>>s5600 unlock 100% with ustpro2<< - GSM-Forum

GsmTower · 10-22-2009, 20:57

Samsung S5600 Unlock done with USTPRO2 v10.0.0

1- Tick Use Usb Cable and select your "Qualcomm Diagnostic Usb Port"
2- Connect Usb Cable and Click "Read Code"
3- Put phone in Qualcomm mode by entering *#782872#
4- Power off phone, disconnect usb cable and put a valid sim card
5- Connect usb cable, power on phone and press "OK"
6- Sometimes the calculate unlock code can take several minutes !

S5600.GIF

gsmtower

Naseerjako · 10-25-2009, 17:04

can you please help me, i have a S5600T, i used your procedure step by step ( I select S5600), but it biginned with read partition data and stopped at 1% . i repeated it more than 20 times but the same. ( i used the original USB cable ), i try to connect cable in pc and in ust pro , but the same. although it detected the phone at right port.

I note that when i enter the Qualcom mode entering *#782872# then confirm, nothing happend.may be i should enter any thing more to enter Qualcom mode.

did i make any thing wrong!!!!! or may be S5600T is not supported yet!!!!
please advise me urgent............thanks

lilong_lee · 10-26-2009, 05:39

changes comport area then restart pc if not detect used usb or cable then click fast direck unlock ........

lilong_lee · 10-26-2009, 05:41

check flashing security version and used usd data cable or rj45 then do it again...

MOBIL CLINIC · 10-26-2009, 05:48

Big thanks for post here report!! kindly always try to post success report in Correct Sticky Threads.

Rootcat · 10-26-2009, 13:08

with M8800 nothing happens it stops at begin of partition reading

Naseerjako · 10-26-2009, 15:55

@lilong lee, do you mean fast direct unlock works with out flashing!!!!!!!!!

which comport area is to be changed, i tryed in 2 computers but the same!!!!!
and how to check flashing security version!!!!! thanks to your reply.

inaam143 · 10-27-2009, 12:57

Quote:

Originally Posted by GsmTower

Samsung S5600 Unlock done with USTPRO2 v10.0.0

1- Tick Use Usb Cable and select your "Qualcomm Diagnostic Usb Port"
2- Connect Usb Cable and Click "Read Code"
3- Put phone in Qualcomm mode by entering *#782872#
4- Power off phone, disconnect usb cable and put a valid sim card
5- Connect usb cable, power on phone and press "OK"
6- Sometimes the calculate unlock code can take several minutes !

Attachment 212439

gsmtower

in support version 9.9.60 only available .
where u got this version 10.0.0

GsmTower · 11-01-2009, 10:38

Quote:

Originally Posted by inaam143

in support version 9.9.60 only available .
where u got this version 10.0.0

http://rapidshare.com/files/29615567...o2_v10.0.0.exe

GSMTOWER

de buurman · 11-02-2009, 14:44

my s5600 is in phone freeze and then its not working because then the pc dont see the port he is conected with if i have sim in it does anybody know how to solve this problem
regards
debuurman

inaam143 · 11-03-2009, 18:06

Quote:

Originally Posted by GsmTower

http://rapidshare.com/files/29615567...o2_v10.0.0.exe

GSMTOWER

error message shown file is missing

Naseerjako · 11-03-2009, 19:26

Mr. Siroya!!!! any comment to my question pleas???????

::.::RAMJAN::.:: · 11-06-2009, 11:14

Quote:

Originally Posted by de buurman

my s5600 is in phone freeze and then its not working because then the pc dont see the port he is conected with if i have sim in it does anybody know how to solve this problem
regards
debuurman

Sos call after type *#782872#

xxxx28 · 11-22-2009, 13:38

working 100% S5600T

Searching for UMTS phone...
Qualcomm phone detected : COM215
Reading partition data...
Reading security...
Calculating codes, Please WAIT...
Calculate OK!
Unfreeze Code : 72405151
Net Lock Code : 61503685
Subset Code : 00000000
SP Lock Code : 00000000
CP Lock Code : 00000000
SIM Lock Code : 12369874
Activa Code : 12369874
Operation successful.
Elapsed Time (03:57)

Alexandro Monte · 11-26-2009, 12:57

Good morning!
I did everything mentioned procedure and the code was generated phone freeze but I can not type, have some code that I can solve this problem ..
I thank
Alex Cavalcante

10-22-2009, 20:57	#1 (permalink)
GsmTower No Life Poster Join Date: Jan 2006 Location: gsmtower.com Posts: 2,578 Member: 226755 Status: Offline Thanks Meter: 198	>>s5600 unlock 100% with ustpro2<< Samsung S5600 Unlock done with USTPRO2 v10.0.0 1- Tick Use Usb Cable and select your "Qualcomm Diagnostic Usb Port" 2- Connect Usb Cable and Click "Read Code" 3- Put phone in Qualcomm mode by entering *#782872# 4- Power off phone, disconnect usb cable and put a valid sim card 5- Connect usb cable, power on phone and press "OK" 6- Sometimes the calculate unlock code can take several minutes ! S5600.GIF gsmtower

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
>>C270 UNLOCK 100% WITH USTPro2<<	GsmTower	UST Pro II	0	10-22-2009 21:14
Cu500 Unlocked 100% With Furious Gold!!!!!!!!!	ARAB GSM	FuriousGold	17	06-08-2007 21:11
v975 unlocked 100% with 1.3 no problems	snake	Ultima Box Light	6	01-24-2007 22:49
lg L1400 unlocked 100% with vygis	mobileclinic	VygisToolbox	0	04-13-2005 06:36

10-25-2009, 17:04	#2 (permalink)
Naseerjako Freak Poster Join Date: Jan 2006 Posts: 213 Member: 224881 Status: Offline Thanks Meter: 9	can you please help me, i have a S5600T, i used your procedure step by step ( I select S5600), but it biginned with read partition data and stopped at 1% . i repeated it more than 20 times but the same. ( i used the original USB cable ), i try to connect cable in pc and in ust pro , but the same. although it detected the phone at right port. I note that when i enter the Qualcom mode entering *#782872# then confirm, nothing happend.may be i should enter any thing more to enter Qualcom mode. did i make any thing wrong!!!!! or may be S5600T is not supported yet!!!! please advise me urgent............thanks

10-26-2009, 05:39	#3 (permalink)
lilong_lee No Life Poster Join Date: Jul 2009 Location: philippines now here in U.A.E Age: 38 Posts: 2,852 Member: 1070665 Status: Offline Sonork: 100.1636802 Thanks Meter: 572	changes comport area then restart pc if not detect used usb or cable then click fast direck unlock ........

10-26-2009, 05:41	#4 (permalink)
lilong_lee No Life Poster Join Date: Jul 2009 Location: philippines now here in U.A.E Age: 38 Posts: 2,852 Member: 1070665 Status: Offline Sonork: 100.1636802 Thanks Meter: 572	check flashing security version and used usd data cable or rj45 then do it again...

10-26-2009, 05:48	#5 (permalink)
MOBIL CLINIC Banned Join Date: Nov 2007 Age: 36 Posts: 3,182 Member: 631286 Status: Offline Thanks Meter: 1,250	Big thanks for post here report!! kindly always try to post success report in Correct Sticky Threads.

10-26-2009, 13:08	#6 (permalink)
Rootcat Insane Poster Join Date: Jan 2007 Posts: 75 Member: 442620 Status: Offline Thanks Meter: 3	with M8800 nothing happens it stops at begin of partition reading

10-26-2009, 15:55	#7 (permalink)
Naseerjako Freak Poster Join Date: Jan 2006 Posts: 213 Member: 224881 Status: Offline Thanks Meter: 9	@lilong lee, do you mean fast direct unlock works with out flashing!!!!!!!!! which comport area is to be changed, i tryed in 2 computers but the same!!!!! and how to check flashing security version!!!!! thanks to your reply.

11-02-2009, 14:44	#10 (permalink)
de buurman Freak Poster Join Date: Jun 2004 Location: spain Age: 54 Posts: 195 Member: 68911 Status: Offline Thanks Meter: 5	my s5600 is in phone freeze and then its not working because then the pc dont see the port he is conected with if i have sim in it does anybody know how to solve this problem regards debuurman

11-03-2009, 19:26	#12 (permalink)
Naseerjako Freak Poster Join Date: Jan 2006 Posts: 213 Member: 224881 Status: Offline Thanks Meter: 9	Mr. Siroya!!!! any comment to my question pleas???????

11-22-2009, 13:38	#14 (permalink)
xxxx28 Junior Member Join Date: Aug 2004 Posts: 35 Member: 77812 Status: Offline Thanks Meter: 0	working 100% S5600T Searching for UMTS phone... Qualcomm phone detected : COM215 Reading partition data... Reading security... Calculating codes, Please WAIT... Calculate OK! Unfreeze Code : 72405151 Net Lock Code : 61503685 Subset Code : 00000000 SP Lock Code : 00000000 CP Lock Code : 00000000 SIM Lock Code : 12369874 Activa Code : 12369874 Operation successful. Elapsed Time (03:57)

11-26-2009, 12:57	#15 (permalink)
Alexandro Monte No Life Poster Join Date: Aug 2008 Location: brazil Age: 47 Posts: 922 Member: 846805 Status: Offline Sonork: alex cavalcante Thanks Meter: 261	Good morning! I did everything mentioned procedure and the code was generated phone freeze but I can not type, have some code that I can solve this problem .. I thank Alex Cavalcante