zv10 dead after flash bad boot any solution? - GSM-Forum

ionutz808 · 04-29-2006, 09:35

I have a zv10 and after flash it was still in download mode but it's battery ran out just when it was suposed to reboot and say formating, after that even with a full battery it doesen't start(not with power button and not even with power button + 9 ). Does anybody have a zv10 flasher that doesen't require the phone to be powered on? If you do please pm me at [email protected]

elsokary · 04-30-2006, 07:38

if you have damege boot now you have die phone and you must be contact elco
if you have good boot try to flash again with full battery and the phone will be ok

BouRRi_GSM · 05-01-2006, 10:56

we need wait when TP or modified cable will be released, this what's Elco said

where are u Elco, still 3 month pass but nothing new

bro

Elco · 05-01-2006, 11:30

Solution will be redy soon. Is NOT a cable solution.

elsokary · 05-01-2006, 14:29

its not cable solution
what
is TP

ionutz808 · 05-01-2006, 20:25

Hi elco, i have nsdongle will you update it, or another solution?

tanim_1976 · 11-07-2006, 13:00

I think he Means Like JTAG (BOOT DAMAGE REPAIR)

dipu · 11-12-2006, 15:52

you must believe in Elco. if he says solution will be available then we must wait till he shows some lite on us. I better wait to repaird bad boot or flash phone by ns pro or TST. Just i said in other thread i have a z230 dead, cant connect the phone anymore, so I am gonna send it to Elco, probably. thanks Elco for responding.

NoName® · 11-12-2006, 17:33

There is inly one solution : flash bootcore with JTAG , or flash it on UP256 device but I not shure that it support flashng IC used in these phones.
all JTAG points accesible on board ;-) I think you see solution soon ;-)

b.r NoName®

DeDo Gsm1911 · 11-12-2006, 21:25

I think Mr-Elco there is no way repair this phone just send it to you man

so you can give ur adress for him

B.R
Ahmed

Elco · 11-12-2006, 21:34

Quote:

Originally Posted by NoName®

There is inly one solution : flash bootcore with JTAG , or flash it on UP256 device but I not shure that it support flashng IC used in these phones.
all JTAG points accesible on board ;-) I think you see solution soon ;-)

b.r NoName®

Yes.. will be very nice if anyone can make jtag to work with MSM6250. Flash chip is easy to handle. But not so easy to handle MSM6250 registers. So... till then, i have a complicated but 100% working solution by special prommer for this phones.

Anyway... the ideea is that Zxxx phones with dead boot can be repaired. For shipping details, PLZ contact me private on yahoo messenger.

dipu · 11-12-2006, 22:38

my yahoo address is [email protected], please send me further information how to send or pcb to you for reviving my z230 phone. Thank you elco

ghost9800 · 02-05-2007, 22:32

No solution , wait for new solution directly flash !!!

LordMen007 · 03-02-2007, 12:06

so mr Elco still waiting u r solution any news

NoName® · 03-29-2007, 17:54

Quote:

Originally Posted by Elco

Yes.. will be very nice if anyone can make jtag to work with MSM6250. Flash chip is easy to handle. But not so easy to handle MSM6250 registers. So... till then, i have a complicated but 100% working solution by special prommer for this phones.

Anyway... the ideea is that Zxxx phones with dead boot can be repaired. For shipping details, PLZ contact me private on yahoo messenger.

ARM registers are standart , maybe you mean peripherials in damn MSM_CPU
flash are CFI compilant so write it are not problem ;-)
Also there are test mode pins under CPU like MODE_* and BOOT_MODE , maybe they can help

04-29-2006, 09:35	#1 (permalink)
ionutz808 Major Poster Join Date: Jan 2004 Location: romania Age: 49 Posts: 45 Member: 48984 Status: Offline Thanks Meter: 1	zv10 dead after flash bad boot any solution? I have a zv10 and after flash it was still in download mode but it's battery ran out just when it was suposed to reboot and say formating, after that even with a full battery it doesen't start(not with power button and not even with power button + 9 ). Does anybody have a zv10 flasher that doesen't require the phone to be powered on? If you do please pm me at [email protected]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
w800c dead after flash with w800i any solution	patric	Cruiser Suite	5	02-17-2011 04:47
j700 dead after flash, bad flash file	KRIZA	UST Pro II	2	09-20-2009 14:48
sgh-zv10--dead after flash	SCORILLO	Samsung Hardware Repair	5	12-02-2008 12:07
ZV10 dead after flash - help :)	PSG	QUALCOMM Models (3G)	7	04-24-2006 23:00
Fizio 311 dead after flashing with Andro , any solution ?	kazak	Philips	6	09-08-2003 12:33

04-30-2006, 07:38	#2 (permalink)
elsokary No Life Poster Join Date: Jun 2003 Location: EGYPT Age: 44 Posts: 1,229 Member: 31027 Status: Offline Thanks Meter: 179	if you have damege boot now you have die phone and you must be contact elco if you have good boot try to flash again with full battery and the phone will be ok

05-01-2006, 10:56	#3 (permalink)
BouRRi_GSM Registered User Join Date: Jan 2005 Location: TuNiSiA Age: 43 Posts: 4,342 Member: 111457 Status: Offline Thanks Meter: 967	we need wait when TP or modified cable will be released, this what's Elco said where are u Elco, still 3 month pass but nothing new bro

05-01-2006, 11:30	#4 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	Solution will be redy soon. Is NOT a cable solution.

05-01-2006, 14:29	#5 (permalink)
elsokary No Life Poster Join Date: Jun 2003 Location: EGYPT Age: 44 Posts: 1,229 Member: 31027 Status: Offline Thanks Meter: 179	its not cable solution what is TP

05-01-2006, 20:25	#6 (permalink)
ionutz808 Major Poster Join Date: Jan 2004 Location: romania Age: 49 Posts: 45 Member: 48984 Status: Offline Thanks Meter: 1	Hi elco, i have nsdongle will you update it, or another solution?

11-07-2006, 13:00	#7 (permalink)
tanim_1976 Freak Poster Join Date: Dec 2002 Location: **land full of cheater Age: 48 Posts: 480 Member: 18948 Status: Offline** Thanks Meter: 53	I think he Means Like JTAG (BOOT DAMAGE REPAIR)

11-12-2006, 15:52	#8 (permalink)
dipu No Life Poster Join Date: Sep 2005 Location: manchester, uk Posts: 560 Member: 177730 Status: Offline Thanks Meter: 11	you must believe in Elco. if he says solution will be available then we must wait till he shows some lite on us. I better wait to repaird bad boot or flash phone by ns pro or TST. Just i said in other thread i have a z230 dead, cant connect the phone anymore, so I am gonna send it to Elco, probably. thanks Elco for responding.

11-12-2006, 17:33	#9 (permalink)
NoName® Product Supporter Join Date: Mar 2005 Location: China Posts: 3,338 Member: 129885 Status: Offline Sonork: 100:1603514 Thanks Meter: 6,202	There is inly one solution : flash bootcore with JTAG , or flash it on UP256 device but I not shure that it support flashng IC used in these phones. all JTAG points accesible on board ;-) I think you see solution soon ;-) b.r NoName®

11-12-2006, 21:25	#10 (permalink)
DeDo Gsm1911 No Life Poster Join Date: Feb 2004 Location: Egypt-Alex Age: 42 Posts: 555 Member: 56038 Status: Offline Thanks Meter: 171	I think Mr-Elco there is no way repair this phone just send it to you man so you can give ur adress for him B.R Ahmed

11-12-2006, 22:38	#12 (permalink)
dipu No Life Poster Join Date: Sep 2005 Location: manchester, uk Posts: 560 Member: 177730 Status: Offline Thanks Meter: 11	my yahoo address is [email protected], please send me further information how to send or pcb to you for reviving my z230 phone. Thank you elco

02-05-2007, 22:32	#13 (permalink)
ghost9800 Freak Poster Join Date: Apr 2003 Location: Internet Age: 50 Posts: 220 Member: 25914 Status: Offline Thanks Meter: 3	No solution , wait for new solution directly flash !!!

03-02-2007, 12:06	#14 (permalink)
LordMen007 No Life Poster Join Date: Jul 2005 Location: I'm back to business Posts: 1,981 Member: 184793 Status: Offline Sonork: 100.1574609 Thanks Meter: 45	so mr Elco still waiting u r solution any news