Another starnge...K800 ..look here.. - GSM-Forum

harim_1981 · 06-11-2008, 09:46

i am not able to finish full flash...not able to finish gdfs write...

not able to repair...fully...

all things gives error in the 99%...repair in 87% stops and gives error..

Code:

--- Reading Info---------------------------------------------------------------
User selected phone K800 using Normal boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355704-01-651350-7
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Starting CS Loader GDFS Service ...
Error : Failed.

--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355704-01-651350-7
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ...
Warning : Aborted by user.

--- Security Bypass------------------------------------------------------------
User selected phone K800 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355704-01-651350-7
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ... 
Stage 1 completed succesfully
Stage 2 start
Hint : Now the probe might be disconnected
Processing... 
Entering Security Bypass mode ... 
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ... 
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355704-01-651350-7
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 2380786D1560059F
Finalizing ... 
Stage 2 completed succesfully
Done.

--- Loading flash file---------------------------------------------------------
Loading "D:\DreamSE\fullflash\K800_full_OTP-CID51_EROM-CID52_Intel-MOYOBE.bin"...
Done.

--- Write Flash----------------------------------------------------------------
User selected phone K800 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ... 
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355704-01-651350-7
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 2380786D1560059F
Flash Chip : Intel 48F50xxM0Y0 
Flash Chip ID : 887E0089 
Writing ...
Error : Failed.

--- Write Flash----------------------------------------------------------------
User selected phone K800 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ... 
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355704-01-651350-7
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 2380786D1560059F
Flash Chip : Intel 48F50xxM0Y0 
Flash Chip ID : 887E0089 
Writing ...
Error : Failed.

--- Loading GDFS file----------------------------------------------------------
Loading "D:\DreamSE\GDFS\K800_gdfs\K800_gdfs.dmap"...
Done.

--- Write GDFS-----------------------------------------------------------------
User selected phone K800 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ... 
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 355704-01-651350-7
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 2380786D1560059F
Flash Chip : Intel 48F50xxM0Y0 
Flash Chip ID : 887E0089 
Generating GDFS...
Writing GDFS...
Error : Failed

please help needed...

melgsm · 06-11-2008, 09:49

may be hardware proplem
but check with setool and cruiser

GSM Dream · 06-11-2008, 11:06

This is hardware issue for sure.

harim_1981 · 06-11-2008, 13:35

is it flash chip damaged...?

can i try to replace the flash chip from another one...

thanks sir

sngsm · 06-11-2008, 13:49

i think its hrdware problem or try to flash the fone with setool

Regards
Ahsan

.::Gsm Killer::. · 06-11-2008, 13:51

Quote:

Originally Posted by harim_1981

is it flash chip damaged...?

can i try to replace the flash chip from another one...

thanks sir

Only reball flash Ic and try again

harim_1981 · 06-11-2008, 14:58

after reballing the flash chip remains same...

can i replace the chip from another board

and try...?

GSM Dream · 06-11-2008, 15:07

Quote:

can i replace the chip from another board
and try

Of course you can (but you should use flash chip from phone with same platform).

harim_1981 · 06-11-2008, 15:11

Quote:

Originally Posted by GSM Dream

Of course you can (but you should use flash chip from phone with same platform).

means DB2020/db2030

am i rite

thanks sir

delchoni · 06-11-2008, 15:20

need to change flash ic use from same platform

harim_1981 · 06-11-2008, 16:14

ok will change the flash chip and tell you the result

thanks sir..

harim_1981 · 06-11-2008, 17:05

SUCCESS....SUCCESS.......SUCCESSS.....

After changing flash chip.....set works...fine...

thanks here for helping....thanks a lot guys...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
tp 2 for k800 is here	Mind Power	SETool2	3	07-10-2009 08:55
Another good forum is here	Javajohn	GSM Mobile Links	0	06-29-2006 07:50
Nokia Clips for Unlock? Look here..!!!!	landy	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	15	09-01-2001 07:46
Exchange...HOT sw...look here...	michael57	Old Ericsson Phones & Sony Phones	0	03-02-2001 00:12

06-11-2008, 09:49	#2 (permalink)
melgsm No Life Poster Join Date: Nov 2007 Location: Egypt Age: 35 Posts: 1,866 Member: 629039 Status: Offline Sonork: 100.112945 Thanks Meter: 847	may be hardware proplem but check with setool and cruiser

06-11-2008, 11:06	#3 (permalink)
GSM Dream No Life Poster Join Date: Dec 2005 Posts: 2,430 Member: 214480 Status: Offline Thanks Meter: 2,087	This is hardware issue for sure.

06-11-2008, 13:35	#4 (permalink)
harim_1981 No Life Poster Join Date: Mar 2006 Location: tamilnadu, india. Posts: 2,319 Member: 243961 Status: Offline Sonork: 100.1591654 Thanks Meter: 104	is it flash chip damaged...? can i try to replace the flash chip from another one... thanks sir

06-11-2008, 13:49	#5 (permalink)
sngsm Freak Poster Join Date: Apr 2007 Posts: 254 Member: 496120 Status: Offline Thanks Meter: 57	i think its hrdware problem or try to flash the fone with setool Regards Ahsan

06-11-2008, 14:58	#7 (permalink)
harim_1981 No Life Poster Join Date: Mar 2006 Location: tamilnadu, india. Posts: 2,319 Member: 243961 Status: Offline Sonork: 100.1591654 Thanks Meter: 104	after reballing the flash chip remains same... can i replace the chip from another board and try...?

06-11-2008, 15:20	#10 (permalink)
delchoni No Life Poster Join Date: Mar 2006 Location: Bulgaria Asenovgrad Age: 42 Posts: 3,197 Member: 239176 Status: Offline Sonork: 100.1602815 Thanks Meter: 851	need to change flash ic use from same platform

06-11-2008, 16:14	#11 (permalink)
harim_1981 No Life Poster Join Date: Mar 2006 Location: tamilnadu, india. Posts: 2,319 Member: 243961 Status: Offline Sonork: 100.1591654 Thanks Meter: 104	ok will change the flash chip and tell you the result thanks sir..

06-11-2008, 17:05	#12 (permalink)
harim_1981 No Life Poster Join Date: Mar 2006 Location: tamilnadu, india. Posts: 2,319 Member: 243961 Status: Offline Sonork: 100.1591654 Thanks Meter: 104	SUCCESS....SUCCESS.......SUCCESSS..... After changing flash chip.....set works...fine... thanks here for helping....thanks a lot guys...