KulanKendi Vip Client Ver 1.19 Ready !

[gsminfo]

Unlocking on-line by USB Cable only .

Skypephone 1 ( Amoi WP-S1 )
Skypephone 2 ( Amoi WP-S2 )
Skypephone 3 ( INQ-1 )
MOMO Designe MD-2 ( ZTE F232 )
Plusfon 601i ( ZTE F230 )

For more mnformation check official web page - www.KULANKENDI.com

* AMOI WP-S1/WP-S2 ENG Unlocking Instructions *

1. Power on phone without simcard and wait till show "insert sim"
2. Click READ INFO and see if phone/firmware is supported
3. When is supported then click UNLOCK and wait(DO NOT TOUCH PHONE)
4. Phone should be unlocked

TIP1: If phone can not be detected(communication stop at about 20%) then
change MODEM settings in phone menu "Connectivity\Modem Connection" to "Via USB"

TIP2: When TIP1 not working use "Enable USB Modem" option. Please note this option will enable Modem communication on USB butsettings in phone menu "Connectivity\Modem Connection\Via USB" should be set manually after


* INQ ENG Unlocking Instructions *

1. Power on phone without simcard and wait till show "insert sim"
2. Click READ INFO and see if phone/firmware is supported
3. When is supported then click UNLOCK and wait(DO NOT TOUCH PHONE)
4. Phone should be unlocked

TIP1: If phone can not be detected(communication stop at about 20%) then
change MODEM settings in phone menu "Settings\Advanced\Connectivity\Modem Connect" to "Via USB"

TIP2: When TIP1 not working use "Enable USB Modem" option. Please note this option will enable Modem communication on USB butsettings in phone menu "Settings\Advanced\Connectivity\Modem Connect > Via USB" should be set manually after


* ZTE F230(aka Plusfon 601i) ENG Unlocking Instructions *

1. Power on phone with or without simcard
2. Connect phone to USB cable and intall drivers from phone drive
3. Click READ INFO and see if phone and compilation are supported
4. If compilation is not supported then DUMP reading will start and when finish will show what files we need for analize.
5. When is supported then select "Read Unlock Codes" and click EXECUTE and wait(DO NOT TOUCH PHONE)
6. Insert other operator simcard and enter unlock code.


* ZTE F232(MOMO Design) ENG Unlocking Instructions *

1. Power on phone with or without simcard
2. Connect phone to USB cable and intall drivers from phone drive
3. Click READ INFO and see if phone and compilation are supported
4. If compilation is not supported then DUMP reading will start and when finish will show what files we need for analize.
5. When is supported then select "Read Unlock Codes" and click EXECUTE and wait(DO NOT TOUCH PHONE)
6. Enter combination in phone: *983*865625 and enter unlock code.