Cannot connecting with C975 at all. - GSM-Forum

guolimm · 02-18-2006, 21:01

Help, I tried to connected my C975 with the tool but it always reports that
Connecting to phone ...
ERROR: Could not connect

Driver has been installed and is not conflicting with any other port. What might me the problem?
Thanks

Stylo_GSM · 02-18-2006, 21:13

hi

we all ave to wait for a big update 2-3 days time
every1 has a problem unlocking their fones

Stylo_GSM · 02-18-2006, 21:14

hi
we all ave to wait for a big update 2-3 days time
every1 has a problem unlocking their fones

guolimm · 02-18-2006, 21:16

It seems the other can at least connect the phone but I cannot, wait for the answer~~~~~

zulea · 02-18-2006, 21:17

Did you run and install this:
LibUSB_Setup_v01101.exe ???

guolimm · 02-18-2006, 21:24

Quote:

Originally Posted by zulea

Did you run and install this:
LibUSB_Setup_v01101.exe ???

Yes I did. But there is nothing runnable after installation except a test programm. I am not really sure what it is used for?

Stylo_GSM · 02-18-2006, 21:24

well i run the software
but it connects and then gives a error message or "access violation...."
this happened with v220 , v3 etc pls fix the bug

guolimm · 02-18-2006, 22:21

V3 was just tried, complete same problem.

guolimm · 02-19-2006, 10:35

Problem changed to the following:

Connecting to phone ...
Detected USB device VID:22B8 PID:4902
Switching to P2K mode ...
ERROR: Could not connect

I am using XP(SP2). Also tried the other mechine,not working as well.

The Repair Shop · 02-19-2006, 11:40

same here as well. good start to a new tool?????

zulea · 02-19-2006, 12:07

Quote:

Originally Posted by guolimm

Problem changed to the following:
Connecting to phone ...
Detected USB device VID:22B8 PID:4902
Switching to P2K mode ...
ERROR: Could not connect
I am using XP(SP2). Also tried the other mechine,not working as well.

Hi,

Just use v1.9 and all will be OK.
More details here:
http://forum.gsmhosting.com/vbb/showthread.php?t=272768

Best regards,
Zulea

guolimm · 02-19-2006, 12:26

Quote:

Originally Posted by zulea

Hi,

Just use v1.9 and all will be OK.
More details here:
http://forum.gsmhosting.com/vbb/showthread.php?t=272768

Best regards,
Zulea

1.9 is also tried and got:

Connecting to phone ...
Detected USB device VID:22B8 PID:4901
ERROR: Could not set USB configuration : could not set config 1: win error: The parameter is incorrect.

ERROR: Could not open flash interface

What might be the problem?

guolimm · 02-19-2006, 12:29

Quote:

Originally Posted by zulea

Hi,

Just use v1.9 and all will be OK.
More details here:
http://forum.gsmhosting.com/vbb/showthread.php?t=272768

Best regards,
Zulea

I also tried to manually change the phone to flash mode and after that I got:

Connecting to phone ...
Detected USB device VID:22B8 PID:4903
Opened Motorola S Flash Neptune LTE OK
Connected OK
Sending loader to phone ...
ERROR: FLASHCMD invalid command response
ERROR: Sending JUMP command.
ERROR: Send loader failed (1)

guolimm · 02-19-2006, 16:42

V1.9 worked fine. But after unlock the phone is still locked!Why?

vIRC · 02-19-2006, 21:23

same problem...

Connecting to phone ...
Detected USB device VID:22B8 PID:3002
Switching to P2K mode ...
ERROR: Could not connect

When the tool switching to p2k mode, i hear my pc disconnect the phone (makes PLIM)

02-18-2006, 21:01	#1 (permalink)
guolimm Major Poster Join Date: Dec 2005 Posts: 43 Member: 210861 Status: Offline Thanks Meter: 0	Cannot connecting with C975 at all. Help, I tried to connected my C975 with the tool but it always reports that Connecting to phone ... ERROR: Could not connect Driver has been installed and is not conflicting with any other port. What might me the problem? Thanks

02-18-2006, 21:13	#2 (permalink)
Stylo_GSM No Life Poster Join Date: Sep 2005 Location: UK, London Age: 35 Posts: 2,236 Member: 177235 Status: Offline Sonork: 111568 Thanks Meter: 138	we all waitin hi we all ave to wait for a big update 2-3 days time every1 has a problem unlocking their fones

02-18-2006, 21:14	#3 (permalink)
Stylo_GSM No Life Poster Join Date: Sep 2005 Location: UK, London Age: 35 Posts: 2,236 Member: 177235 Status: Offline Sonork: 111568 Thanks Meter: 138	we all waitin hi we all ave to wait for a big update 2-3 days time every1 has a problem unlocking their fones

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cannot connect with spread cpu with new boxes ??	laythjg	SpiderMan	1	04-03-2009 14:14
N91 cannot be powered on at all	eugenemon	Nokia Hardware & Hardware Repair	1	12-27-2007 18:38
Sony Erricson Phone cannot connect with UFS3	hasheeb	UFS2 + UFS3-Tornadoflasher	6	05-15-2006 12:24
my phoenix cannot connect with 5185	GSMsell	Various CDMA/TDMA Cell Phones	6	08-09-2004 17:38
Even cannot connect with T10s:HEELP	GreEn	Old Ericsson Phones & Sony Phones	1	07-09-2000 13:23

02-18-2006, 21:16	#4 (permalink)
guolimm Major Poster Join Date: Dec 2005 Posts: 43 Member: 210861 Status: Offline Thanks Meter: 0	It seems the other can at least connect the phone but I cannot, wait for the answer~~~~~

02-18-2006, 21:17	#5 (permalink)
zulea No Life Poster Join Date: Jul 2001 Location: Inside Raskal pocket Age: 54 Posts: 3,316 Member: 5325 Status: Offline Thanks Meter: 8,448	Did you run and install this: LibUSB_Setup_v01101.exe ???

02-18-2006, 21:24	#7 (permalink)
Stylo_GSM No Life Poster Join Date: Sep 2005 Location: UK, London Age: 35 Posts: 2,236 Member: 177235 Status: Offline Sonork: 111568 Thanks Meter: 138	well i run the software but it connects and then gives a error message or "access violation...." this happened with v220 , v3 etc pls fix the bug

02-18-2006, 22:21	#8 (permalink)
guolimm Major Poster Join Date: Dec 2005 Posts: 43 Member: 210861 Status: Offline Thanks Meter: 0	V3 was just tried, complete same problem.

02-19-2006, 10:35	#9 (permalink)
guolimm Major Poster Join Date: Dec 2005 Posts: 43 Member: 210861 Status: Offline Thanks Meter: 0	Problem changed to the following: Connecting to phone ... Detected USB device VID:22B8 PID:4902 Switching to P2K mode ... ERROR: Could not connect I am using XP(SP2). Also tried the other mechine,not working as well.

02-19-2006, 11:40	#10 (permalink)
The Repair Shop No Life Poster Join Date: Feb 2003 Location: In My Pub Posts: 5,828 Member: 307549 Status: Offline Thanks Meter: 188	same here as well. good start to a new tool?????

02-19-2006, 16:42	#14 (permalink)
guolimm Major Poster Join Date: Dec 2005 Posts: 43 Member: 210861 Status: Offline Thanks Meter: 0	V1.9 worked fine. But after unlock the phone is still locked!Why?

02-19-2006, 21:23	#15 (permalink)
vIRC Insane Poster Join Date: Aug 2001 Location: Portugal Age: 42 Posts: 83 Member: 5938 Status: Offline Thanks Meter: 0	same problem... Connecting to phone ... Detected USB device VID:22B8 PID:3002 Switching to P2K mode ... ERROR: Could not connect When the tool switching to p2k mode, i hear my pc disconnect the phone (makes PLIM)