X5m - No sound but speaker is good - GSM-Forum

chrisro · 11-05-2005, 11:13

Hello!
I have sagem x5m with no sound but speaker is good but I have already changed speaker and problem still. Please help me with schematic.

Thanks!
Krzys

kingsphonz · 12-03-2005, 05:54

most sagem have dual functional speaker, one might be working while the other not, change the speaker

MAGICMOBILE · 01-06-2006, 19:51

remove the charge connector clean the pcb and test

vozice_09 · 01-08-2006, 18:22

or you can try old Chris utility named gaincontrol (change values in eeprom where are mic and speaker settings)

tc_ct · 03-03-2006, 13:53

I solve one myx5-2 with the same problem.I just backup the flash, and then reflash the phone using sws-sag with the same flash. Everything was ok at the end.Just try that and post result.
Regards.

dj_mseal · 03-08-2006, 22:27

not flash prob. just change charging connector and clean.

AlgMUR · 09-02-2006, 13:51

Quote:

Originally Posted by dj_mseal

not flash prob. just change charging connector and clean.

changing charge connector and speaker are not solution, i have a sagem X
-
with good charge connector, and good speaker but speaker not working

my be software problem

11-05-2005, 11:13	#1 (permalink)
chrisro Freak Poster Join Date: Aug 2001 Location: Gdynia, Poland Age: 46 Posts: 258 Member: 6060 Status: Offline Thanks Meter: 0	X5m - No sound but speaker is good Hello! I have sagem x5m with no sound but speaker is good but I have already changed speaker and problem still. Please help me with schematic. Thanks! Krzys

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N82 k18 no sound but all speaker are ok	kfkevin	Infinity-Box	0	06-30-2009 15:41
6230i: no buzzer sound but handfree is OK	PSG	Nokia Hardware & Hardware Repair	1	05-29-2007 10:11
nec e616 keypad tone ok but when making call no sound in speaker	HUM	NEC	6	05-15-2007 02:12
3210 and no sound ... but buzzer is OK	siewa26	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	09-05-2004 09:30
Sagem 922 no sound but noise on speaker	florinmar	Sagem Hardware Repair Area	5	08-11-2003 17:55

12-03-2005, 05:54	#2 (permalink)
kingsphonz Junior Member Join Date: Nov 2005 Posts: 38 Member: 203942 Status: Offline Thanks Meter: 0	most sagem have dual functional speaker, one might be working while the other not, change the speaker

01-06-2006, 19:51	#3 (permalink)
MAGICMOBILE Registered User Join Date: Dec 2005 Location: algeria-tiaret Posts: 139 Member: 213203 Status: Offline Thanks Meter: 5	remove the charge connector clean the pcb and test

01-08-2006, 18:22	#4 (permalink)
vozice_09 No Life Poster Join Date: Jul 2002 Location: Czech Republic Age: 45 Posts: 505 Member: 13439 Status: Offline Thanks Meter: 14	or you can try old Chris utility named gaincontrol (change values in eeprom where are mic and speaker settings)

03-03-2006, 13:53	#5 (permalink)
tc_ct Junior Member Join Date: Aug 2004 Location: galati,romania Age: 44 Posts: 27 Member: 77807 Status: Offline Thanks Meter: 1	I solve one myx5-2 with the same problem.I just backup the flash, and then reflash the phone using sws-sag with the same flash. Everything was ok at the end.Just try that and post result. Regards.

03-08-2006, 22:27	#6 (permalink)
dj_mseal Freak Poster Join Date: Nov 2004 Location: ALGERIA Age: 43 Posts: 191 Member: 90801 Status: Offline Thanks Meter: 29	not flash prob. just change charging connector and clean.