Did Any one See this IR Station !! - Page 2 - GSM-Forum

FaRoOoO · 10-03-2006, 20:55

look what i received here

----------------------------------------------------

Dear A. Feras,

Your letter of inquiry regarding our product has been brought to our attention and we would like to thank you for your interest in RE-7500 Rework System.

I have enclosed the price for the RE-7500 Complete Rework System, which describe our new launching Promotion.

Unfortunately, we don't have a distributor yet in you country Dubai and all the orders will be Handled and Shipped directly from the Company HQ located in Hong Kong.
If you have any further questions about our Products, please don't hesitate to reply.

Thank you again for your interest.

The promotional unit price: 1980 Euro/pc (FOB Hong Kong)
Validity : Promotion Valid during October, 2006 only
Delivery : Within 2 weeks.

Best Regards,

Franziska Wurzbach
[email protected]
Jovy Systems Limited
Tel : +852 2166 8077
Fax: +852 2166 8999
www.jovy-systems.com

--------------------------------------------------

any one made any orders for it ?
the price is affordable but any one try it

b. regards
farooo

FaRoOoO · 10-05-2006, 18:53

@raheeb

we will waiting more informations.

b. regards
faroooo

Raheeeeb · 10-12-2006, 13:29

i got the machine from tow days

,

seem running perfect i thought its not fully controlled by pc. but its 100% controlld

uploading ready made or creating new profiles also availble on this RE7500

more and more soon

farry · 10-14-2006, 18:57

raheeb,can u explain the profiling a bit more!!also when u connect it to a pc can u see the component on pc?and du pick the component by hand?and lastly can u explain the pre heating,thnx in advance.

br

MobiFix · 10-14-2006, 22:59

Quote:

Originally Posted by farry

raheeb,can u explain the profiling a bit more!!also when u connect it to a pc can u see the component on pc?and du pick the component by hand?and lastly can u explain the pre heating,thnx in advance.

br

In Gereral , As i know, profiling mean to program the machine with desired values and the machine can control the power of the heaters to match your desired values ... IS this correct raheeb ?

Preheating mean to raise the tempreature of the whole PCB to approximatly 100 C before you concentrate on the desired component and this will avoid alot of problems can occur while procces.

zigma300 · 10-15-2006, 08:24

Quote:

Originally Posted by Raheeeeb

i got the machine from tow days

,

seem running perfect i thought its not fully controlled by pc. but its 100% controlld

uploading ready made or creating new profiles also availble on this RE7500

more and more soon

@Raheeb plz bro give more info about this machine

naughtycell · 10-19-2006, 10:52

Quote:

Originally Posted by Raheeeeb

i got the machine from tow days

,

seem running perfect i thought its not fully controlled by pc. but its 100% controlld

uploading ready made or creating new profiles also availble on this RE7500

more and more soon

@Raheeeb , plz also if you can tell about the stability of the machine (durability,acuracy etc ) because as posted by " A.Feras ( Farooo ) " , it is a HongKong made , with an excellent price compairing with the Ersa ( 2000 Euro !! ).

**RAJESH** · 10-27-2006, 11:19

mr Raheeeeb am interestd to buy thish machin, it is working perfecton leadfree serise ????????? like mainly bb5 .it"very hard to remove ics...

arshil_teli · 10-29-2006, 07:49

check this link for ir 7500 video demo
http://www.jovy-sys.com/video_stream.php

flyingdoctor · 11-17-2006, 21:57

Quote:

Originally Posted by **RAJESH**

mr Raheeeeb am interestd to buy thish machin, it is working perfecton leadfree serise ????????? like mainly bb5 .it"very hard to remove ics...

You are wasting your time and your money if you buy the RE7500. I have bought the AOYUE 720 for 1050 USD the RE7500 costs 2537 USD and the only differance is that the latter is computer controled. The 720 has its own control pannel and all varibls can be controled. There is feed back regulation which keeps constant temprature. Is controling from a PC realy worth the extra 1500 USD. Also the 2537 USD was under ocktober as a promotion. The RE7500 most probably costs more now. Aoyue also give exellent after sales support.

kostask · 11-18-2006, 12:34

how much money????????it is very good product

FaRoOoO · 11-18-2006, 18:56

Quote:

Originally Posted by flyingdoctor

You are wasting your time and your money if you buy the RE7500. I have bought the AOYUE 720 for 1050 USD the RE7500 costs 2537 USD and the only differance is that the latter is computer controled. The 720 has its own control pannel and all varibls can be controled. There is feed back regulation which keeps constant temprature. Is controling from a PC realy worth the extra 1500 USD. Also the 2537 USD was under ocktober as a promotion. The RE7500 most probably costs more now. Aoyue also give exellent after sales support.

friend u miss very important points..
you are companying RE-7500 with Aoyeu !!!!

personaly I used the Ayue, sorry to say its terrible and I throw it before getting mad.

one of the important difference between aoyue and re-7500 is the technolegy they used & the Temperatures monitoring.
with auoyue you can't remove metal parts or even you can't remove PF Ics because Aoyue use the reflected light IR -lamb IR- which is completely not safe on humands and can't remove all parts, thats why its not recommended to be used in service centers.
also with Aoyue you can't monitor the temperatures while reworking

you can't use it over lead-free boards ?!!!!

dont forget my friend that there is many features also in RE-7500 not exist with Aoyue
- like cooling stages
- online temperature monitoring while reworking
- automatic profiling to adjust the machine to work automaticly
- USB connection to add extra features and control
- your hands are free while operation

dont forget this one also.

no hard feelings

but RE-7500 i think is better than ersa maybe

flyingdoctor · 11-18-2006, 19:03

Quote:

Originally Posted by FaRoOoO

friend u miss very important points..
you are companying RE-7500 with Aoyeu !!!!

personaly I used the Ayue, sorry to say its terrible and I throw it before getting mad.

one of the important difference between aoyue and re-7500 is the technolegy they used & the Temperatures monitoring.
with auoyue you can't remove metal parts or even you can't remove PF Ics because Aoyue use the reflected light IR -lamb IR- which is completely not safe on humands and can't remove all parts, thats why its not recommended to be used in service centers.
also with Aoyue you can't monitor the temperatures while reworking

you can't use it over lead-free boards ?!!!!

dont forget my friend that there is many features also in RE-7500 not exist with Aoyue
- like cooling stages
- online temperature monitoring while reworking
- automatic profiling to adjust the machine to work automaticly
- USB connection to add extra features and control
- your hands are free while operation

dont forget this one also.

no hard feelings

but RE-7500 i think is better than ersa maybe

Ok thanks was it the 710 or the 720 that you had problems with.

Sakura · 12-05-2006, 23:25

Anyone known normal price for RE-7500?

Pasza · 12-09-2006, 22:08

Almost 2400 euro. Pozdro :-)

10-29-2006, 07:49	#24 (permalink)
arshil_teli Insane Poster Join Date: Jan 2003 Posts: 96 Member: 19726 Status: Offline Thanks Meter: 18	check out for video demo check this link for ir 7500 video demo http://www.jovy-sys.com/video_stream.php

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
did any one know how to unlock this samsung phone V920???	tsarkh	Samsung Flashers, Software, Firmware.	9	07-24-2007 06:57
did any one HAVE user manual FOR THIS BUGY BOX	sayedhas	UST Pro II	9	07-10-2007 08:02
did any one try the latest phoenix	waleedy	Nokia Base Band 5 ( BB-5 )	0	09-13-2006 19:13
did any one done this.......3100 ringer ...	c_ahmad79	Nokia Hardware & Hardware Repair	0	07-27-2006 00:52

10-03-2006, 20:55	#16 (permalink)
FaRoOoO Insane Poster Join Date: Jan 2002 Location: U.A.E. Age: 50 Posts: 89 Member: 8649 Status: Offline Thanks Meter: 7	look what i received here ---------------------------------------------------- Dear A. Feras, Your letter of inquiry regarding our product has been brought to our attention and we would like to thank you for your interest in RE-7500 Rework System. I have enclosed the price for the RE-7500 Complete Rework System, which describe our new launching Promotion. Unfortunately, we don't have a distributor yet in you country Dubai and all the orders will be Handled and Shipped directly from the Company HQ located in Hong Kong. If you have any further questions about our Products, please don't hesitate to reply. Thank you again for your interest. The promotional unit price: 1980 Euro/pc (FOB Hong Kong) Validity : Promotion Valid during October, 2006 only Delivery : Within 2 weeks. Best Regards, Franziska Wurzbach [email protected] Jovy Systems Limited Tel : +852 2166 8077 Fax: +852 2166 8999 www.jovy-systems.com -------------------------------------------------- any one made any orders for it ? the price is affordable but any one try it b. regards farooo

10-05-2006, 18:53	#17 (permalink)
FaRoOoO Insane Poster Join Date: Jan 2002 Location: U.A.E. Age: 50 Posts: 89 Member: 8649 Status: Offline Thanks Meter: 7	@raheeb we will waiting more informations. b. regards faroooo

10-14-2006, 18:57	#19 (permalink)
farry No Life Poster Join Date: Dec 2000 Location: uk Posts: 1,058 Member: 2899 Status: Offline Thanks Meter: 6	raheeb,can u explain the profiling a bit more!!also when u connect it to a pc can u see the component on pc?and du pick the component by hand?and lastly can u explain the pre heating,thnx in advance. br

10-27-2006, 11:19	#23 (permalink)
RAJESH Registered User Join Date: Sep 2004 Location: INDIA Age: 48 Posts: 818 Member: 83237 Status: Offline Sonork: 100.1577738 Thanks Meter: 61	mr Raheeeeb am interestd to buy thish machin, it is working perfecton leadfree serise ????????? like mainly bb5 .it"very hard to remove ics...

11-18-2006, 12:34	#26 (permalink)
kostask Freak Poster Join Date: Sep 2005 Posts: 119 Member: 177580 Status: Offline Thanks Meter: 6	how much money????????it is very good product

12-05-2006, 23:25	#29 (permalink)
Sakura No Life Poster Join Date: Sep 2002 Location: Poland Posts: 638 Member: 15521 Status: Offline Thanks Meter: 57	Anyone known normal price for RE-7500?

12-09-2006, 22:08	#30 (permalink)
Pasza Freak Poster Join Date: Feb 2004 Location: Gdynia, Poland Age: 46 Posts: 119 Member: 56168 Status: Offline Thanks Meter: 4	Almost 2400 euro. Pozdro :-)