Siemens Always Stop At 99% - GSM-Forum

chiragp · 06-23-2008, 16:04

NEED HELP TO RECOVER THIS PROBLEM

THANKS

GSM Dream · 06-23-2008, 16:33

Hello!
Try to enable "Skip memory test during..." in options, or enable Force "Safe Mode"

hackerbd · 06-23-2008, 20:40

Its hardware problem.Re hit flash ic and try again.

chiragp · 06-24-2008, 07:16

Power On the phone ... OK
Hint : Now the probe might be disconnected
Sending loader ... OK
Testing RAM ...OK
Flash Chip = Intel 28F256L18T, size 32768 Kb
Flash IMEI = 353663-00-503021-6
Phone ID = C08D8699
Bootcore = SIEMENS C6V
Firmware = SIEMENS C6V v12 lg2
Phone IMEI = 353663-00-503021-6
SPLock CRC = OK
Phone Code = 1234 : FF
Writting speed is 131 cps
Done.

eL_KarEh · 06-24-2008, 11:58

same problème whith siemens C75 99% stop testing ram

GSM Dream · 06-24-2008, 12:35

Hello!
Try to enable "Skip memory test during..." in options, or enable Force "Safe Mode"

sharaz191 · 06-24-2008, 12:56

me too have same problem

--- Running scenario-----------------------------------------------------------
User selected phone CX65 using Test Point boot mode
Write Fullflash
Repair IMEI (use factory defined from OTP area)
Unlock all locks

Power On the phone ... OK
Hint : Now the probe might be disconnected
Sending loader ... OK
Warning : RAM testing skipped

and enable force mode too

Problem Solved By Heating flash chip

I_sumo · 07-04-2008, 12:28

Quote:

Originally Posted by chiragp

Power On the phone ... OK
Hint : Now the probe might be disconnected
Sending loader ... OK
Testing RAM ...OK
Flash Chip = Intel 28F256L18T, size 32768 Kb
Flash IMEI = 353663-00-503021-6
Phone ID = C08D8699
Bootcore = SIEMENS C6V
Firmware = SIEMENS C6V v12 lg2
Phone IMEI = 353663-00-503021-6
SPLock CRC = OK
Phone Code = 1234 : FF
Writting speed is 131 cps
Done.

Can u tell us how your problem was resolved ??? Just like Sharaz191 has written the facts here.

I ve got the same phone having same problem.

BR

sharaz191 · 07-04-2008, 13:51

Quote:

Originally Posted by I_sumo

Can u tell us how your problem was resolved ??? Just like Sharaz191 has written the facts here.

I ve got the same phone having same problem.

BR

he did this
enable "Skip memory test during

mozib · 09-14-2008, 10:25

re-hote or re-ball cpu

06-23-2008, 16:04	#1 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	Siemens Always Stop At 99% NEED HELP TO RECOVER THIS PROBLEM THANKS

06-24-2008, 12:56	#7 (permalink)
sharaz191 No Life Poster Join Date: Mar 2006 Location: In My CoMpaQ LaPtOP Posts: 2,077 Member: 249300 Status: Offline Sonork: 10101010 Thanks Meter: 569	me too have same problem --- Running scenario----------------------------------------------------------- User selected phone CX65 using Test Point boot mode Write Fullflash Repair IMEI (use factory defined from OTP area) Unlock all locks Power On the phone ... OK Hint : Now the probe might be disconnected Sending loader ... OK Warning : RAM testing skipped and enable force mode too Problem Solved By Heating flash chip Last edited by sharaz191; 06-24-2008 at 13:05.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MC60 - flashing always stops at 83%	realdodo	E-Gold Based Phones	7	09-27-2004 20:02
t68 to t68i AVR flashing stops at 99%	Argo_Andrew	Sony Ericsson	11	05-27-2003 08:55
flashing t18s always ended at 99%	bengong	Old Ericsson Phones & Sony Phones	6	09-02-2002 13:39
1018 DEAD AFTER FLASHING STOPS AT 99%	Sher	Old Ericsson Phones & Sony Phones	19	08-24-2002 14:34

06-23-2008, 16:33	#2 (permalink)
GSM Dream No Life Poster Join Date: Dec 2005 Posts: 2,430 Member: 214480 Status: Offline Thanks Meter: 2,087	Hello! Try to enable "Skip memory test during..." in options, or enable Force "Safe Mode"

06-23-2008, 20:40	#3 (permalink)
hackerbd No Life Poster Join Date: Mar 2006 Location: Bangladesh Posts: 1,196 Member: 247758 Status: Offline Sonork: 100.1574842 Thanks Meter: 259	Its hardware problem.Re hit flash ic and try again.

06-24-2008, 07:16	#4 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	Power On the phone ... OK Hint : Now the probe might be disconnected Sending loader ... OK Testing RAM ...OK Flash Chip = Intel 28F256L18T, size 32768 Kb Flash IMEI = 353663-00-503021-6 Phone ID = C08D8699 Bootcore = SIEMENS C6V Firmware = SIEMENS C6V v12 lg2 Phone IMEI = 353663-00-503021-6 SPLock CRC = OK Phone Code = 1234 : FF Writting speed is 131 cps Done.

06-24-2008, 11:58	#5 (permalink)
eL_KarEh Freak Poster Join Date: May 2005 Age: 40 Posts: 122 Member: 144643 Status: Offline Thanks Meter: 32	same problème whith siemens C75 99% stop testing ram

06-24-2008, 12:35	#6 (permalink)
GSM Dream No Life Poster Join Date: Dec 2005 Posts: 2,430 Member: 214480 Status: Offline Thanks Meter: 2,087	Hello! Try to enable "Skip memory test during..." in options, or enable Force "Safe Mode"

09-14-2008, 10:25	#10 (permalink)
mozib Registered User Join Date: Feb 2004 Location: Bangladesh Age: 50 Posts: 48 Member: 52964 Status: Offline Thanks Meter: 5	re-hote or re-ball cpu