****Read About New philips phone****

[PADERF]

@For all
all listed model in philips or other soft are worked 1000 % you need just take smal time and read instruction about new philips .. i repeat 355 or 535 or 639 or any other new phone are supported 10000 % many member can confirm this too.. About waranty for 355 /350 you can't flash phone without opening phone using delock or redbox or other product.
Plz note if you got any phone listed above and can't read code( i mean you read just imei and you get communication error after) , plz read full flash and send it to us before flash it, for i can add it in next update and you will not be obligated to use UART port in mainboard.
PS : same phone like 350/355/535 have buged frimware .. this mean althought you read code by soft or get code from provider when you enter it manually and reboot, phone will Hang ..than need use procedure explain in soft when select aproprited model, all repair flash are available also with all knowne language pack.
If you can't enter TAT mode plz verify just your cable ... phone must enter TAT MODE even if it's new model that's not listed in soft.
Hope that my word resolve your problem.
Happy New year to all forum member.

Regards,
Paderf.

[PolyRing]

@Paderf
I have tried using the same cable for 355 and 650. For 355, I can successfully enter TAT mode and read out IMEI and other Lock information, while in 650 I get communication error after TAT mode OK. Presumably my cable is working, please help me identify the problem. Also, can you show us the proper procedure to flashing these phones ? Because I can't even get Connected, always "Power on Phone: ERROR"
I have sent 650 flash bin to Julvir last week which is exactly the same one in your download area, so I believe that you have already tested it and RedBox should be working on these models. I guess there are something we have to do with setup or some procedures we have to take before it can work properly, please check.
Thank you very much.

[bakarioss]

I would like to thnk Mr PADERF to clear this point , I really I agree REDBOX the only solution can repair and unlock 639 for others models all ok , I have only one point just about new model 7xx and 8xx the update on the way??
bakarioss

[moustafatch]

Originally Posted by PADERF

@For all
all listed model in philips or other soft are worked 1000 % you need just take smal time and read instruction about new philips .. i repeat 355 or 535 or 639 or any other new phone are supported 10000 % many member can confirm this too.. About waranty for 355 /350 you can't flash phone without opening phone using delock or redbox or other product.
Plz note if you got any phone listed above and can't read code( i mean you read just imei and you get communication error after) , plz read full flash and send it to us before flash it, for i can add it in next update and you will not be obligated to use UART port in mainboard.
PS : same phone like 350/355/535 have buged frimware .. this mean althought you read code by soft or get code from provider when you enter it manually and reboot, phone will Hang ..than need use procedure explain in soft when select aproprited model, all repair flash are available also with all knowne language pack.
If you can't enter TAT mode plz verify just your cable ... phone must enter TAT MODE even if it's new model that's not listed in soft.
Hope that my word resolve your problem.
Happy New year to all forum member.
Regards,
Paderf.

I just recived 355
Reading Imei..OK!
IMEI : 353896-00-xxxxxxxxxxx
Reading Codes..
Reading Lang Pack..OK!
Set to Default ...OK!
Reading Imei..
Communication Error !!


where to send the flash ?

phone ask for pck