new solution 4 w 810 cid 52 52

[soshan]

best & powerfull box is dream box
we sure dont have file flash 4 this mothel {w810 cid 52 & 53}
so 4 repair this problem only supported by dream
solution:
1. select w200
2. select test point
3. select stag 1 [because cid 52]
4. writng gdfs
5. security by pass
6. full flash cid 50 by test point
other solution:
6. select w810
7. select testpoint
8.current cid select 50
9. only use test point 2

[soshan]

this solution usefull 4 w810,k510,k310 cid 52

do u chech this metode?

[Allunlockingsource]

Thanks brother good sharing

[soshan]

escuse me
in downgrad u should 1&2 test point is needed because w810 very bad product

result w810 cid 52

User selected phone W200 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 52
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356573-01-269634-6
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 52



Warning : Connected phone is not W200
Please select correct phone model
Seems to be W810
Processing ... -
Hint : Now the probe might be disconnected

Stage 1 completed succesfully



cid 52 in db210 &db2012 only use test point1



--- Unlock and Repair----------------------------------------------------------
User selected phone W200 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 52
Baseband Chip ID = 8040
Phone ID = 2280DD701520D441
Warning : Connected phone is not W200
Please select correct phone model
Seems to be W810
Reading GDFS...
Testing security ...
GDFS 0013 Hash Failed
GDFS 0006 Hash Failed
GDFS 000E Hash Failed
GDFS 001C Hash Failed
Unlocking ...
Testing security ...
GDFS 0013 Hash OK
GDFS 0006 Hash OK
GDFS 000E Hash OK
GDFS 001C Hash OK
Generating GDFS...
Writing GDFS...
Done.

--- Loading GDFS file----------------------------------------------------------
Loading "D:\dream\GDFS\w810 cid 50.dmap"...
Done.

--- Write GDFS-----------------------------------------------------------------
User selected phone W200 using Security Bypass boot mode
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 52
Baseband Chip ID = 8040
Phone ID = 2280DD701520D441
Flash Chip : Intel 48F50xxM0Y0
Flash Chip ID : 887E0089
Warning : Connected phone is not W200
Please select correct phone model
Seems to be W810
Generating GDFS...
Writing GDFS...
Done.


this time gdfs is ok so only downgrade 52to 50


--- Security Bypass------------------------------------------------------------
User selected phone W810 using Test Point boot mode
Stage 1 started
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Warning : Detected platform is different from selected
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 52
NOR Flash ID = 897E
OTP Status = LOCKED
OTP IMEI = 356573-01-269634-6
OTP CID = 50
EROM Color = 4 : RED
EROM CID = 52
Processing ... -
Hint : Now the probe might be disconnected

Stage 1 completed succesfully
Stage 2 start
Hint : Now the probe might be disconnected
Processing...
Entering Security Bypass mode ...
1) Turn OFF the phone.
2) Connect the phone to DreamBox cable.
Boot Responce = 5A
Processor ID = 8040030101010101 (DB2012 R3A)
Warning : Detected platform is different from selected
EROM Color (BOOT) = 4 : RED
EROM CID (BOOT) = 50
Baseband Chip ID = 8040
Phone ID = 2280DD701520D441
Finalizing ...
Stage 2 completed succesfully
Done.

[Umair Rashid]

congratulations !!!!!!!!!!!

[soshan]

all user
hi
this sulotion is usefull 4 w 810 cid 51 52 53
thanks dream box

[ghazishah]

thanks dear very good info

[abi10]

Dude, do you know if you are using the same procedure in SEtool?
Ja did TP repair pathway in several cell phones, but not in w810 ...
And I have one here with all locks closed, but the TP1 invalid!

If you like doing in SEtool, you have the procedure?

Thanks for helping

[zapata_senator]

maybe..................

[Nurettin Duman]

W810 using Test Point

[soshan]

Originally Posted by abi10

Dude, do you know if you are using the same procedure in SEtool?
Ja did TP repair pathway in several cell phones, but not in w810 ...
And I have one here with all locks closed, but the TP1 invalid!

If you like doing in SEtool, you have the procedure?

Thanks for helping

maybe
but u should solve gdfs problem in the first stage
after i thinke u should writed safe erome by testpoint 4 downgrade or use cross flashinge by alternative bypass security

[Naeem123e]

best & powerfull box is dream box
we sure dont have file flash 4 this mothel {w810 cid 52 & 53}
so 4 repair this problem only supported by dream
solution:
1. select w200
2. select test point
3. select stag 1 [because cid 52]
4. writng gdfs
5. security by pass
6. full flash cid 50 by test point
other solution:
6. select w810
7. select testpoint
8.current cid select 50
9. only use test point 2

[wgmmmx1]

Originally Posted by Naeem123e

best & powerfull box is dream box
we sure dont have file flash 4 this mothel {w810 cid 52 & 53}
so 4 repair this problem only supported by dream
solution:
1. select w200
2. select test point
3. select stag 1 [because cid 52]
4. writng gdfs
5. security by pass
6. full flash cid 50 by test point
other solution:
6. select w810
7. select testpoint
8.current cid select 50
9. only use test point 2

Why you SPAM this section and reflash topic that got 3 years without sens ?? ??