..::Solve Your "NOKIA" Problem Within 24 Hours::.. - Page 104 - GSM-Forum

borisz1985 · 02-17-2009, 14:40

nokia 6151 no keypad light

gants · 02-18-2009, 04:57

2630 auto off (water damage) ... help

--------------------------------------------------------------------------------

phone auto off itself when time setting appear on screen, is it hardware problem ? please help me .tq

asmafatima2005 · 02-18-2009, 11:18

Hello,
i am having nokia 6600 recently i added some software(interactive voice call recorder) & when tried to delete from manager..its showing
Installer
Memory Full
Please close some applications & then try again.

even many times i switched off my phone & tried..its just waste
my mobile phone is having lot of free space(in phone memory & memory card) but then this message comes out whenever i tried to delete an application.
even i removed everything from the Gallery....but also waste
this is the biggest headache i am going through now a days & infact through my mobile i cant even send a sms to anyone as it is not working & cant even add a contact as it is also not working..only numbers works...no alphabets.
do reply me soon
thanks.

easwar.9158 · 02-18-2009, 12:40

how to 1600 rebuilt imei by jaf users full details please

K V Reddy · 02-18-2009, 14:23

I have a nokia 1650 with the problem,

when i go try to open ringtone the set eill become switch 0ff.

please help me

shresthasandy · 02-18-2009, 14:46

Hello friend,,,,, I got e90 mic problem.... can you advice how to reslove this by hardware? I would really appreciate your effort.... anticipating your quick reply.

MOEEZALI · 02-19-2009, 03:58

HELLO I HAVE 1200 1208 i flash all ver but not respons on jaf after falsh phone did not show local or test mode these set r made in india did u tell me how i solve these problem

MOEEZALI · 02-19-2009, 04:00

after flash they show contact servic
PLZ HELP ME

mariosraptor · 02-19-2009, 12:56

Hi. I have a 5140 that is always stuck on vibra. I have changed the vibra still the same. Thank you.

tcdxb · 02-19-2009, 14:45

st_cdsp_rf_bb_if_test------------fail
st_cdsp_rf_supply_test----------fail
st_cdsp_tx_iq_test---------------fail
st_cdsp_txc_data_test-----------------fail
st_cdsp_pwd_detector_bias_test------fail
st_cdsp_rx_pll_phase_lock-test------fail
st_cdsp_tx_pll_phase_lock_test------fail
st_cdsp_wcdma_tx_power_test-------fail
st_cdsp_rx_iq_loop_back_test--------fail
st_cdsp_gsm_tx_power_test-----------fail

i have 6120c but i cannot connect to sx4 auth to write pm. what is the posible solution for this?

rajeeshnokia · 02-20-2009, 07:13

sir nokia 3500c ear volume is very low .speaker ok...pls help

asifad · 02-20-2009, 08:46

dear all ub team salam on u .dear i have 1 prob in 6300 contact service plz help me .

i am also flash with ufsx.mt box.jaf.and ub box. i am sending ub logs to u plz chack it and then find my prob.thanks to all team.

6300 contact service

MCU Nokia Version: 1.126, and up to date.
SMCU Nokia Version: 1.42, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm217__07.21.mcusw 14 828 kB
Speed: [3250k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0103192101001101, 010C192101001101]
Input power: 14.00V OK.
Output power at Line1 3.93V is in range of: 4.00V ±10.0%
Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB
Version: 1.20.2
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 2
Flash ID 1: 0001002F - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x020000
Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000
Signature: 00000000000000000000000000000000
Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB
Version: 1.12.5
Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000352
Public ID: 1F10020BB7676D56D5B1F5E7563FBB77135945FC
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecHash: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Erase time: 1:35,5 sec.
Writing flash...
After MCU Flash Delay: 5000 msec.
Flashing file:
BB5 [BB5 ALGORITHM] UCP File: rm217__07.21.image_mea4 3 460 kB
Speed: [3250k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0103192101001101, 010C192101001101]
Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB
Version: 1.20.2
Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Max Flash Devices: 2
Flash ID 1: 0001002F - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x020000
Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000
Signature: 00000000000000000000000000000000
Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB
Version: 1.12.5
Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002]
Asic ID: 000000010000022600010006010C192101001101
EM Asic ID: 00000232
EM Asic ID: 00000352
Public ID: 1F10020BB7676D56D5B1F5E7563FBB77135945FC
Asic Mode ID: 00
Hash: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecHash: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
Converting UCP block to 128k
--------------------------------------------------------------------------------
TBB5FlashPhoneThread 2.7.0.1948 finished at: 2009/02/19 21:41:12

Terminated with error: 000100A6.000100AE.000100B8.0001116E.00011188.00011 5E4
MCU Boot Version: 1.069, and up to date.

kalindi · 02-21-2009, 12:48

Hi i hv nokia 5610,when i connect headset for using fm phone will restart, i did flesh with latest firmwere but still problam is there.

nish8822 · 02-21-2009, 12:58

hi sir can u help me i am using ufs setup 3.3.000 now i want the latest version of ufs setup which also work with ufs3 or work for 1650,2626 etc new models

sanjayvikas · 02-21-2009, 13:00

i have problem in 6280 it gives disturbance in both mic as well as speake

02-17-2009, 14:40	#1546 (permalink)
borisz1985 Junior Member Join Date: Jan 2008 Location: igen Posts: 30 Member: 669908 Status: Offline Thanks Meter: 3	nokia 6151 no keypad light nokia 6151 no keypad light

02-18-2009, 14:23	#1550 (permalink)
K V Reddy Junior Member Join Date: Feb 2009 Posts: 4 Member: 962881 Status: Offline Thanks Meter: 2	1650 ringer oroblem I have a nokia 1650 with the problem, when i go try to open ringtone the set eill become switch 0ff. please help me

02-19-2009, 12:56	#1554 (permalink)
mariosraptor Major Poster Join Date: Sep 2006 Posts: 42 Member: 355512 Status: Offline Thanks Meter: 3	5140 vibra Hi. I have a 5140 that is always stuck on vibra. I have changed the vibra still the same. Thank you.

02-19-2009, 14:45	#1555 (permalink)
tcdxb Freak Poster Join Date: Jul 2006 Location: UAE Posts: 271 Member: 314698 Status: Offline Thanks Meter: 47	6120 cannot Write pm st_cdsp_rf_bb_if_test------------fail st_cdsp_rf_supply_test----------fail st_cdsp_tx_iq_test---------------fail st_cdsp_txc_data_test-----------------fail st_cdsp_pwd_detector_bias_test------fail st_cdsp_rx_pll_phase_lock-test------fail st_cdsp_tx_pll_phase_lock_test------fail st_cdsp_wcdma_tx_power_test-------fail st_cdsp_rx_iq_loop_back_test--------fail st_cdsp_gsm_tx_power_test-----------fail i have 6120c but i cannot connect to sx4 auth to write pm. what is the posible solution for this?

02-20-2009, 08:46	#1557 (permalink)
asifad Junior Member Join Date: Sep 2008 Posts: 4 Member: 863286 Status: Offline Thanks Meter: 0	6300 contact service dear all ub team salam on u .dear i have 1 prob in 6300 contact service plz help me . i am also flash with ufsx.mt box.jaf.and ub box. i am sending ub logs to u plz chack it and then find my prob.thanks to all team. 6300 contact service MCU Nokia Version: 1.126, and up to date. SMCU Nokia Version: 1.42, and up to date. Flashing file: BB5 [BB5 ALGORITHM] MCU File: rm217__07.21.mcusw 14 828 kB Speed: [3250k, 6500k, 6500k, 98k] Baud. Supported Hardwares: [0103192101001101, 010C192101001101] Input power: 14.00V OK. Output power at Line1 3.93V is in range of: 4.00V ±10.0% Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB Version: 1.20.2 Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002] Max Flash Devices: 2 Flash ID 1: 0001002F - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x020000 Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000 Signature: 00000000000000000000000000000000 Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB Version: 1.12.5 Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002] Asic ID: 000000010000022600010006010C192101001101 EM Asic ID: 00000232 EM Asic ID: 00000352 Public ID: 1F10020BB7676D56D5B1F5E7563FBB77135945FC Asic Mode ID: 00 Hash: BAF3A9C3DBFA8454937DB77F2B8852B1 ROM ID: 191EC665DFAAF68F SecHash: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9 Erase time: 1:35,5 sec. Writing flash... After MCU Flash Delay: 5000 msec. Flashing file: BB5 [BB5 ALGORITHM] UCP File: rm217__07.21.image_mea4 3 460 kB Speed: [3250k, 6500k, 6500k, 98k] Baud. Supported Hardwares: [0103192101001101, 010C192101001101] Boot Loader: RAP3Gv3_2nd_fps8.fg 15 kB Version: 1.20.2 Supported Hardwares: [0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002] Max Flash Devices: 2 Flash ID 1: 0001002F - 0000 Rev: 6921 Manufacturer: AMD MSB: 00 SectorSize: 0x020000 Flash ID 2: FFFF0000 - 0000 Rev: 0000 Manufacturer: Unknown MSB: 00 SectorSize: 0x010000 Signature: 00000000000000000000000000000000 Flash Loader: RAP3Gv3_algo_fps8.fg 63 kB Version: 1.12.5 Supported Hardwares: [0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002] Asic ID: 000000010000022600010006010C192101001101 EM Asic ID: 00000232 EM Asic ID: 00000352 Public ID: 1F10020BB7676D56D5B1F5E7563FBB77135945FC Asic Mode ID: 00 Hash: BAF3A9C3DBFA8454937DB77F2B8852B1 ROM ID: 191EC665DFAAF68F SecHash: 7F7E6491E8D30494B45630BB3A8599F4E1C674C9 Converting UCP block to 128k -------------------------------------------------------------------------------- TBB5FlashPhoneThread 2.7.0.1948 finished at: 2009/02/19 21:41:12 Terminated with error: 000100A6.000100AE.000100B8.0001116E.00011188.00011 5E4 MCU Boot Version: 1.069, and up to date.

02-18-2009, 04:57	#1547 (permalink)
gants Crazy Poster Join Date: Mar 2003 Location: malaysia Posts: 56 Member: 23961 Status: Offline Thanks Meter: 14	2630 auto off (water damage) ... help -------------------------------------------------------------------------------- phone auto off itself when time setting appear on screen, is it hardware problem ? please help me .tq

02-18-2009, 11:18	#1548 (permalink)
asmafatima2005 Junior Member Join Date: Oct 2008 Posts: 8 Member: 884041 Status: Offline Sonork: asmafatima2005 Thanks Meter: 0	Hello, i am having nokia 6600 recently i added some software(interactive voice call recorder) & when tried to delete from manager..its showing Installer Memory Full Please close some applications & then try again. even many times i switched off my phone & tried..its just waste my mobile phone is having lot of free space(in phone memory & memory card) but then this message comes out whenever i tried to delete an application. even i removed everything from the Gallery....but also waste this is the biggest headache i am going through now a days & infact through my mobile i cant even send a sms to anyone as it is not working & cant even add a contact as it is also not working..only numbers works...no alphabets. do reply me soon thanks.

02-18-2009, 12:40	#1549 (permalink)
easwar.9158 Insane Poster Join Date: Jul 2008 Location: India;Visakhapatnam Posts: 81 Member: 805201 Status: Offline Sonork: DB88-6CEF Thanks Meter: 8	how to 1600 rebuilt imei by jaf users full details please

02-18-2009, 14:46	#1551 (permalink)
shresthasandy Junior Member Join Date: Aug 2005 Location: Kathmandu, Nepal Age: 47 Posts: 17 Member: 169264 Status: Offline Sonork: 100.1670869 Thanks Meter: 0	Hello friend,,,,, I got e90 mic problem.... can you advice how to reslove this by hardware? I would really appreciate your effort.... anticipating your quick reply.

02-19-2009, 03:58	#1552 (permalink)
MOEEZALI Freak Poster Join Date: Oct 2006 Posts: 442 Member: 381846 Status: Offline Sonork: 123.786786 Thanks Meter: 54	HELLO I HAVE 1200 1208 i flash all ver but not respons on jaf after falsh phone did not show local or test mode these set r made in india did u tell me how i solve these problem

02-19-2009, 04:00	#1553 (permalink)
MOEEZALI Freak Poster Join Date: Oct 2006 Posts: 442 Member: 381846 Status: Offline Sonork: 123.786786 Thanks Meter: 54	after flash they show contact servic PLZ HELP ME

02-20-2009, 07:13	#1556 (permalink)
rajeeshnokia Major Poster Join Date: Dec 2007 Location: cochin Age: 45 Posts: 49 Member: 667112 Status: Offline Thanks Meter: 8	sir nokia 3500c ear volume is very low .speaker ok...pls help

02-21-2009, 12:48	#1558 (permalink)
kalindi Freak Poster Join Date: Jul 2007 Posts: 184 Member: 549049 Status: Offline Thanks Meter: 4	Hi i hv nokia 5610,when i connect headset for using fm phone will restart, i did flesh with latest firmwere but still problam is there.

02-21-2009, 12:58	#1559 (permalink)
nish8822 Junior Member Join Date: Dec 2008 Location: panipat Posts: 32 Member: 931817 Status: Offline Sonork: prashant Thanks Meter: 1	hi sir can u help me i am using ufs setup 3.3.000 now i want the latest version of ufs setup which also work with ufs3 or work for 1650,2626 etc new models

02-21-2009, 13:00	#1560 (permalink)
sanjayvikas Banned Join Date: Sep 2008 Location: in ur dreams Posts: 791 Member: 867442 Status: Offline Sonork: 100.1602740 Thanks Meter: 143	i have problem in 6280 it gives disturbance in both mic as well as speake

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solving Your CDMA Problem Within 24 hours	kapil2007chakde	Various CDMA/TDMA Cell Phones	770	04-20-2017 22:20
..::solve Your Problem Within 24 Hours::..	RIZWANJAT	Nokia Hardware & Hardware Repair	16	02-03-2013 08:50