SX1 won't continue power-up - GSM-Forum

kungpaoski · 07-20-2008, 01:52

Mates have here Siemens SX1 when powered-up just displays logo then shuts down. Tried to identify it using tp method but no response. And found out cpu chip has reflowed already. Would also try to identify via cut track but image of board in cut track method is different from my units board. Any possible solution for this. not very familiar with siemens mobile.

b.r.

kungpaoski · 07-20-2008, 05:13

I have manage to read phone info via stored boot key boot mode:

- Reading Info---------------------------------------------------------------
User selected phone SX1 using Stored Boot Key boot mode

Power On the phone ... OK
Sending loader ... OK
SIEMENS SX1
Software version: 15
IMEI: 352079-00-119318-2
Error : Bootkey was not found or invalid.
Error : Failed.

I get this error message: Error : Bootkey was not found or invalid.
Error : Failed.

how to resolve this?

b.r.

cover_one · 07-20-2008, 05:29

format your sx1 like that , phone need to be powered off hold *+#+powered on your phone will be formated in 2-3 min and work again

kungpaoski · 07-20-2008, 05:56

Quote:

Originally Posted by cover_one

format your sx1 like that , phone need to be powered off hold *+#+powered on your phone will be formated in 2-3 min and work again

thanks bro problem solved

b.r.

07-20-2008, 01:52	#1 (permalink)
kungpaoski No Life Poster Join Date: Aug 2006 Location: Philippines Posts: 688 Member: 329609 Status: Offline Thanks Meter: 245	SX1 won't continue power-up Mates have here Siemens SX1 when powered-up just displays logo then shuts down. Tried to identify it using tp method but no response. And found out cpu chip has reflowed already. Would also try to identify via cut track but image of board in cut track method is different from my units board. Any possible solution for this. not very familiar with siemens mobile. b.r.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N97i won't continue power on	unong	Chinese Models & Cloned Phones	0	03-02-2010 21:06
Sx1 won't continue powere-up	kungpaoski	E-Gold Based Phones	1	07-20-2008 03:09
T610 won't power up without charger	buhvald	Sony Ericsson Hardware Repair	3	12-16-2005 22:27
E700 won't power up after custom E2P reset!!!	simplex	Trident/AGERE Platform	7	06-22-2005 20:56

07-20-2008, 05:13	#2 (permalink)
kungpaoski No Life Poster Join Date: Aug 2006 Location: Philippines Posts: 688 Member: 329609 Status: Offline Thanks Meter: 245	I have manage to read phone info via stored boot key boot mode: - Reading Info--------------------------------------------------------------- User selected phone SX1 using Stored Boot Key boot mode Power On the phone ... OK Sending loader ... OK SIEMENS SX1 Software version: 15 IMEI: 352079-00-119318-2 Error : Bootkey was not found or invalid. Error : Failed. I get this error message: Error : Bootkey was not found or invalid. Error : Failed. how to resolve this? b.r.

07-20-2008, 05:29	#3 (permalink)
cover_one No Life Poster Join Date: Dec 2004 Location: In Your Room Age: 47 Posts: 586 Member: 97299 Status: Offline Thanks Meter: 43	format your sx1 like that , phone need to be powered off hold *+#+powered on your phone will be formated in 2-3 min and work again