myc2-3 testpoint

[tarekhas]

i need myc2-3 good testpoint
Searching Phone..Found.
Reading Phone Info : BAD CONNECTION CHECK YOUR TEST POINT!!!
- Phone Firmware : 5721311084563 JA3,WA: 130705 1318
- Phone Imei: 355xxxxxxxxxxxxxxxx
- Hash Table : C0 48 01
- Phone Code : 00000000
Searching Phone..Found.
Reading Phone Info : BAD CONNECTION CHECK YOUR TEST POINT!!!
- Phone Firmware : 5721311084563 JA3,WA: 130705 1318
- Phone Imei: 355xxxxxxxxxxxxx
- Hash Table : C0 48 01
- Phone Code : 00000000
Searching Phone..Found.
Reading Phone Info : BAD CONNECTION CHECK YOUR TEST POINT!!!
- Phone Firmware : 5721311084563 JA3,WA: 130705 1318
- Phone Imei: 355945000254554
- Hash Table : C0 48 01
- Phone Code : 00000000
Searching Phone..Found.
Reading Phone Info : BAD CONNECTION CHECK YOUR TEST POINT!!!
- Phone Firmware : 5721311084563 JA3,WA: 130705 1318
- Phone Imei: 35xxxxxxxxxxxxxxx
- Hash Table : C0 48 01
- Phone Code : 00000000

[hitibiti]

this test point work 100%
freind pleas telme you have this error :
BAD CONNECTION CHECK YOUR TEST POINT!!!
after 20% or 40% or what ?

[Uvedovle]

Me after 20% says check testpoint,testpoint have been soldered to phone.

What´s the problem?

[MB code]

Hello

We solve some customers problem by Cutting the cable , juste make the cable a little smaller and make a correct test point , for sure you can succes

Be-Sales Team

[Multi-COM]

no need to make any cutting igf you use TP board

[Uvedovle]

Phone is Myc2-3m

Reading Phone Info : BAD CONNECTION CHECK YOUR TEST POINT!!!
- Phone Firmware : 5371204901568 JA3,XC: 270905 1401
- Phone Imei: 355945002098132
- Hash Table : 20 28 01
- Phone Code : 00000000
Searching Phone..Found.
Reading Phone Info : BAD CONNECTION CHECK YOUR TEST POINT!!!
- Phone Firmware : 5371204901568 JA3,XC: 270905 1401
- Phone Imei: 355945002098132
- Hash Table : 20 28 01
- Phone Code : 00000000
Searching Phone..Found.
Reading Phone Info : BAD CONNECTION CHECK YOUR TEST POINT!!!
- Phone Firmware : 5371204901568 JA3,XC: 270905 1401
- Phone Imei: 355945002098132
- Hash Table : 20 28 01
- Phone Code : 00000000

[Mgsm]

I have the same problem.

B.R.

[tarekhas]

i used this testpoint put say
Reading Phone Info : BAD CONNECTION CHECK YOUR TEST POINT!!!
- Phone Firmware : 5721311084563 JA3,WA: 130705 1318
- Phone Imei: 355xxxxxxxxxxxxxxxx
- Hash Table : C0 48 01
- Phone Code : 00000000

[Uvedovle]

Please Hitibiti, tell us solution.



Wbr

[hitibiti]

for error : Reading Phone Info : BAD CONNECTION CHECK YOUR TEST POINT
in 20% that's mean 100% test point problem
i use my cable for C2-2 and sold wire , first time he dind't worck i just cut cable ( 25cm , now 5or 7Cm) and he connect without any error , and i unlock many C2-3 some version not supported i use methoide 2 and i succed
for freind witch have error test point after 40% that's mean you have to repat action many time for succed ! but in 80% cabel problem cose
cables must be short less than 15Cm as i knwo

[Uvedovle]

Cable is no more than 5cm, i´ll check it when i get other phone.


Thanks for your help.


Wbr

[Multi-COM]

all problems are caused by soldering....communication in these phones are very senstivei and that why (not only for no solderign, no sodler to PCB for clietn phones) are importnat...that why the bets it's use TP adapters - then you don't need any cutting of cables.... ORIGINAL TP boards recommedned by SWS Tema and approved you can find here http://www.multi-com.pl/index.php/en...id_gr,312.html

[Uvedovle]

Specially for Hitibiti:

Solved soldering ground cable to phone.



Wbr

[gabiz_ro]

Originally Posted by Uvedovle

Specially for Hitibiti:

Solved soldering ground cable to phone.



Wbr

same for me,cable to gnd and all ok.thanks Uvedovle for info.

[kenichi]

solution was posted by me time before, here and in other forums Please search!!!