Cannot connecting with C975 at all. - Page 2 - GSM-Forum

DaysGSM · 02-19-2006, 22:47

Quote:

Originally Posted by guolimm

I also tried to manually change the phone to flash mode and after that I got:

Connecting to phone ...
Detected USB device VID:22B8 PID:4903
Opened Motorola S Flash Neptune LTE OK
Connected OK
Sending loader to phone ...
ERROR: FLASHCMD invalid command response
ERROR: Sending JUMP command.
ERROR: Send loader failed (1)

Bootloader not supported , you will need use TP

guolimm · 02-20-2006, 11:44

Quote:

Originally Posted by vIRC

same problem...

Connecting to phone ...
Detected USB device VID:22B8 PID:3002
Switching to P2K mode ...
ERROR: Could not connect

When the tool switching to p2k mode, i hear my pc disconnect the phone (makes PLIM)

change to another mechine, it might solve your problem. It worked for me. However, it doesn't make too much difference since even it works fine the phone is still locked. Now I am guessing what is released now is just partial function tool which can only switch phone from normal mode to flash/P2K mode but is unable to unlock anyting. Funny!!!!

zulea · 02-20-2006, 13:51

Quote:

Originally Posted by guolimm

change to another mechine, it might solve your problem. It worked for me. However, it doesn't make too much difference since even it works fine the phone is still locked. Now I am guessing what is released now is just partial function tool which can only switch phone from normal mode to flash/P2K mode but is unable to unlock anyting. Funny!!!!

Just use P2K Easy Tool v2.0 (major improvment in unlocking LTE based phones) and should work well:
http://forum.gsmhosting.com/vbb/show...67&postcount=2

Best regards,
Zulea

guolimm · 02-20-2006, 21:20

Tried v2.0, but not working sorry, neither is V3. Take your time and I will be waiting for V6.4

zulea · 02-20-2006, 21:25

Quote:

Originally Posted by guolimm

Tried v2.0, but not working sorry, neither is V3. Take your time and I will be waiting for V6.4

Post a log, and some info (phone model, bootloader version, flash version)

guolimm · 02-20-2006, 21:55

Quote:

Originally Posted by zulea

Post a log, and some info (phone model, bootloader version, flash version)

Connecting to phone ...
Detected USB device VID:22B8 PID:3002
Switching to P2K mode ...
Switching to flash mode ...
Opened Motorola S Flash Rainbow POG OK
Connected OK
Bootloader version: 0612
Sending loader to phone ...
Sending second loader to phone ...
Get info from phone ...
PDS info: PDS_3007
ADR info: 082D37F7
Powering down...
Connecting to phone ...
Detected USB device VID:22B8 PID:3002
Switching to P2K mode ...
Connected OK
Unlocking ...
Unlock OK
Powering down...

here we go. Phone is still locked. When the word ''unlock'' appears, it shows very fast. So I am guessing it not working properly. Thanks

zulea · 02-20-2006, 23:06

You said in previous post is a V3 phone, but from this log I see is a some 3G phone!
Phone Model, Bootloader Version, Flash Version???

guolimm · 02-20-2006, 23:28

Quote:

Originally Posted by zulea

You said in previous post is a V3 phone, but from this log I see is a some 3G phone!
Phone Model, Bootloader Version, Flash Version???

Sorry, this one is C975 from 3G. Bootloader is 0612 as displayed. SW version is R24_u_80.2f.88i_A. Thanks

essojay · 02-20-2006, 23:34

Maybe we should give Zulea some time, i think he has too much to grapple with now...

many bugs to fix, but little by little, it should get better,...

bR

guolimm · 02-21-2006, 11:58

Quote:

Originally Posted by essojay

Maybe we should give Zulea some time, i think he has too much to grapple with now...

many bugs to fix, but little by little, it should get better,...

bR

Surely we have to. Just try to let him know the possible so he could fix them as pointed

zulea · 02-21-2006, 12:39

Quote:

Originally Posted by guolimm

Connecting to phone ...
Detected USB device VID:22B8 PID:3002
Switching to P2K mode ...
Switching to flash mode ...
Opened Motorola S Flash Rainbow POG OK
Connected OK
Bootloader version: 0612
Sending loader to phone ...
Sending second loader to phone ...
Get info from phone ...
PDS info: PDS_3007
ADR info: 082D37F7
Powering down...
Connecting to phone ...
Detected USB device VID:22B8 PID:3002
Switching to P2K mode ...
Connected OK
Unlocking ...
Unlock OK
Powering down...

here we go. Phone is still locked. When the word ''unlock'' appears, it shows very fast. So I am guessing it not working properly. Thanks

Hi,

Please use attached programm and press Download SEEM (from 000 to 300) on this phone (or another 3G who is not unlocked). It will create a lot of files with extension .SEEM in current directory. Please ZIP all this files and send to me at email [email protected]

Many thanks,
Zulea

*phone-company* · 02-21-2006, 14:25

zulea...with this programm seem download is not realy posible (don`t work with 3G phones)....Better use P2K seem_edit

guolimm · 02-21-2006, 14:25

Quote:

Originally Posted by zulea

Hi,

Please use attached programm and press Download SEEM (from 000 to 300) on this phone (or another 3G who is not unlocked). It will create a lot of files with extension .SEEM in current directory. Please ZIP all this files and send to me at email [email protected]

Many thanks,
Zulea

Have done and sent you. Thanks for your work!

cellularcity · 02-21-2006, 15:30

Quote:

Originally Posted by guolimm

Help, I tried to connected my C975 with the tool but it always reports that
Connecting to phone ...
ERROR: Could not connect

Driver has been installed and is not conflicting with any other port. What might me the problem?
Thanks

I have this problem on a v1050, so what i done was to connect the phone and power it on with the* and # button pressed and it worked by putting the phone into boot mode first. but the problem i have now is that the customer has a phone code on it so cant find out if its unlocked til he comes back, and p2k v2 the security code reset does not seem to work? well on this phone anyway

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cannot connect with spread cpu with new boxes ??	laythjg	SpiderMan	1	04-03-2009 14:14
N91 cannot be powered on at all	eugenemon	Nokia Hardware & Hardware Repair	1	12-27-2007 18:38
Sony Erricson Phone cannot connect with UFS3	hasheeb	UFS2 + UFS3-Tornadoflasher	6	05-15-2006 12:24
my phoenix cannot connect with 5185	GSMsell	Various CDMA/TDMA Cell Phones	6	08-09-2004 17:38
Even cannot connect with T10s:HEELP	GreEn	Old Ericsson Phones & Sony Phones	1	07-09-2000 13:23

02-20-2006, 21:20	#19 (permalink)
guolimm Major Poster Join Date: Dec 2005 Posts: 43 Member: 210861 Status: Offline Thanks Meter: 0	Tried v2.0, but not working sorry, neither is V3. Take your time and I will be waiting for V6.4

02-20-2006, 23:06	#22 (permalink)
zulea No Life Poster Join Date: Jul 2001 Location: Inside Raskal pocket Age: 54 Posts: 3,316 Member: 5325 Status: Offline Thanks Meter: 8,448	You said in previous post is a V3 phone, but from this log I see is a some 3G phone! Phone Model, Bootloader Version, Flash Version???

02-20-2006, 23:34	#24 (permalink)
essojay No Life Poster Join Date: Jul 2002 Location: uk Posts: 3,601 Member: 13808 Status: Offline Thanks Meter: 163	Maybe we should give Zulea some time, i think he has too much to grapple with now... many bugs to fix, but little by little, it should get better,... bR

02-21-2006, 14:25	#27 (permalink)
phone-company No Life Poster Join Date: Mar 2004 Location: Nederlands / Germany / Danmark Age: 51 Posts: 2,461 Member: 60001 Status: Offline Sonork: 100.106474 Thanks Meter: 151	zulea...with this programm seem download is not realy posible (don`t work with 3G phones)....Better use P2K seem_edit