K810 in normal mode blinking - GSM-Forum

matin-gsm · 05-08-2008, 12:11

hi ,
phone after write gdfs can be turn ON completly (with insert correct sim)but after unlock when i choose "normal mode" will blink .
gdfs write tried with tp access and dcu-60 .

Code:

--- Write GDFS-----------------------------------------------------------------
User selected phone K810 using DCU60 boot mode
1) Turn OFF the phone.
2) Hold <C> button and connect the phone to DCU60 cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 359451-01-547505-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Starting CS Loader GDFS Service ... 
Writing GDFS ...
Done.
 
--- Security Bypass------------------------------------------------------------
User selected phone K810 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 359451-01-547505-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Hint : Now the probe might be disconnected
Processing ... 
Stage 1 completed succesfully
Stage 2 start
Hint : Now the probe might be disconnected
Processing... 
Entering Security Bypass mode ... 
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ... 
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 359451-01-547505-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 23801B7C1510AB85
Finalizing ... 
Stage 2 completed succesfully
Done.
--- Unlock and Repair----------------------------------------------------------
User selected phone K810 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 99000301FFFFFFFF (DB2020 / DB2030)
Sending Application ... 
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 359451-01-547505-8
OTP CID = 51
EROM Color = 4 : RED
EROM CID = 52
Baseband Chip ID = 9900
Phone ID = 23801B7C1510AB85
Reading GDFS...
Testing security ...
 GDFS 0013 Hash OK
 GDFS 0006 Hash OK
 GDFS 000E Hash OK
 GDFS 001C Hash OK
Unlocking ... 
Testing security ...
 GDFS 0013 Hash OK
 GDFS 0006 Hash OK
 GDFS 000E Hash OK
 GDFS 001C Hash OK
Generating GDFS...
Writing GDFS...
Done.

matin-gsm · 05-08-2008, 12:12

the phone full flashed also .

GSM Dream · 05-08-2008, 12:25

Maybe try to use other fullflash file.
But I think, that is most likely, that it is hardware issue.

matin-gsm · 05-08-2008, 18:45

its strange all is ok in flight mode !!!!!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V3x lcd black in normal mode, ok in boot mode	fethi	Motorola P2k	6	10-01-2010 10:29
in normal mode phone is ok ,not in batt	akshay	Nokia Hardware & Hardware Repair	18	12-04-2005 12:48
PST can find c350 when I put it into Repaire mode, but not in normal mode, why?	flysand	Motorola P2k	3	04-16-2004 11:24
Need to remotely switch on phone in normal mode	kyiv	Old Ericsson Phones & Sony Phones	0	08-20-2003 03:10

05-08-2008, 12:12	#2 (permalink)
matin-gsm No Life Poster Join Date: Feb 2007 Location: T.me/unlockarena Posts: 1,658 Member: 446040 Status: Offline Thanks Meter: 1,065	the phone full flashed also .

05-08-2008, 12:25	#3 (permalink)
GSM Dream No Life Poster Join Date: Dec 2005 Posts: 2,430 Member: 214480 Status: Offline Thanks Meter: 2,087	Maybe try to use other fullflash file. But I think, that is most likely, that it is hardware issue.

05-08-2008, 18:45	#4 (permalink)
matin-gsm No Life Poster Join Date: Feb 2007 Location: T.me/unlockarena Posts: 1,658 Member: 446040 Status: Offline Thanks Meter: 1,065	its strange all is ok in flight mode !!!!!!!!