How to unlock E250v using UFS - GSM-Forum

pietpiraat · 04-29-2007, 13:37

Connect youre UFS TWISTER BOX

press connect

after youre box is connecting press OM/swift and take model E250

connect cable (D800)

connect Mobile phone (E250) with battery inside (take fully charged battery always better)

on the screen will be battery charging

do not turn on !!!!

and press in the menu UNLOCK 2 EP

UFS is now booting swift (i using baudrate 115200)

this takes a few minutes (4 minutes) (take a break, get some coffee

)

in youre box you will see

Preloader Ok, 115200 Baud
Flashloader Ok
FLASH Id: 00EC2206000100010014, Samsung KAP29VG00M

then you get in youre box this
MCU Read Done, 2359296 byte(s), Time: 3:55, 0
E2P Info:
IMEI: x5x4x3-01-x07xx3-7
SIMLOCK STATUS: 01
MCC-MNC: 000-000
#SIMLOCK*NET*45xxxx60#

then you must save this (save in read)

and then the UFS box will asked you

ARE YOU SURE TO REMOVE SIMLOCK FLAGS !!!!

PRESS YES

then the box will say Writing MCU flash memory

and after this you will see on youre screen

C:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E250_353463-01-207324-6_E2P.bin
File CRC: 0xFCACA381
MCU Write Done, 786432 byte(s), Time: 1:11

and now is Phone Unlocked !!!!!!!

pietpiraat · 04-29-2007, 14:02

I hope i could help

greetings from BELGIUM !!!!

Please Wait ...
UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1
UFS_USB V2.6 (c) SarasSoft 2005., S/n: xxxxx
HID: 032E3Exxxxxxxxxx
HWK: A1.04-PRO1
Licence: True
Loaded Settings from: Sams.ini
Preloader Ok, 115200 Baud
Flashloader Ok
FLASH Id: 00EC2206000100010014, Samsung KAP29VG00M
MCU Read Done, 2359296 byte(s), Time: 3:49, 0
E2P Info:
IMEI: 35xxxx-01-xxxxxx-3
SIMLOCK STATUS: 01
MCC-MNC: 000-000
#SIMLOCK*NET*80888780#
C:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E250_35xxxx-01-xxxxxx-3_E2P.bin
File CRC: 0xBFEEFE92
MCU Write Done, 786432 byte(s), Time: 1:11

Unlock is ready !!!!!

IkaMazini · 04-30-2007, 09:12

this procedure working in cracked 3.0.3 suite?

pietpiraat · 05-01-2007, 08:59

hello,

i really dont know i am using 2.0.4 version off UFS it is the brand new i believe.

but sorry i am using original version off UFS i dont have a cracked one.

BUT WHY DONT YOU TRY IT ????

mobilom · 05-01-2007, 09:17

it work just with 2.0.4.2 with original hwk not cracked one tested 100%

adnanshahzad · 06-05-2007, 14:52

thanks very much this is perfect

bowei · 06-07-2007, 11:49

Quote:

Originally Posted by pietpiraat

Connect youre UFS TWISTER BOX

press connect

after youre box is connecting press OM/swift and take model E250

connect cable (D800)

connect Mobile phone (E250) with battery inside (take fully charged battery always better)

on the screen will be battery charging

do not turn on !!!!

and press in the menu UNLOCK 2 EP

UFS is now booting swift (i using baudrate 115200)

this takes a few minutes (4 minutes) (take a break, get some coffee

)

in youre box you will see

Preloader Ok, 115200 Baud
Flashloader Ok
FLASH Id: 00EC2206000100010014, Samsung KAP29VG00M

then you get in youre box this
MCU Read Done, 2359296 byte(s), Time: 3:55, 0
E2P Info:
IMEI: x5x4x3-01-x07xx3-7
SIMLOCK STATUS: 01
MCC-MNC: 000-000
#SIMLOCK*NET*45xxxx60#

then you must save this (save in read)

and then the UFS box will asked you

ARE YOU SURE TO REMOVE SIMLOCK FLAGS !!!!

PRESS YES

then the box will say Writing MCU flash memory

and after this you will see on youre screen

C:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E250_353463-01-207324-6_E2P.bin
File CRC: 0xFCACA381
MCU Write Done, 786432 byte(s), Time: 1:11

and now is Phone Unlocked !!!!!!!

How do i go about this with version 2.0.3

aleshek · 06-11-2007, 11:34

UNLOCK E2P button don't work for me, i have ver. 3.0.5, can you help me pls?

BR

chris2007 · 08-13-2007, 22:10

cn this step of unlock cn solve the "phone lock"??????????????.....i try of the asking about the 'network' and it was good but this step of unlock ......but it is cn solve the 'phone lock'????????????????????????????????????

thnks
chris

colepipo · 09-20-2007, 11:07

Quote:

Originally Posted by pietpiraat

Connect youre UFS TWISTER BOX

press connect

after youre box is connecting press OM/swift and take model E250

connect cable (D800)

connect Mobile phone (E250) with battery inside (take fully charged battery always better)

on the screen will be battery charging

do not turn on !!!!

and press in the menu UNLOCK 2 EP

UFS is now booting swift (i using baudrate 115200)

this takes a few minutes (4 minutes) (take a break, get some coffee

)

in youre box you will see

Preloader Ok, 115200 Baud
Flashloader Ok
FLASH Id: 00EC2206000100010014, Samsung KAP29VG00M

then you get in youre box this
MCU Read Done, 2359296 byte(s), Time: 3:55, 0
E2P Info:
IMEI: x5x4x3-01-x07xx3-7
SIMLOCK STATUS: 01
MCC-MNC: 000-000
#SIMLOCK*NET*45xxxx60#

then you must save this (save in read)

and then the UFS box will asked you

ARE YOU SURE TO REMOVE SIMLOCK FLAGS !!!!

PRESS YES

then the box will say Writing MCU flash memory

and after this you will see on youre screen

C:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E250_353463-01-207324-6_E2P.bin
File CRC: 0xFCACA381
MCU Write Done, 786432 byte(s), Time: 1:11

and now is Phone Unlocked !!!!!!!

There is no E250 in UFS list of phones to select. Please make corrections where necesary.

jenson · 12-17-2007, 07:41

hi guys i hav problem to unlock E250v...i can follow ur instruction but i hav one problem that is UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1 10
UFS_USB V2.8 (c) SarasSoft 2007., S/n: 78297
HID: 7FE1B63F0027004C
HWK: A1.04-PRO1
Licence: True
Loaded Settings from: Sams.ini
Preloader Ok, 115200 Baud
Flashloader Ok
FLASH Id: 00EC2206000100000014, Samsung KAP29VG00M
MCU Read Done, 2359296 byte(s), Time: 03:57, 0
E2P Info:
IMEI: 356075-01-315315-2
SIMLOCK STATUS: 00
MCC-MNC: 000-000
E2P Saved as D:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E250_356075-01-315315-2_E2P.bin
Preloader Ok, 115200 Baud
Flashloader Ok
FLASH Id: 00EC2206000100000014, Samsung KAP29VG00M

Sim lock status is 00 but in ur instruction there is 01. Show how can i unlock or simlock 01??????? plz help me its urgent....

thanks 4 advance.........

lusomaco · 12-29-2007, 21:34

not work for me
UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1 10
UFS_USB V2.8 (c) SarasSoft 2007., S/n: 4273
HID: 31EE044B00270002
HWK: A1.04-PRO1
Licence: True
Loaded Settings from: Sams.ini
1st Boot Failed: Power-Up
1st Boot Failed: Power-Up
1st Boot Failed: Power-Up

Black_Daimond · 07-14-2008, 17:02

Quote:

Originally Posted by lusomaco

not work for me
UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1 10
UFS_USB V2.8 (c) SarasSoft 2007., S/n: 4273
HID: 31EE044B00270002
HWK: A1.04-PRO1
Licence: True
Loaded Settings from: Sams.ini
1st Boot Failed: Power-Up
1st Boot Failed: Power-Up
1st Boot Failed: Power-Up

I have same problem. Not working for me.

Sandino · 07-31-2008, 16:42

if SIMLOCK STATUS: 00 then unlock as E200.

04-29-2007, 13:37	#1 (permalink)
pietpiraat Freak Poster Join Date: Dec 2005 Location: neerpelt grote heide Belgium Age: 38 Posts: 110 Member: 212839 Status: Offline Thanks: 6 Thanked 10 Times in 6 Posts	How to unlock E250v using UFS Connect youre UFS TWISTER BOX press connect after youre box is connecting press OM/swift and take model E250 connect cable (D800) connect Mobile phone (E250) with battery inside (take fully charged battery always better) on the screen will be battery charging do not turn on !!!! and press in the menu UNLOCK 2 EP UFS is now booting swift (i using baudrate 115200) this takes a few minutes (4 minutes) (take a break, get some coffee ) in youre box you will see Preloader Ok, 115200 Baud Flashloader Ok FLASH Id: 00EC2206000100010014, Samsung KAP29VG00M then you get in youre box this MCU Read Done, 2359296 byte(s), Time: 3:55, 0 E2P Info: IMEI: x5x4x3-01-x07xx3-7 SIMLOCK STATUS: 01 MCC-MNC: 000-000 #SIMLOCKNET45xxxx60# then you must save this (save in read) and then the UFS box will asked you ARE YOU SURE TO REMOVE SIMLOCK FLAGS !!!! PRESS YES then the box will say Writing MCU flash memory and after this you will see on youre screen C:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E250_353463-01-207324-6_E2P.bin File CRC: 0xFCACA381 MCU Write Done, 786432 byte(s), Time: 1:11 and now is Phone Unlocked !!!!!!!

04-29-2007, 14:02	#2 (permalink)
pietpiraat Freak Poster Join Date: Dec 2005 Location: neerpelt grote heide Belgium Age: 38 Posts: 110 Member: 212839 Status: Offline Thanks: 6 Thanked 10 Times in 6 Posts	Complete screen you will see on youre UFS Box I hope i could help greetings from BELGIUM !!!! Please Wait ... UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1 UFS_USB V2.6 (c) SarasSoft 2005., S/n: xxxxx HID: 032E3Exxxxxxxxxx HWK: A1.04-PRO1 Licence: True Loaded Settings from: Sams.ini Preloader Ok, 115200 Baud Flashloader Ok FLASH Id: 00EC2206000100010014, Samsung KAP29VG00M MCU Read Done, 2359296 byte(s), Time: 3:49, 0 E2P Info: IMEI: 35xxxx-01-xxxxxx-3 SIMLOCK STATUS: 01 MCC-MNC: 000-000 #SIMLOCKNET80888780# C:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E250_35xxxx-01-xxxxxx-3_E2P.bin File CRC: 0xBFEEFE92 MCU Write Done, 786432 byte(s), Time: 1:11 Unlock is ready !!!!!

05-01-2007, 08:59	#4 (permalink)
pietpiraat Freak Poster Join Date: Dec 2005 Location: neerpelt grote heide Belgium Age: 38 Posts: 110 Member: 212839 Status: Offline Thanks: 6 Thanked 10 Times in 6 Posts	Cracked version off ufs hello, i really dont know i am using 2.0.4 version off UFS it is the brand new i believe. but sorry i am using original version off UFS i dont have a cracked one. BUT WHY DONT YOU TRY IT ????

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
how to unlock t290I not ufs	smso	Sony Ericsson	3	10-04-2009 11:30
how to unlock e250v ?	irfan99	SWIFT Platform	7	06-29-2007 20:18
How To Unlock E250v	chhabria rajesh	UST Pro II	5	03-11-2007 22:11
how to flash 5300 using UFS	avroy7	UFS2 + UFS3-Tornadoflasher	6	02-14-2007 18:49
need instructions to unlock t610 using ufs	jab	UFS2 + UFS3-Tornadoflasher	2	12-07-2004 14:13

04-30-2007, 09:12	#3 (permalink)
IkaMazini No Life Poster Join Date: Jul 2005 Posts: 1,807 Member: 162473 Status: Offline Thanks: 48 Thanked 428 Times in 219 Posts	this procedure working in cracked 3.0.3 suite?

05-01-2007, 09:17	#5 (permalink)
mobilom Freak Poster Join Date: Oct 2005 Location: Algeria Posts: 164 Member: 190247 Status: Offline Thanks: 2 Thanked 4 Times in 4 Posts	it work just with 2.0.4.2 with original hwk not cracked one tested 100%

06-05-2007, 14:52	#6 (permalink)
adnanshahzad Freak Poster Join Date: Dec 2004 Location: UNITED KINGDOM Posts: 305 Member: 96918 Status: Offline Sonork: 100.1602725 Thanks: 17 Thanked 31 Times in 20 Posts	thanks very much this is perfect

06-11-2007, 11:34	#8 (permalink)
aleshek Freak Poster Join Date: Jan 2004 Location: czech rep. Posts: 224 Member: 49095 Status: Offline Thanks: 10 Thanked 7 Times in 7 Posts	UNLOCK E2P button don't work for me, i have ver. 3.0.5, can you help me pls? BR

08-13-2007, 22:10	#9 (permalink)
chris2007 No Life Poster Join Date: Feb 2007 Posts: 1,557 Member: 453916 Status: Offline Thanks: 178 Thanked 87 Times in 77 Posts	cn this step of unlock cn solve the "phone lock"??????????????.....i try of the asking about the 'network' and it was good but this step of unlock ......but it is cn solve the 'phone lock'???????????????????????????????????? thnks chris

12-17-2007, 07:41	#11 (permalink)
jenson Junior Member Join Date: Jun 2006 Posts: 5 Member: 286560 Status: Offline Thanks: 1 Thanked 1 Time in 1 Post	hi guys i hav problem to unlock E250v...i can follow ur instruction but i hav one problem that is UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1 10 UFS_USB V2.8 (c) SarasSoft 2007., S/n: 78297 HID: 7FE1B63F0027004C HWK: A1.04-PRO1 Licence: True Loaded Settings from: Sams.ini Preloader Ok, 115200 Baud Flashloader Ok FLASH Id: 00EC2206000100000014, Samsung KAP29VG00M MCU Read Done, 2359296 byte(s), Time: 03:57, 0 E2P Info: IMEI: 356075-01-315315-2 SIMLOCK STATUS: 00 MCC-MNC: 000-000 E2P Saved as D:\Program Files\SarasSoft\UFS\UFS_SAMs\Read\E250_356075-01-315315-2_E2P.bin Preloader Ok, 115200 Baud Flashloader Ok FLASH Id: 00EC2206000100000014, Samsung KAP29VG00M Sim lock status is 00 but in ur instruction there is 01. Show how can i unlock or simlock 01??????? plz help me its urgent.... thanks 4 advance.........

12-29-2007, 21:34	#12 (permalink)
lusomaco Freak Poster Join Date: Jan 2006 Posts: 436 Member: 220414 Status: Offline Sonork: 100.1611916 Thanks: 102 Thanked 51 Times in 34 Posts	not work for me UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1 10 UFS_USB V2.8 (c) SarasSoft 2007., S/n: 4273 HID: 31EE044B00270002 HWK: A1.04-PRO1 Licence: True Loaded Settings from: Sams.ini 1st Boot Failed: Power-Up 1st Boot Failed: Power-Up 1st Boot Failed: Power-Up

07-31-2008, 16:42	#14 (permalink)
Sandino Freak Poster Join Date: Mar 2000 Location: Bulgaria Age: 44 Posts: 116 Member: 1128 Status: Offline Thanks: 9 Thanked 9 Times in 8 Posts	if SIMLOCK STATUS: 00 then unlock as E200.