Unlock NEC 808 - GSM-Forum

vish_thakkar786 · 11-17-2004, 13:26

Can anyone help with the schematics for nec 808 for furious

shakeelajmal · 11-18-2004, 09:17

An open cable (Without the mobile connector on the other end) in Furious is for NEC 606 and 808 models , you have to unlock it by connecting cable to test points and Rx, Tx, and Gnd cables are in the testpoint diagram (same as 606)

nen77 · 11-18-2004, 16:16

do i have to use batery
....
is that the cable ..whit tiny conectors ..do we need batery.....
or i have to use my old software .....

shakeelajmal · 11-19-2004, 09:33

you have to connect battry to power on the phone and also need to solder then test point cable to the small test points , becarefull you can damage your phone, if you don't have experience of soldering get some one else help !! after connecting put battry on the battry terminals and just click unlock !! you are done !!

Good Luck
Shakeel

vish_thakkar786 · 11-20-2004, 08:24

it says remove battery but still the handset is locked

nen77 · 12-05-2004, 14:09

Quote:

Originally Posted by shakeelajmal

you have to connect battry to power on the phone and also need to solder then test point cable to the small test points , becarefull you can damage your phone, if you don't have experience of soldering get some one else help !! after connecting put battry on the battry terminals and just click unlock !! you are done !!

Good Luck
Shakeel

it is like old metod ..(i unlocked few nec 606 )
i belived that the cable have posibility to be used whithout batery....
...

i have build an adaptor to atach the batery without closing the phone

nobal1976 · 02-27-2005, 12:52

how can securty code read in 808 nec?

steveit · 10-15-2005, 23:23

Quote:

Originally Posted by vish_thakkar786

Can anyone help with the schematics for nec 808 for furious

Visit my site , you have free soft and fre scheme and photo for nec and other here :
www.mobileunlock.cc
go to free soft !

Itanium · 10-15-2005, 23:47

Steve, sempre pronto a farti pubblicità, eh ???

9555021 · 01-16-2006, 12:38

Quote:

Originally Posted by shakeelajmal

you have to connect battry to power on the phone and also need to solder then test point cable to the small test points , becarefull you can damage your phone, if you don't have experience of soldering get some one else help !! after connecting put battry on the battry terminals and just click unlock !! you are done !!

Good Luck
Shakeel

can u help me to upload a tigers pic under my nick?

11-17-2004, 13:26	#1 (permalink)
vish_thakkar786 Freak Poster Join Date: Sep 2004 Location: india Posts: 200 Member: 83511 Status: Offline Thanks Meter: 34	Unlock NEC 808 Can anyone help with the schematics for nec 808 for furious

11-18-2004, 16:16	#3 (permalink)
nen77 Freak Poster Join Date: Mar 2003 Age: 46 Posts: 405 Member: 25392 Status: Offline Thanks Meter: 10	please be more specific do i have to use batery .... is that the cable ..whit tiny conectors ..do we need batery..... or i have to use my old software .....

11-20-2004, 08:24	#5 (permalink)
vish_thakkar786 Freak Poster Join Date: Sep 2004 Location: india Posts: 200 Member: 83511 Status: Offline Thanks Meter: 34	unlock nec 808 Y it says remove battery but still the handset is locked

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nec E122 and nec 808	The Razor	NEC	0	04-17-2008 13:45
Unlocking NEC 808	stfbj321	Redbox	3	04-25-2005 10:12
Unlocking Of Nec 808 - Procedure	afloat	Redbox	0	08-01-2004 21:10
Nec Unlocking-606/808	krusty.spritz	Main Sales Section	0	05-21-2004 20:57

11-18-2004, 09:17	#2 (permalink)
shakeelajmal No Life Poster Join Date: Feb 2004 Location: PaKiStAn Age: 44 Posts: 1,865 Member: 51639 Status: Offline Thanks Meter: 76	An open cable (Without the mobile connector on the other end) in Furious is for NEC 606 and 808 models , you have to unlock it by connecting cable to test points and Rx, Tx, and Gnd cables are in the testpoint diagram (same as 606)

11-19-2004, 09:33	#4 (permalink)
shakeelajmal No Life Poster Join Date: Feb 2004 Location: PaKiStAn Age: 44 Posts: 1,865 Member: 51639 Status: Offline Thanks Meter: 76	you have to connect battry to power on the phone and also need to solder then test point cable to the small test points , becarefull you can damage your phone, if you don't have experience of soldering get some one else help !! after connecting put battry on the battry terminals and just click unlock !! you are done !! Good Luck Shakeel

02-27-2005, 12:52	#7 (permalink)
nobal1976 No Life Poster Join Date: Jul 2004 Location: Gujranwala Pakistan Age: 48 Posts: 758 Member: 71190 Status: Offline Sonork: 100.1580485 Thanks Meter: 87	how can securty code read in 808 nec?

10-15-2005, 23:47	#9 (permalink)
Itanium Freak Poster Join Date: Dec 2004 Age: 44 Posts: 424 Member: 100089 Status: Offline Thanks Meter: 1	Steve, sempre pronto a farti pubblicità, eh ???