How to flash X680 ?

[pepik]

I have one Samsung X680 for flashing

I use optiflash : OptiFlash_x630_x680_20060427 /from UST support page/
Options settings :
Generic : Customer T: MARBLE 256Mb*256Mb*128Mb(UARTs)

I try cable for X660 /rx,Tx,GND/ and cable E860 /COM port via UST Pro box/

File for flashing : X680XXFH1_BIN.s3

Here is a log from Optiflash :

I E340 11:53:41 SendFile=C:\k\aa\X680XXFH1_BIN.s3, Mode=0
I E341 11:53:41 TalkToFlashloader (using COM8)
I E342 11:53:41 Switching over to flash loader
I E343 11:53:44 COM8 is connected to UART1
I E344 11:53:44 Sync'ing to flash loader
I E345 11:53:44 Sync'ing
I E346 11:53:44 sync'ed
I E347 11:53:44 Querying device information
I E348 11:53:44 Flash loader version: V5.13
I E349 11:53:44 Max. TX/RX size: 65536/32768
I E350 11:53:44 Mobile transfer speeds: 115200, 230400, 460800
I E351 11:53:44 IDs returned by detection: 2
I E352 11:53:44 AMD:0x01/0x227e3d00, Intel:0x00/0xe1a00000, NAND:0x00/0x00000000(image size=0)
I E353 11:53:44 AMD:0x94/0xe1dd0000, Intel:0x94/0xe3e00000, NAND:0x00/0x00000000(image size=0)
I E354 11:53:44 Detected flash chips: 2
I E355 11:53:44 Platform : [Customer T: MARBLE 256Mb*256Mb*128Mb(UARTs)]
I E356 11:53:44 @@Unknown Flash Chip: 0x01/0x227e3d00, 0x00/0xe1a00000, 0x00/0x00000000
I E357 11:53:44 SendFile: 4 (ERR_FLASHTYPE)
I E358 11:53:44 Closed COM8
I E359 11:53:44 ReLoad: 4 (ERR_FLASHTYPE)
I E360 11:53:44 Error code: ERR_FLASHTYPE
E E361 11:53:44 Sorry, an error has occured ! (ERR_FLASHTYPE)
I E362 11:53:44 ThreadProtocol finished
I E363 11:53:44 ThreadProtocol: 4
I E364 11:53:44 ThreadGUI finished

Any idea for flash it ?

Cable is ok for flashing X660 !