using nec com with fuirious - GSM-Forum

bayleaf · 08-06-2005, 08:30

HOW ? when i connect a phone in this case E313 to repair imei just error comes up. im useing the com cable that came with furious marked server cable is this right ? if not what cable do i need ?

**.:hack3r2k:.** · 08-06-2005, 11:44

Quote:

Originally Posted by bayleaf

HOW ? when i connect a phone in this case E313 to repair imei just error comes up. im useing the com cable that came with furious marked server cable is this right ? if not what cable do i need ?

What error !? Must use Nec server cable +9V.

Br

bayleaf · 08-06-2005, 18:47

says reading then after few seconds error, the nec cable which says server which came with box from new has a rj45 plug on it so how can i insert a 9v supply ? , in addition to this i have a sharp gx 30 com cable with crock clip connections on it will that work ?

**.:hack3r2k:.** · 08-06-2005, 22:13

Depends not all work. try serial cable that camed with +5v enable or try ir crock cable by connecting crocks to + - of a 9V battery or simpley use USB.

Br

F C · 08-06-2005, 22:50

Quote:

Originally Posted by bayleaf

says reading then after few seconds error, the nec cable which says server which came with box from new has a rj45 plug on it so how can i insert a 9v supply ? , in addition to this i have a sharp gx 30 com cable with crock clip connections on it will that work ?

SHARP GX30 SERIAL CABLE WITH EXTERNAL SUPPLY 9V - WORKS FINE !!

REGARDS
GOHAR

bayleaf · 08-06-2005, 22:52

thanks for that the gx30 com cable worked a treat with 9v i was only using 3.7 from another nec bat i did not want to risk 9v first , i have learned the hard way in the past !!

**.:hack3r2k:.** · 08-06-2005, 22:54

Quote:

Originally Posted by bayleaf

thanks for that the gx30 com cable worked a treat with 9v i was only using 3.7 from another nec bat i did not want to risk 9v first , i have learned the hard way in the past !!

If we advice you to use +9V we do it from knowledge not from lucky guesses

Br

08-06-2005, 08:30	#1 (permalink)
bayleaf Freak Poster Join Date: Oct 2001 Location: suffolk uk Posts: 332 Member: 6982 Status: Offline Thanks Meter: 6	using nec com with fuirious HOW ? when i connect a phone in this case E313 to repair imei just error comes up. im useing the com cable that came with furious marked server cable is this right ? if not what cable do i need ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
serial com with GSM using mcore.dll	electronsss	GSM Mobile Links	1	03-18-2009 02:22
Problem with Nec Com Ports in Device Manager.	Sir_GsM	NEC	9	05-17-2005 07:21
need help with use nec super tool	markLEE	NEC	6	05-03-2005 01:20
NEC COM or USB service cable for sell.	pitone02	Sell ur Old and Used Stuff	0	04-12-2005 14:19
COM port cable for V60/V66/V70 use MAX232 ,work with victor software.	Quang Thao	Motorola P2k	14	11-02-2002 00:24

08-06-2005, 18:47	#3 (permalink)
bayleaf Freak Poster Join Date: Oct 2001 Location: suffolk uk Posts: 332 Member: 6982 Status: Offline Thanks Meter: 6	says reading then after few seconds error, the nec cable which says server which came with box from new has a rj45 plug on it so how can i insert a 9v supply ? , in addition to this i have a sharp gx 30 com cable with crock clip connections on it will that work ?

08-06-2005, 22:13	#4 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,976 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	Depends not all work. try serial cable that camed with +5v enable or try ir crock cable by connecting crocks to + - of a 9V battery or simpley use USB. Br

08-06-2005, 22:52	#6 (permalink)
bayleaf Freak Poster Join Date: Oct 2001 Location: suffolk uk Posts: 332 Member: 6982 Status: Offline Thanks Meter: 6	thanks for that the gx30 com cable worked a treat with 9v i was only using 3.7 from another nec bat i did not want to risk 9v first , i have learned the hard way in the past !!