P3-Card Upgrade v1.0.4 (Important, read it !!!)

[Haicha]

Originally Posted by ricardoz

Ok updater screen shot here



then disassembly box etc. and sat says :


so im trying to create account without succes thanxs for help

Friend! If you can I try Help you by Teamviewer.Give me your Contact
Here
Regards
Haicha

[wendigo]

Originally Posted by libertycell

and my serial box is diferent in each software , why??

Hi libertycell,

As im watching in server, this box has never been registered.
Can you confirm me if Im right ???

Btw, i modified server, try to register your metalbox now (with METAL version v269)
After registration finished, proceed with LINK process (with last updater v1.0.4)
Confirm me if worked now, if not, will fix tomorrow manually and contact you via PM

With best regards,
\W3nd|g0

[wendigo]

Originally Posted by ricardoz

Ok updater screen shot here



then disassembly box etc. and sat says :


so im trying to create account without succes thanxs for help

Hi Ricardoz,

I checked server and fixed your problem.
Now you can process as normal.

1.- Extract dongle and pic
2.- Put inside your P3card
3.- Uninstall METAL software
4.- Install last version v2.7.6
5.- Run PolarSAT
6.- Put your user and pass (r.......z/m........a)
7.- Request certificate
8.- Enjoy !!

With best regards,
\W3nd|g0

[libertycell]

Originally Posted by wendigo

Hi libertycell,

As im watching in server, this box has never been registered.
Can you confirm me if Im right ???

Btw, i modified server, try to register your metalbox now (with METAL version v269)
After registration finished, proceed with LINK process (with last updater v1.0.4)
Confirm me if worked now, if not, will fix tomorrow manually and contact you via PM

With best regards,
\W3nd|g0

my box was register


but i not used since much time

[libertycell]

i try now , but no sucess register

[wendigo]

Originally Posted by Dunviro

Hi i have the same problem, error E04, i try all things people say here and still...

My serial number box is 20000516, what i can do?

thanks

Hi Dunviro,

Do this, make process with last version of UPGRADER (v104)
After this, if appears error make screenshot and put me here (i need full info)

With best regards,
\W3nd|g0

[libertycell]

Originally Posted by wendigo

Hi libertycell,

As im watching in server, this box has never been registered.
Can you confirm me if Im right ???

Btw, i modified server, try to register your metalbox now (with METAL version v269)
After registration finished, proceed with LINK process (with last updater v1.0.4)
Confirm me if worked now, if not, will fix tomorrow manually and contact you via PM

With best regards,
\W3nd|g0

no work bro

[wendigo]

Originally Posted by libertycell

i try now , but no sucess register

Can you try to answer me at sonork ?
Im writing you there ...

[libertycell]

can you register for me in your server???

[SUUNNYY]

HI FRIEND DID YOU DO ALL STEPS EXPLAINED BY WENDIGO ???

PROBLEM SHOULD BE FIXED AS INSIDE SERVER ALL SORTED. [ PLEASE DOUBLE CHECK ]

REGARDS

««««suunnyy»»»»

[ polar team ]

[libertycell]

Wendigo already help me thanks in advanced

[ricardoz]

Originally Posted by wendigo

Hi Ricardoz,

I checked server and fixed your problem.
Now you can process as normal.

1.- Extract dongle and pic
2.- Put inside your P3card
3.- Uninstall METAL software
4.- Install last version v2.7.6
5.- Run PolarSAT
6.- Put your user and pass (r.......z/m........a)
7.- Request certificate
8.- Enjoy !!

With best regards,
\W3nd|g0

Thxxxsss is working now , Polar Box the best support on market , i have furious gold too i think the worst support on gsm market jeje