07

Quote:

Originally Posted by fanbang

k750i, when power on. only keypad lights come on. no lights on lcd. tried with a working lcd and flashed phone already still same. must be a hardware problem. any help would be greatly appriciated.
thanks

sorry wrong section.

no its ok to post here i think lcd driver is the problem try re heating it or replace

nolyboy · 03-17-2006, 01:08

Quote:

Originally Posted by Mahzin

hi all..

my nk3100 cannot on after changing mjolner ic. i just wanna know whether it is compulsory to rerun the software everytime after we change that ic.

tq.

nope maybe u replace it with dead jolner replace it again no need to flash

bboyredcel · 03-17-2006, 01:10

I have a 6230b and a 6230i... I was wondering if i can somehow mess with the RF or something to allow the 6230i to accept 850/1800/1900 so that it will work better in the US? Is there anyway to reflash the 6230i to accept 850? or change some hardware? I'll do any steps necessary cuz i am interested in learning how to do this and getting my 6230i up and running full steam here in the US...

I have the 6230i that does not get very good reception around my area, the towers local to me are 850 for the most part... I also have a 6230b which gets rediculously good reception around me, how do i go about converting the 6230i to support the 850 frequency?

any and all help is much appreciated!

goffaman · 03-17-2006, 04:02

Quote:

Originally Posted by jerieves

can u give customization file for k750i?

waht software are you using?? SE TOOL? CRUISER? HWK

?

sjeet73 · 03-17-2006, 07:17

I have a nokia 6101 but the problem is that the memory is too low.How can I increase the memory.Pls help me.

fanbang · 03-17-2006, 13:20

Quote:

Originally Posted by nolyboy

no its ok to post here i think lcd driver is the problem try re heating it or replace

thanks for replying. received a w800 with same problem today.
have you got a picture of where is LCD driver is?
thanks again

Mahzin · 03-17-2006, 19:18

Quote:

Originally Posted by nolyboy

nope maybe u replace it with dead jolner replace it again no need to flash

Thanks bro.. i will try it...

goffaman · 03-18-2006, 07:38

Quote:

Originally Posted by sjeet73

I have a nokia 6101 but the problem is that the memory is too low.How can I increase the memory.Pls help me.

memory is fixed..

too bad

Moldovanus · 03-18-2006, 09:11

I have a SX1. I have done a phone format using the *#7370# code and now the phone won't start with my memory card inside:it says "Aplication closed:Phone" and "contact retailler". if i remove the memory card, the phone starts normally. but when i insert my memory card it says "App.closed AppArcServerThread". this error appears over and over again, blocking my phone. please help

uGaBuLa · 03-18-2006, 10:42

Hello.

Bought 6680, supposed to be working ok with Movist**.

When I got it, the phone shows always no net signal and can't make or receive calls. Changed the sim, tryed other's sim, but nothing.

But the phone is able to connect to internet via Movist** (download files an so on) and then shows net signal full.

How can it be?

Would apreciate any info.

maximus great · 03-18-2006, 11:34

i have a 6230 that power on and can make call and received call but the lcd and the keypad led doesn't light up any solutions?

maximus great · 03-18-2006, 11:36

there is another problem with my 6230i without any receptions any idea?

03-17-2006, 07:17	#758 (permalink)
sjeet73 Junior Member Join Date: Nov 2005 Posts: 5 Member: 197891 Status: Offline Thanks: 1 Thanked 1 Time in 1 Post	6101 I have a nokia 6101 but the problem is that the memory is too low.How can I increase the memory.Pls help me.

03-18-2006, 10:42	#763 (permalink)
uGaBuLa Junior Member Join Date: Nov 2005 Posts: 20 Member: 203979 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Net Signal. Hello. Bought 6680, supposed to be working ok with Movist. When I got it, the phone shows always no net signal and can't make or receive calls. Changed the sim, tryed other's sim, but nothing. But the phone is able to connect to internet via Movist (download files an so on) and then shows net signal full. How can it be? Would apreciate any info.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
post me your problem in motorola and let me give you the rite solution	greeni222000	Motorola Hardware Repair Section	2047	03-02-2013 11:57
!!!!post Me Your Hardware Problem!!!!	Ustad rajab.Com	Nokia Hardware & Hardware-Repair Area	32	01-18-2013 07:37
Post me your BB5 problem here.. Ill try to help with Pict	ichal_spy	Nokia Hardware & Hardware-Repair Area	10	11-15-2012 10:43
post me your all 6600 problem	tommobil2005	Nokia Repair Guide and FAQ	460	01-17-2011 11:23

03-16-2006, 22:19	#752 (permalink)
fanbang No Life Poster Join Date: Jul 2004 Location: out there Posts: 924 Member: 73674 Status: Offline Thanks: 163 Thanked 81 Times in 49 Posts	k750i, when power on. only keypad lights come on. no lights on lcd. tried with a working lcd and flashed phone already still same. must be a hardware problem. any help would be greatly appriciated. thanks sorry wrong section.

03-17-2006, 01:10	#756 (permalink)
bboyredcel Junior Member Join Date: Mar 2006 Location: New York Posts: 10 Member: 245475 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I have a 6230b and a 6230i... I was wondering if i can somehow mess with the RF or something to allow the 6230i to accept 850/1800/1900 so that it will work better in the US? Is there anyway to reflash the 6230i to accept 850? or change some hardware? I'll do any steps necessary cuz i am interested in learning how to do this and getting my 6230i up and running full steam here in the US... I have the 6230i that does not get very good reception around my area, the towers local to me are 850 for the most part... I also have a 6230b which gets rediculously good reception around me, how do i go about converting the 6230i to support the 850 frequency? any and all help is much appreciated!

03-18-2006, 09:11	#762 (permalink)
Moldovanus Junior Member Join Date: Nov 2005 Posts: 25 Member: 203124 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I have a SX1. I have done a phone format using the *#7370# code and now the phone won't start with my memory card inside:it says "Aplication closed:Phone" and "contact retailler". if i remove the memory card, the phone starts normally. but when i insert my memory card it says "App.closed AppArcServerThread". this error appears over and over again, blocking my phone. please help

03-18-2006, 11:34	#764 (permalink)
maximus great Insane Poster Join Date: Mar 2006 Location: in front of computer Posts: 61 Member: 241915 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	i have a 6230 that power on and can make call and received call but the lcd and the keypad led doesn't light up any solutions?

03-18-2006, 11:36	#765 (permalink)
maximus great Insane Poster Join Date: Mar 2006 Location: in front of computer Posts: 61 Member: 241915 Status: Offline Thanks: 0 Thanked 3 Times in 3 Posts	there is another problem with my 6230i without any receptions any idea?