new clip for panasonic x60 and sharp gx20/30 - GSM-Forum

Gsm2Extreme · 10-18-2004, 15:01

I have bougt a clip but no manual included...

someone knows how to use this clip or some kind of manual?

thanks in advance

p.s. sorry for bad quality picture, its from a 6230

silvester · 10-18-2004, 22:06

For SharpGX30/TM100 clip on,phone on press midlle button on clip 1time,you will see xxxx
on display,press 1,then 99,top right button on phone,3 for unlock 1 for security code,again top right button,wait till PLEASE ANY KEY will appear on display,press top right button 3times,phone turns off.Done

For Sharp GX20 clip on,phone on press middle button on clip 1time,you will see diag mode,press same button again,remove battery from phone and put back(at the same time do not unplugg phone from clip),power phone and see xxxx on display,then do exactly same like for GX30.Enjoy

Regards

Gsm2Extreme · 10-18-2004, 22:48

Quote:

Originally Posted by silvester

For SharpGX30/TM100 clip on,phone on press midlle button on clip 1time,you will see xxxx
on display,press 1,then 99,top right button on phone,3 for unlock 1 for security code,again top right button,wait till PLEASE ANY KEY will appear on display,press top right button 3times,phone turns off.Done

For Sharp GX20 clip on,phone on press middle button on clip 1time,you will see diag mode,press same button again,remove battery from phone and put back(at the same time do not unplugg phone from clip),power phone and see xxxx on display,then do exactly same like for GX30.Enjoy

Regards

thank you! Do you also know procedure for panasonic x60?

silvester · 10-19-2004, 00:10

As I remember from manual,clip on phone on press first button on clip from left to right,1st led starts to blink,wait untill light is on permanently and job is done obviously,but I never try it on X60.So try yourself.

Regards

aptech_knight · 10-19-2004, 00:16

anyway can you tell me the name of this clip silvester ????

silvester · 10-19-2004, 00:31

Quote:

Originally Posted by aptech_knight

anyway can you tell me the name of this clip silvester ????

I do not suppose,that it named somehow,just Sharp GX10i,20,30,TM100 and Panasonic X60 unlock clip,about panasonic I can not tell something,but Sharp works pretty well.

Regards

Secgsm · 10-19-2004, 00:32

if you are interessed for this clip contact me. i have in stock..
name fo this clip hmm.. what you like ? hehe..
look here :
http://gsmhardware.com/pictureexstra/Afb057.jpg
http://gsmhardware.com/pictureexstra/panshow/Afb000.jpg

best regards
Secgsm
[email protected]

Quote:

Originally Posted by aptech_knight

anyway can you tell me the name of this clip silvester ????

Gsm2Extreme · 10-19-2004, 18:21

Quote:

Originally Posted by Secgsm

if you are interessed for this clip contact me. i have in stock..
name fo this clip hmm.. what you like ? hehe..
look here :
http://gsmhardware.com/pictureexstra/Afb057.jpg
http://gsmhardware.com/pictureexstra/panshow/Afb000.jpg

best regards
Secgsm
[email protected]

@Secgsm, could you send me the manual please?
[email protected]

p.s. I think my reseller bought it from you, a guy from holland??

Secgsm · 10-19-2004, 22:05

hello Gsm2Extreme, ok i will done, yes my partner sale my tools in netherlands.
ok check you mail. i have now busy after 1-2 hour i will send manual by mail.
best regards
Secgsm
[email protected]

Quote:

Originally Posted by Gsm2Extreme

@Secgsm, could you send me the manual please?
[email protected]

p.s. I think my reseller bought it from you, a guy from holland??

Gsm2Extreme · 10-20-2004, 19:55

X60 unlocking... tried 20 times... not working

Gx10i unlocking... after pressin 2 times on 2nd button, phone is in diag mode... power down phone.. power on phone no XXXX showing

what is te problem?

i have 2 pcs. of this clip so one of them should work.. but no

Secgsm · 10-20-2004, 21:32

clip tested on pan. x60..

manual : http://www.gsmhardware.com/combiclipmanual.htm
best regards
Secgsm

Gsm2Extreme · 10-21-2004, 11:19

in manual for unlocking gx10i it says: "press top right button to power off phone"
that's also not working.... the only way to power down the phone is by pressing the red power button.

If i then power on the phone XXXX is not showing...

fonedoctorjnr · 10-21-2004, 16:43

X60 instructions

1) Put 4 fully charged AA Batteries in Uni-Clip
2) Make sure the phone is off without a sim card in.
3) Put the phone into test mode by holding down the # and * key and then the power button. You will see a faint back light on the phones screen. The phone is now in test mode.
4) Connect the X60 cable to the Uni-Clip and then to the phone
5) Turn Uni-Clip on using the black switch on the side of the clip
6) Press the Uni-Clip unlock button
7) The Uni-Clips lights will turn off,
8) One light will show on Uni-Clip to indicate the unlocking process has started.
9) Then both lights will be on to show the unlocking process is completed. The phones back light will go off. The phone is now unlocked.

spooneroon

10-20-2004, 21:32	#11 (permalink)
Secgsm Freak Poster Join Date: Jan 2004 Location: netherlands Age: 42 Posts: 417 Member: 50272 Status: Offline Thanks Meter: 37	clip tested on pan. x60.. manual : http://www.gsmhardware.com/combiclipmanual.htm best regards Secgsm Last edited by Secgsm; 10-20-2004 at 23:11.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PANSOLAR, the new clip for Panasonic and much more	Raskal	Main Sales Section	0	04-25-2006 21:56
Panasonic x70 and Sharp GX30 with new Griffin??	UnlockBR	Griffin	18	09-21-2004 07:47
Brand New Nokias (7600, 6610) ; Samsungs (E700, P400) and sharp GX-30	chrisbeckett	Sell ur Old and Used Stuff	13	06-08-2004 18:59
Bad activation Status on C62 and Sharp Gx20	tiagomanson	Griffin	20	02-15-2004 21:13

10-18-2004, 22:06	#2 (permalink)
silvester No Life Poster Join Date: Oct 2001 Location: Hofburg Posts: 564 Member: 6845 Status: Offline Thanks Meter: 30	For SharpGX30/TM100 clip on,phone on press midlle button on clip 1time,you will see xxxx on display,press 1,then 99,top right button on phone,3 for unlock 1 for security code,again top right button,wait till PLEASE ANY KEY will appear on display,press top right button 3times,phone turns off.Done For Sharp GX20 clip on,phone on press middle button on clip 1time,you will see diag mode,press same button again,remove battery from phone and put back(at the same time do not unplugg phone from clip),power phone and see xxxx on display,then do exactly same like for GX30.Enjoy Regards

10-19-2004, 00:10	#4 (permalink)
silvester No Life Poster Join Date: Oct 2001 Location: Hofburg Posts: 564 Member: 6845 Status: Offline Thanks Meter: 30	As I remember from manual,clip on phone on press first button on clip from left to right,1st led starts to blink,wait untill light is on permanently and job is done obviously,but I never try it on X60.So try yourself. Regards

10-19-2004, 00:16	#5 (permalink)
aptech_knight Freak Poster Join Date: May 2004 Location: Viet Nam Age: 40 Posts: 134 Member: 67130 Status: Offline Thanks Meter: 0	anyway can you tell me the name of this clip silvester ????

10-20-2004, 19:55	#10 (permalink)
Gsm2Extreme No Life Poster Join Date: Mar 2004 Location: The Netherlands Age: 40 Posts: 632 Member: 58493 Status: Offline Thanks Meter: 24	X60 unlocking... tried 20 times... not working Gx10i unlocking... after pressin 2 times on 2nd button, phone is in diag mode... power down phone.. power on phone no XXXX showing what is te problem? i have 2 pcs. of this clip so one of them should work.. but no

10-21-2004, 11:19	#12 (permalink)
Gsm2Extreme No Life Poster Join Date: Mar 2004 Location: The Netherlands Age: 40 Posts: 632 Member: 58493 Status: Offline Thanks Meter: 24	in manual for unlocking gx10i it says: "press top right button to power off phone" that's also not working.... the only way to power down the phone is by pressing the red power button. If i then power on the phone XXXX is not showing...

10-21-2004, 16:43	#13 (permalink)
fonedoctorjnr Insane Poster Join Date: May 2003 Posts: 82 Member: 29063 Status: Offline Thanks Meter: 0	X60 instructions 1) Put 4 fully charged AA Batteries in Uni-Clip 2) Make sure the phone is off without a sim card in. 3) Put the phone into test mode by holding down the # and * key and then the power button. You will see a faint back light on the phones screen. The phone is now in test mode. 4) Connect the X60 cable to the Uni-Clip and then to the phone 5) Turn Uni-Clip on using the black switch on the side of the clip 6) Press the Uni-Clip unlock button 7) The Uni-Clips lights will turn off, 8) One light will show on Uni-Clip to indicate the unlocking process has started. 9) Then both lights will be on to show the unlocking process is completed. The phones back light will go off. The phone is now unlocked. spooneroon